• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.191-191
• /
• 2006

The structures of the mesophases and their subunits of PS-b-P4VP in a toluene solution were studied by using SAXS, TEM and GIFT methods. The hierarchical structures of PS-b-P4VP, such as the individual micelle, the face-centered cubic (fcc) and body-centered cubic (bcc) structures and the lamellar structure, were identified for the first time. The diameter of the micelle core was ${\sim}80\;%$ of the most extended chain length of the core chain, suggesting that the core chains were quite stretched. The stretched chain in the core caused the core of the micelle to be not homogenous with a higher density at the center than at the outer part. As the concentration level increases, the fcc and both fcc and bcc appear for the packing of the micelles of PS(3.3k)-b-P4VP(4.7K) and PS(12K)-b-P4VP(11.8K), respectively. The lamellar structure was also identified, with a further increase in the concentration for PS(3.3k)-b-P4VP(4.7K). These hierarchical structures were also identified via TEM images.

• Journal of the Korean Society of Radiology
• /
• v.15 no.2
• /
• pp.139-145
• /
• 2021

This study is to confirm the range of tube voltage for Chest X-ray in DR system by comparing with dose area product (DAP) and effective dose in efficient detector exposure index (DEI) range. GE definium 8000 was used to for the phantom study. The range of tube voltage is 60~130 kVp and of mAs is 2.5~40 mAs. The acquired images were classified into efficient DEI groups, then calculated effective dose with DAP by using a PC-Based Monte Carlo Program 2.0. The signal to noise ratio (SNR) was measured at 4 regions, including the thoracic spine, the lung area with the ribs, the lung area without the ribs, and the liver by using Picture Archiving and Communication System. The significance of the group for each tube voltage was verified by performing the kruskal-wallis test and the mann-whitney test as a post-test. When set to 4 groups dependned on the tube voltage, DAP showed significant differences; 60 kVp and 80 kVp, and 60 kVp and 90 kVp (p= 0.034, 0.021). Effective dose exhibited no statistically significant differences from the all of the group (p>0.05). SNR exhibited statistically significant differences from the all of the group in the liver except compared to 80 kVp and 90 kVp (p<0.05). Therefore, high tube voltages of 100 kVp or more need to be reconsidered in terms of patient dose and imaging in order to represent an appropriate chest X-ray image in a digital system.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.14 no.2
• /
• pp.148-154
• /
• 2011

Purpose: We aimed to study the distribution of rotavirus genotypes (VP7 and VP4) and disease severity of rotavirus gastroenteritis prevalent in our community. Methods: Stool samples were collected from 156 children who were hospitalized with rotavirus gastroenteritis from December 2007 to June 2008. The disease severity of all patients was scored using the Vesikari scale. After extraction of ds-RNA of the rotavirus, cDNA synthesis using reverse transcription and polymerase chain reaction (RT-PCR) and multiplex PCR was performed. Following this, the final identification of genotypes was performed. Results: Of the 156 samples, VP7(G) and VP4(P) genotypes were identified in 147 (94.2%) and 140 (89.7%) samples, respectively. G1 (116 of 147 samples; 78.9%) and P[8] (137 of 140 samples; 97.9%) were the most prevalent, respectively. Of the 138 samples identified of combination types of VP7 and VP4, G1P[8] (111 samples; 80.4%) was the most prevalent. Other combination types varied with very low distribution rates. 9.4% of genotypes were not included in the new vaccines. The disease severity score was $11.8{\pm}3.3$ ($mean{\pm}2SD$). The distribution of disease severity was mild or moderate in 37.8% and severe in 62.2% of patients. Conclusion: The most prevalent genotype combination of rotavirus was G1P[8] and genotypes not included in the vaccines represented 9.4% in our community. Disease severity distribution of hospitalized children with rotavirus gastroenteritis was higher in the severe than in the mild and moderate categories.

• Korean Journal of Veterinary Research
• /
• v.48 no.4
• /
• pp.423-429
• /
• 2008

Throughout the world, rotavirus infections cause extensive morbidity in human infants and diarrhea in animals such as white scour caused by bovine rotavirus in calves. We isolated three rotavirus strains designated KV0407, KV0418, and KV0426 from 103 fecal samples of diarrheic calves. The genes coding for proteins VP4, VP6, VP7, and NSP4 from strain KV0407 were sequenced and compared with the nucleotide sequences of other known strains of rotavirus. The KV0407 VP4 gene was highly homologous to the OSU (99.4%) and JL94 (99.4%), but not the B223 (62.4%) and K33 (62.4%) VP4 genes. The KV0407 and KV0418 VP7 genes were most similar to the OSU and super-short type VMRI VP7 genes. Based on nucleotide sequence analysis, the KV0407 strain was tentatively assigned to A serogroup (SG I), G5P[7], NSP4 genotype B and the KV0418 and KV0426 strains were assigned to A serogroup (SG I), G6P[5], NSP4 genotype A. The genetic characterization of these bovine rotavirus isolates could be useful for the diagnosis and prevention of diarrhea in calves.

