• International journal of advanced smart convergence
• /
• 제8권2호
• /
• pp.199-203
• /
• 2019

In this paper, we propose the efficient impulsive noise mitigation scheme for power line communication (PLC) systems in smart grid applications. The proposed scheme estimates the channel impulsive noise information of receiver by applying machine learning. Then, the estimated impulsive noise is updated in data base. In the modulator, the impulsive noise which reduces the PLC performance is effectively mitigated through proposed technique. As an impulsive noise model, Middleton Class A interference model was employed. The performance is evaluated in terms of bit error rate (BER). From the simulation results, it is confirmed that the proposed scheme has better BER performance compared to the conventional model. As a result, the proposed noise mitigation improves the signal quality of PLC systems by effectively removing the channel noise. The results of the paper can be applied to PLC systems for smart grid.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2006년도 전력전자학술대회 논문집
• /
• pp.456-458
• /
• 2006

Power line communication: PLC which easy to install at anywhere near outlet for electric machine. PLC uses transmission line for voltage of which is 60 Hz. Signals don't affect to electric machine in PLC because they are very small voltage. One of the important thing is the processes of adding signal to power line and extracting the signal from power line, the other is to choose the strong modulation method which sends signals long distance without loosing in PLC channel. but PLC channel have very high and variable noise and attenuation and then it is very hard to transmit optimally between the transmitter and the receiver. After all, impedance and noise problems of PLC channel must be overcame. Noises of 2 kinds which are AWGN abd impulse noise and attenuation are orated. To overcome the noise. Recently, Multi-carrier Modulation: MCM methods like as OFDM and DMT which are divide the channel into many sub-channel have been studied. those are powerful communication methods in PLC. In this paper, PLC channels made up of 3 numbers of noise and attenuation are simulated for getting BER by Matlab simulink.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.140-143
• /
• 2000

This research presents new type of remote monitoring and control solution of PLC that can be used bi-directional and efficient management of factory automation through internet. This system has client/server architect for information handling between PLC and remote computer where a user can control and monitor target PLC. Actually the authors redirect RS232C connection between PLC and server computer into Internet connection between PLC and remote client computer using supplied PLC tool program So user feel like in front of PLC panel when he operates remote PLC through Internet. Each client/server program is constructed with Java language for security. In this paper the internet-based remote control system was proposed and proved validity by being applied to redirection of PLC control for factory automation.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(3)
• /
• pp.105-108
• /
• 2001

In this paper, "The PLC Controlling on Web Browser" is designed and implemented to remote control and to monitor FA system. Protocol bidirectional communication with PLC is written and sotted. Then Administration system sets Web server and JAVA Sevelet Program. The client system located at the monitoring Web browser are a JAVA Sevelet base system, and sends some commands to the server system which guards and controls the PLC system. The commands are delivered to the server system and the driver software exists in the server controls the PLC system directly.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 B
• /
• pp.1243-1247
• /
• 1996

In this paper, a small PLC system is designed and developed for the distributed building control and fire control system. It uses 8031, a 8-bit micro controller from Intel Inc. The size of the PLC is $7cm{\times}8cm$ and the PLC can accept 4 sensor inputs and drive 4 relay outputs, which operates at 24V. Multiple access of PLC by one host computer is implemented by assigning a unique 10 to each PLC, which ranges from 0 to 126. The operation starts by sending a command packet from host computer to a PLC and the PLC of the same 10 fetches the command packet by comparing the first byte of the command packet with its own 10. The PLC is programmed to perform a various functions and the function is selected by the content of the command byte, which is the second byte of the command packet. The third byte, which is the last byte, is a checksum byte. The checksum byte is the sum of the first byte and the second byte and is used to detect the communication error. Depending on the content of the command byte, PLC performs the desired function and returns the response packet back to the host computer. The response packet is also a three-byte packet, 10 byte, response byte and checksum byte. For the independent operation of PLC without being controlled by the host computer, variable length RULE data packet is sent to PLC. In case the communication line is broken, the PLC perform the independent operation by referencing the RULE data. The applicable areas are; building automation system, distributed factory automation, measurement of temperature of toxic or dangerous area.

• 전력전자학회논문지
• /
• 제16권2호
• /
• pp.97-104
• /
• 2011

본 논문은 건물 내에서 발생되는 각종 화재 및 재해를 자동으로 신속히 감지한 후 현지에 설치된 방재설비들을 자동으로 동작시켜 화재 및 재해를 초기진압하고, 이들 재해상황들을 유무선 통신망을 통하여 실시간으로 원격지 상황실의 중앙관리시스템에서 모니터링되는 고속 고정밀의 IT 기반의 방재용 자동화시스템을 개발한다. 본 논문에서 제안하는 방재용 자동화시스템은 소형.경량 및 고감도 고정밀의 원칩형 PLC (one-chip type PLC)가 적용되어, 각종 재해 센서로부터 감지된 신호를 분석하고 재해발생시 조기진압을 위한 현장의 방재용 구동장치들을 작동시킨다. 또한 검출된 데이터들은 RS232c 및 블루투스에 의한 유무선 통신망을 통해 원격지 상황실에 데이터 전송 및 긴급 경보신호를 송출시키고, 모니터링 프로그램을 구동시킨다. 제안한 IT 기반의 방재용 자동화시스템은 화재와 각종 재해에 대한 예방과 신속한 조치로 인명과 재산의 손실을 최소화 하고자 한다.

• 한국컴퓨터산업학회논문지
• /
• 제8권4호
• /
• pp.245-252
• /
• 2007

본 논문은 기존 전용선을 이용하는 대신에 PLC(Power Line Communication)를 이용하여 인터넷성능을 평가하고자 한다. 많은 통신망 장비와 작업의 어려운 문제를 단순히 전력선만으로 해결하고자한다. 이와 같이 전력선으로 인터넷을 이용하면 작업의 어려운 문제뿐만 아니라 초기 비용적인 측면에서도 크나큰 이득이 될 수 있다. 따라서 본 논문은 전력선을 이용하여 인터넷 이용이 어느 수준까지 활용할 수 있는가를 평가, 고찰해보고, 향후 전력선으로 인터넷을 활성화할 수 있는가에 대해 타당성을 고찰하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 A
• /
• pp.102-104
• /
• 2005

This paper describes the model of the distribution grid for the broadband power line communication based on lumped-element circuits. In addition, this paper discusses various configurations of the MV distribution network in PLC. The distribution grid is not designed for communication so that it involves unfriendly conditions for PLC. The characterization of the MV distribution grid for PLC should be determined such as noise, attenuation, and mismatched impedance. For theses reasons, the PLC networks is described in using the scattering parameters. Finally, the n-port network is explained.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
• /
• pp.604-608
• /
• 2003

In this paper, we studied the radiated electric field of power-line with DMT signal source in the frequency range of $1.7{\sim}30 MHz$. First, we made the midium voltage power-line communication model for PLC and calculated the current through the power-line using the impedance of the power-line model. Second, we calculated the radiated electric field in power range $-50{\sim}-30 dBm$ using the calculated current. Consequently, the calculated emissive electromagnetic field from the DMT signal is similar to the measured result. So this study is applicable to the standard regulation of electromagnetic interference for PLC.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 D
• /
• pp.2298-2300
• /
• 2002

In this paper, we introduced a fault tolerant control system with the aim of achieving higher degree of reliability for a PLC control system in the field network. The system reliability was evaluated by MTBF(Mean Time Between Failure). The design of the fault tolerant system through CC-Link of Mitsubisi's MELSEC network was presented. In addition, the PLC data is transmitted from the field network's PC to the host PC by TCP/IP Window socket.