• The Journal of the Korea Contents Association
• /
• v.22 no.5
• /
• pp.600-610
• /
• 2022

While Korean piano pedagogy has seen a remarkable growth, the relatively weak attention to intermediate level has emerged as a pending problem. The limited literature review, specifically the lack of playing Korean original works, has been considered as a serious issue. To emphasize the usefulness of Kim Kukjin's "Pieces of Korean Melody for Piano" as an intermediate work, this study presents practical teaching guidelines by classifying of difficulty in his 25 pieces and providing step by step learning goals and teaching plan. The difficulty stage was based on Jane Magret's 10-step classification table for comparison with other intermediate piano literature, and this study more specifically classified Kim's pieces according to Korean melody, rhythm, and texture. As a result of the difficulty classification, it was found that the pieces from stages 4 to 10 was organized to systematically and comprehensively learn step by step from the most basic progression to Korean 'Jangdan' rhythm patterns, various articulations and decorations that express 'Sigimsae' of Korean Traditional Music, and heterophony texture. In addition, this study proposed the order of pieces for the effective teaching according to the characteristics and difficulty of the pieces. This study suggests that the findings lead to the expansion of Korean intermediate literature study and the revitalization of Korean original works teaching method.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.1
• /
• pp.53-61
• /
• 1997

The performance characteristics of magnetic fluid seals are studied numerically as a function of working gap, pole width, angle of pole sharpening, and shaft speed. The temperature distribution of a magnetic fluid seal with multiple tooth is investigated as a function of the contact fraction of magnetic fluids at the periphery of pole tooth using a finite element method. The most significant design parameter of a magnetic fluid seal is the working gap between the pole pieces and the rotating shaft. The result shows that with increasing the working gap, the friction torque decreases radically. The practical working gap for the pole pieces with triangular tooth zone profile is 0.2-0.4mm. The FEM results indicate that the optimal filling of a magnetic fluid between the pole pieces and the shaft is very important due to the accumulations of nonuniform friction heating within the pole pieces, which may interfere the magnetic circuit flow.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.05a
• /
• pp.751-756
• /
• 2001

Permanent-Form is one of system forms for reducing human labor, work costs, oscillation, noise, construction wastes and so on. Permanent-Form is made from precast method in facilities. and carried in construction site to assemble with no demolding. The biggest expense to produce Permanent-Form is about manufacturing mold. To satisfy various size of building member, the same number of manufacturing mold is needed. In this paper, studied about manufacturing mold module for acquiring economic merit and construction member safety. Permanent-Form is member stress and structural analyzed if temporary equipment were used. The result of this study is below. (1) Column sizes of Permanent-Form are 47 kinds of prototype that based on Modular coordination's basic module. 4 pieces or 6 pieces are composed basically. (2) For beam size modular coordination, standard height and width of beam are 150mm and 100mm. It brings 24 kinds of prototype. 4 pieces or 5 pieces are composed basically. (3) Structural analysis value of modular member is like this Column member shows 9.4 to 85kgf/$cm^{2}$ stress distribution and beam member shows 6.3 to 95kgf/$cm^{2}$ stress distribution. Constructing permanent form could have structural safety with use of temporary equipment

• Journal of the Korea Furniture Society
• /
• v.20 no.4
• /
• pp.326-338
• /
• 2009

This study aimed at developing tea furniture with beauty of traditional Korean furniture. As the population which drinks tea increases day by day in the light of LOHAS (Lifestyles of Health and Sustainability) era, the importance of the tea culture has been brought out and the interest of the pieces has increased with the cultural space. But the study is still not only insufficient for Korean tea cultural space, it is but also hard for us to find such pieces as holding the original culture's charm. Thus, after studying concepts and spatial qualities of the tea cultural space based on the traditional culture and after investigating the tea objects including the integral parts, a piece of tea shelf with table which hits the emotion of Korea necessary to tea cultural space was created with solid wood. As a result, if we rediscover and develop the tea pieces with beauty of traditional Korean furniture mentioned as the green furniture, the objects will be standing on tiptoe as contemporary tea pieces conveying the identity of Korea. In addition, they will have a competitiveness across the world pursuing LOHAS beyond well-being.

• Journal of the Society of Naval Architects of Korea
• /
• v.55 no.1
• /
• pp.22-27
• /
• 2018

Ships strengthened for navigation in ice encounter level ice, ice ridge and broken ice fields. Thus, the ship resistance in ice is a very critical concern to the designers of ice-going vessels. The objective of this study is to understand the physical aspects of ship performance in ice and to investigate the characteristics of the ship resistance in broken ice channels. In particular, this study identifies the ship resistance in ice associated with the broken ice channel width and the size of broken ice pieces. Model testings of towed-resistance condition in broken ice channels with three ship speeds were conducted in KRISO ice model basin. The influence of the ship resistance characteristics in broken ice channels for channel width and size of broken ice pieces was analyzed.

• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.860-865
• /
• 2000

This Paper Proposes the test pieces of X, Y and Z axes to compensate the shape distortion of Selective Laser Sintering(SLS) parts resulting from the phase change during the sintering process. In no case of the proposed compensation test pieces of X, Y axes the accurate rates of shrinkage can be measured with the reduction of curling which is obtained from adjustment of build orientation and the formula used to get scale factors are proposed with the shrinkage rates of them. The scale factors of X, Y and Z axes are generated by building up proposed compensation test pieces. The generated scale iactors are required to satisfy the dimensional accuracy even if there are changes of the build position and the size of SLS parts in the build chamber. For this reason, it is proposed that the build positions and the size be considered to be noise factors against the compensation test pieces and a method is also proposed that scale factors be selected to robustly maintain the dimensional accuracy of SLS parts under the actual operating conditions with the application of the Taguchi Method.

• Journal of the Korean Home Economics Association
• /
• v.48 no.2
• /
• pp.85-94
• /
• 2010

Comparative analysis of marker efficiency in blouse patterns, based on different sleeve designs, was carried out. Sleeve designs used included set-in-sleeve, laglan sleeve, and epaulet sleeve. The two types of epaulet sleeves, A and B, are based on pattern arrangement methods of center back. Cloth and production conditions are the width of cloth, the number of marking pieces, and the direction for marking deployment. A blouse pattern saved to the PAD CAD System was graded with different sizes and arranged for industrial purpose to calculate the marker efficiency in different conditions. The results were as follows. On the whole, the marker efficiency of small pattern sized set-insleeve was higher than laglan and epaulet sleeve designs. It was also established that marker efficiency is dependent on cloth and production conditions. For small number of marking pieces, efficiency was higher in the condition of 110cm cloth widths compared with that condition of 150cm cloth widths. However the efficiency of large number of marking pieces was higher in the condition of 150cm cloth widths.

• Journal of Magnetics
• /
• v.20 no.2
• /
• pp.186-192
• /
• 2015

This paper describes the electromagnetic and mechanical characteristics of coaxial magnetic gear (CMG) with a low gear ratio. The analysis models are restricted to a CMG with a gear ratio of less than 2. The electromagnetic characteristics including transmitted torque and iron losses are presented according to the variation of the gear ratio. The pole pairs of high speed rotor are chosen as 6, 8 and 10 by considering the torque capability. As the gear ratio approaches 1, both iron losses on the ferromagnetic materials and eddy current losses on the rotor permanent magnets are increased. The radial and tangential forces on the modulating pieces are calculated using the Maxwell stress tensor. When the maximum force is exerted on the modulating pieces, the mechanical characteristics including stress and deformation are derived by structural analysis. In CMG models with a low gear ratio, the maximum radial force acting on modulating pieces is larger than that in CMG models with a high gear ratio, and the normal stress and normal deformation are increased in a CMG with a low gear ratio. Therefore, modulating pieces should be designed to withstand larger radial forces in CMG with a low gear ratio compared to CMG with a high gear ratio.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.3
• /
• pp.1275-1284
• /
• 2018

The coaxial magnetic gear with the flux concentrating structure is known that it has the torque performance advantage over the coaxial magnetic gear having surface mounted permanent magnet, thanks to the flux focusing effect. But, if the solid cores are used in the modulating pieces and rotor cores to consider the mechanical reliability and cost reduction, the operating torque of the flux concentrating coaxial magnetic gear can be significantly diminished because the iron losses at the solid cores affect the actual transmitted torque. Furthermore, the modulating pieces and rotor cores have different characteristics of the iron losses from one another, because the space harmonic components of the magnetic flux density, which cause the iron losses, are different. Thus, in this paper, we focused on the analysis of the characteristics of the space harmonic components of the magnetic flux density and resultant eddy current losses in the surface mounted PM and flux concentrating coaxial magnetic gears, when these coaxial magnetic gears have the solid cores at the modulating pieces and rotor cores. The characteristics of pull-out torque (static torque), operating torque (dynamic torque), and efficiency are also researched, and compared by the 3D finite element analysis (FEA) and experiment.

• Journal of Fashion Business
• /
• v.27 no.6
• /
• pp.99-109
• /
• 2023

Loewe Craft Prize is currently the most influential craft contest. During the contest, contemporary craftworks, as art with excellent aesthetic value, are selected as finalists but there are no enough studies on them as subjects. This study aimed to investigate contemporary textile pieces found in the fashion brand Loewe's Craft Prize, a Loewe Foundation Craft Prize and elucidate their expressive characteristics. The methodology of the study was a qualitative study that derives the expressive characteristics of the works within the scope of the study through case analysis along with theoretical reviews. The selection of research subjects was based on 22 works of textile pieces among the works selected as finalists for the last six years since the first year of the prize in 2016. The analysis of textile pieces showed first, the emphasis on traditional expression, second, the development of new expressive techniques for the material, and third, the pictorial character revealed in flat pieces. The expressive characteristics of contemporary textile art shown in the Loewe Foundation Craft Prize, derived based on such results were, first, the confirmation of the unique capabilities of craft through the inheritance of tradition, second, the rediscovery of textile properties through material experimentation, and third, the possibility of expanding the field of textile due to the pictorial character.