• Polymer(Korea)
• /
• v.25 no.5
• /
• pp.649-656
• /
• 2001

Miscibility of poly(4-vinylpyridine) (P4VP) blends with poly(vinyl acetate-co-vinyl alcohol) (VAc-VAL copolymers) was investigated as a function of comonomer composition of VAc-VAL copolymers. Differential scanning calorimetry (DSC) and thermo-optical microscopic (TOM) analysis confirmed that P4VP is miscible with VAc-VAL copolymers containing more than 30 mole% VAL. Fourier transform inflated (FT-IR) spectroscopic analysis revealed that the strong intermolecular hydrongen bonding interaction between the vinylpyridine and VAL hydroxyl group was formed. Theoretical phase diagram was constructed by the calculation using the Association model, a thermodynamic model for hydrogen-bonded polymer blend systems developed by Coleman et al. The calculated theoretical binodal phase diagrams were in good agreement with the experimentally determined cloud point curves.

• Journal of the Korea Safety Management & Science
• /
• v.17 no.4
• /
• pp.213-221
• /
• 2015

The aim of this study was to set up the optimal exposure condition according to detector type considering image quality (IQ) with radiation dose in chest digital radiography. We used three detector type such as flat-panel detector (FP) and computed radiography (CR), and charge-coupled device (CCD). Entrance surface dose (ESD) was measured at each exposure condition combined tube voltage with tube current using dosimeter, after attaching on human phantom, it was repeated 3 times. Phantom images were evaluated independently by three chest radiologists after blinding image informations. Standard exposure condition using each institution was 117 kVp-AEC at FP and 117 kVp-8 mAs at CR, and 117 kVp-8 mAs at CCD. Statistical analysis was performed by One way ANOVA (Dunnett T3 test) using SPSS ver. 19.0. In FP, IQ scores were not significant difference between 102 kVp-4 mAs and 117 kVp-AEC (28.4 vs. 31.1, p=1.000), even though ESD was decreased up to 50% ($62.3{\mu}Gy$ vs. $125.1{\mu}Gy$). In CR, ESD was greatly decreased from 117 kVp-8 mAs to 90 kVp-8 mAs without significant difference of IQ score (p=1.000, 24.6 vs. 19.5). In CCD, IQ score of 117 kVp-8 mAs was similar with 109 kVp-8 mAs (29.6 vs. 29.0), with decreasing from $320.8{\mu}Gy$ to $284.7{\mu}Gy$ (about 11%). We conclude that optimal x-ray exposure condition for chest digital radiography is 102 kVp-4 mAs in FP and 90 kVp-8 mAs in CR, and 109 kVp-8 mAs in CCD.

• Korean Chemical Engineering Research
• /
• v.55 no.2
• /
• pp.214-219
• /
• 2017

In this work, we fabricated PS-b-P4VP block copolymer membranes from self-assembly and non-solvent induced phase separation (SNIPS), which combines the block copolymer self-assembly and conventional NIPS process. While previous studies mostly focused on the fabrication of well-defined structures, we systematically examined various processing parameters such as polymer concentration, solvent evaporation duration, solvent composition, and humidity, to optimized the membrane structures. As a result, the morphology of PS-b-P4VP membranes was optimized at a certain polymer concentration in solution and composition of volatile solvent at low humidity conditions, resulting in SNIPS separation membranes with well-defined nanopores on the surface, 75% of membrane porosity, and 18% of surface porosity.

• Korean Journal of Veterinary Service
• /
• v.35 no.2
• /
• pp.83-90
• /
• 2012

Porcine rotaviruses are the most common causes of viral gastroenteritis in piglets around the world. The major G genotypes of porcine rotaviruses causing diarrhea were G4, G5 and G11 genotypes. Recently, G9 genotype rotaviruses were problemed at swine farms and frequently recognized from diarrheic piglets. In this study, a porcine rotavirus (PoRV-1) was isolated from piglet showing diarrhea using MA104 cells and confirmed as rotavirus by electron microscopy, genomic RNA electropherotyping and indirect immunofluorescence antibody tests. The nucleotide sequence of the VP7 gene of PoRV-1 was determined and compared with those of other genotype rotavirus strains from other parts of the world. Also, the nucleotide sequences of VP4, VP6 and NSP4 genes of PoRV-1 were determined and compared with those of other rotavirus strains from other countries. The results showed that the PoRV-1 isolate belonged to the G9 genotype and the P, I and E genotypes of PoRV-1 were P[23], I5 and E1, respectively. The Korean G9 PoRV-1 isolate and its nucleotide sequence data would be usefully used for the development of porcine rotavirus vaccines in near future.

