• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.907-909
• /
• 2001

This paper proposes the analysis method for the pole change motor that is a capacitor-run single-phase induction motor. As the Magneto motive force(MMF) at 2-role becomes severe distortion, it is necessary to consider the harmonics for the characteristic analysis of the motor. Therefore, the performance of motor is analyzed by equivalent circuit considering the harmonic components. The validity of the proposed analysis method for the pole change motor is verified through simulations and experimental results.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1600-1602
• /
• 2007

TPS (Temperature Programmed Sublimation) technology is known to research for the plane evaporation of the organic film.[5] Using TPS technology, the plane source evaporation of NPB organic film has been studied for the first time. The NPB organic film consists of nano scale film phase and bulk phase on a substrate. The 400 ${\AA}$ in film phase thickness of NPB sublimates at the $175^{\circ}$ of the Ta made metal plate. It was proved that the sublimation temperature of the organic film has much lower than that of the organic powder. ($130^{\circ}$ is lower for Alq3 and $90^{\circ}$ is lower for NPB.)

• 정보학연구
• /
• 제12권4호
• /
• pp.11-17
• /
• 2009

In this paper, frequency synthesizer for radar system is designed and developed. Optimizing the phase noise and lock time, each module is designed as two-type PLL circuit, and then the performance of PLL frequency synthesizer is compared. The experiment result shows the lock time of 70 usec, the phase noise of less then 100 dBc, the bandwidth above 500MHz.

• Water Engineering Research
• /
• 제1권4호
• /
• pp.293-298
• /
• 2000

Optimal values of $\alpha$ characterizing the linear dispersion property in the modified Boussinesq equations are determined by minimizing the combined relative errors of the phase and group velocities. The value of $\alpha$ is fixed in previous studies, whereas it is varying in the present study. The phase and group velocities are calculated by using variable $\alpha$ and compared to those of the linear Stokes wave theory and previous studies. It is found that the present study produces the best match to the linear Stokes theory.

• 한국분말재료학회지
• /
• 제22권3호
• /
• pp.175-180
• /
• 2015

In this study, ternary compound Max Phase $Ti_2AlC$ material was mixed by 3D ball milling as a function of ball milling time. More than 99.5 wt% pure $Ti_2AlC$ was synthesized by using spark plasma sintering method at 1000, 1100, 1200, and $1300^{\circ}C$ for 60 min. The material characteristics of synthesized samples were examined with relative density, hardness, and electrical conductivity as a function of sintering temperature. The phase composition of bulk was identified by X-ray diffraction. On the basis of FE-SEM result, a terraced structures which consists of several laminated layers were observed. And $Ti_2AlC$ bulk material obtained a vickers hardness of 5.1 GPa at the sintering temperature of $1100^{\circ}C$.

• International Journal of Ocean System Engineering
• /
• 제1권4호
• /
• pp.205-210
• /
• 2011

High data-rate underwater communications is demanded. This demand imposes stringent requirements on underwater communication equipment of phase-locked-loop (PLL). Phase noise in PLL is unwanted and unavoidable. In this paper, we investigate the PLL phase noise effect on high order QAM for underwater communication systems. The phase noise model using power spectral density is adopted for performance evaluation. The phase noise components considered in PLL are reference oscillator, voltage controlled oscillator (VCO), filter and divider. The filters in PLL noise are assumed to be second order active and passive low pass filters. Through simulation, we analyze the phase noise characteristics of the four components and then investigate the performance improvement factor of each component. Consequently, we derive specifications of VCO, phase detector, divider to meet performance requirement of high data-rate communication using QAM under phase noise influence.

• Journal of Electrical Engineering and Technology
• /
• 제10권3호
• /
• pp.905-915
• /
• 2015

Two PWM techniques using space vector pulse-width modulation (SVPWM) are proposed for a two-phase permanent magnet synchronous motor (PMSM) driven by a two-phase eight-switch inverter. A two-phase motor with two symmetric stator windings is usually driven by a two-phase four-, six-, or eight-switch inverter. Compared with a four- and six-switch inverter, a two-phase eight-switch inverter can achieve larger power output. For two-phase motor drives, the SVPWM technique achieves more efficient DC bus voltage utilization and less harmonic distortion of the output voltage. For a two-phase PMSM fed by a two-phase eight-switch inverter under a normal SVPWM scheme, each of the eight PWM trigger signals for the inverter have to be changed twice in a cycle, causing a higher PWM frequency. Based on the normal SVPWM scheme, two effective SVPWM schemes are investigated in order to reduce the PWM frequency by rearranging four comparison values, while achieving the same function as the normal PWM scheme. A detailed explanation of the normal and two proposed SVPWM schemes is illustrated in the paper. The experimental results demonstrate that the proposed schemes achieve a better steady performance with lower switching losses compared with the normal scheme.

• 대한금속재료학회지
• /
• 제49권1호
• /
• pp.46-51
• /
• 2011

Real-time formation of $L1_0$ phase of FePt nanoparticles in the gas phase during ultrasonic-spray pyrolysis is first discussed in the present study. Without any post heat treatment, $L1_0$ phase of FePt nanoparticles appeared at the temperature above $900^{\circ}C$ in the gas phase synthesis. X-ray diffractometry (XRD) and transmission electron microscopy (TEM) studies revealed that FePt nanoparticles less than 10 nm in size contained small volume of $L1_0$ fct phase. However, in other samples obtained at the temperature below $900^{\circ}C$, iron oxide phase co-existed and no evidence of phase transformation was found. Thus, it is anticipated that the time of flight of particles required for crystallization and phase transformation was extended according to the increase of the collision rate. Finally, magnetic properties represented by coercivity and saturation magnetization and functional groups on the particle surface were discussed based on VSM and FT-IR results.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.829-835
• /
• 2006

Rotatory two-phase transverse flux machine(TFM) is a relatively new type of motor with high power density, high torque, and low speed in comparison to conventional electrical motors. However, it has some shortcomings,.i.e. complex construction and high possibility of the magnetically induced vibration due to its inherent structure. This paper investigates the characteristics of the magnetic force and the torque in the rotatory two-phase TFM by using the 3-D finite element method and the spectral analysis. This research shows that the average torque decreases and that the torque ripple increases as the phase delay increases. It also shows that the unbalanced magnetic force is one of the dominant excitation forces in this machine. And it proposes a new topology of rotatory two-phase TFM to eliminate the unbalanced magnetic force.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 추계학술대회
• /
• pp.241-244
• /
• 2006

The present paper describes the scale effect correction method for wind turbine by using CFD(computational fluid dynamics). For the correct ions of wind turbine scale effect, various researches on the helicopter rotor scale effect were Investigated and feasibility study of methods was performed to correct wind turbine scale effect The present paper also introduces new scale effect correction method based on two dimensional lift slope modification. In order to test the Present method, performance analyses of NREL Phase VI wind turbines under various scale conditions were carried out by using CFD. The present method showed reasonable results when applied to NREL Phase VI wind turbine.