• Imaging Science in Dentistry
• /
• v.53 no.3
• /
• pp.217-220
• /
• 2023

Purpose: This pilot study was conducted to evaluate half-value layer (HVL) measurements obtained using a semiconductor dosimeter for intraoral radiography. Materials and Methods: This study included 8 aluminum plates, 4 of which were low-purity (less than 99.9%) and 4 high-purity (greater than 99.9%). Intraoral radiography was performed using an intraoral X-ray unit in accordance with the dental protocol at the authors' affiliated hospital: tube voltage, 60 kVp and 70 kVp; tube current, 7 mA; and exposure time, 0.10 s. The accuracy of HVL measurements for intraoral radiography was assessed using a semiconductor dosimeter. A simple regression analysis was performed to compare the aluminum plate thickness and HVL in relation to the tube voltage (60 kVp and 70 kVp) and aluminum purity (low and high). Results: For the low-purity aluminum plates, the HVL at 60 kVp (Y) and 70 kVp (Y) was significantly correlated with the thickness of the aluminum plate (X), with Y=1.708+0.415X (r=0.999, P<0.05) and Y=1.980+0.484X (r=0.999, P<0.05), respectively. Similarly, for the high-purity aluminum plates, the HVL at 60 kVp (Y) and 70 kVp (Y) was significantly correlated with the plate thickness(X), with Y=1.696+0.454X (r=0.999, P<0.05) and Y=1.968+0.515X (r=0.998, P<0.05), respectively. Conclusion: This pilot study examined the relationship between aluminum plate thickness and HVL measurements using a semiconductor dosimeter for intraoral radiography. Semiconductor dosimeters may prove useful in HVL measurement for purposes such as quality assurance in dental X-ray imaging.

• Journal of the Korean Vacuum Society
• /
• v.19 no.2
• /
• pp.81-90
• /
• 2010

We introduce a novel and versatile approach for preparing self-assembled nanoporous multilayered films with antireflective properties. Protonated polystyrene-block-poly (4-vinylpyrine) (PS-b-P4VP) and anionic polystyrene-block-poly (acrylic acid) (PS-b-PAA) block copolymer micelles (BCM) were used as building blocks for the layer-by-layer assembly of BCM multilayer films. BCM film growth is governed by electrostatic and hydrogen-bonding interactions between the oppositely BCMs. Both film porosity and film thickness are dependent upon the charge density of the micelles, with the porosity of the film controlled by the solution pH and the molecular weight (Mw) of the constituents. PS7K-b-P4VP28K/PS2K-b-PAA8K films prepared at pH 4 (for PS7K-b-P4VP28K) and pH 6 (for PS2K-b-PAA8K) are highly nanoporous and antireflective. In contrast, PS7K-b-P4VP28K/PS2K-b-PAA8K films assembled at pH 4/4 show a relatively dense surface morphology due to the decreased charge density of PS2K-b-PAA8K. Films formed from BCMs with increased PS block and decreased hydrophilic block (P4VP or PAA) size (e.g., PS36K-b-P4VP12K/PS16K-b-PAA4K at pH 4/4) were also nanoporous. Furthermore, we demonstrate that the nanostructured electrochemical sensors based on patterning methods show the electrochemical activities. Anionic poly(styrene sulfonate) (PSS) layers were selectively and uniformly deposited onto the catalase (CAT)-coated surface using the micro-contact printing method. The pH-induced charge reversal of catalase can provide the selective deposition of consecutive PE multilayers onto patterned PSS layers by causing the electrostatic repulsion between next PE layer and catalase. Based on this patterning method, the hybrid patterned multilayers composed of platinum nanoparticles (PtNP) and catalase were prepared and then their electrochemical properties were investigated from sensing $H_2O_2$ and NO gas. This study was based on the papers reported by our group. (J. Am. Chem. Soc. 128, 9935 (2006); Adv. Mater. 19, 4364 (2007); Electro. Mater. Lett. 3, 163 (2007)).