• Journal of Korean Society of Water and Wastewater
• /
• v.11 no.1
• /
• pp.21-32
• /
• 1997

Optimum design of water distribution network(WDN) in many times means just reducing redundancy. Given only a few situations are taken into consideration for such design, WDN deprived of inherited redundancy may not work properly in some unconsidered cases. Quantifying redundancy and incorporating it into the optimal design process will be a way of overcoming just reduction of redundancy. Expected shortage is developed as a reliability surrogate in WDN. It is an indicator of the frequency, duration and severity of failure. Using this surrogate, Expected Shortage Optimization Model (ESOM) is developed. ESOM is tested with an example network and results are analyzed and compared with those from other reliability models. The analysis results indicate that expected shortage is a quantitative surrogate measure, especially, good in comparing different designs and obtaining tradeoff between cost and. reliability. In addition, compared other models, ESOM is also proved useful in optimizing WDN with reliability and powerful in controlling reliability directly in the optimization process, even if computational burden is high. Future studies are suggested which focus on how to increase applicability and flexibility of ESOM.

• Korean Journal of Adult Nursing
• /
• v.22 no.3
• /
• pp.342-351
• /
• 2010

Purpose: The purpose of this study was to determine an increase in the number of younger and middle-aged people who have a stroke and the differences in their recovery experience compared with older people. Methods: The research question for this study was "What is the recovery experience of young adults and middle-aged people who suffer a stroke?". In order to answer the question, the grounded theory method was utilized. The data was collected through individual in-depth interviews of six participants, their age ranged from 36 to 45 years old. Results: After comparative analysis, the core category was "standing up for oneself with limit". The experience process were categorized into four stages: 'Facing Reality stage', 'Motivation stage', 'Desire Recovery stage', 'Self-Overcoming stage'. Conclusion: Most of the research for the recovery process was prognostic in nature and the results. This study was demonstrated certain indicators which can be useful in further research.

• The Journal of Korean Academic Society of Nursing Education
• /
• v.26 no.2
• /
• pp.111-122
• /
• 2020

Purpose: In the Fourth Industrial Revolution, nursing education will change in a different way than before. The purpose of this study was to analyze characteristics of qualitative research on learning experiences for nursing students, and to suggest directions for nursing education geared to the needs of the future. Methods: An integrative review method was used. Based on Whittemore & Knafl's approach, five steps were applied. Results: Eleven papers met the selection criteria and had above average ratings in quality appraisals. Three characteristics related to the learning experiences of nursing students were derived: (1) overcoming difficulties in the learning process and concentrating on problem-solving, (2) improving self-efficacy through experiencing achievement in the learning process, (3) establishing nursing professionalism, (4) identifying the importance of self-directed and self-reflected learning, and (5) developing teamwork. Conclusion: This review found that various learning experiences were conducted for practical experience and learner-oriented learning. Nursing students overcame difficulties to achieve their learning outcomes, and developed their professionalism. Further study is required to comprehensively explore research including other countries, and the experiences of instructors.

• Journal of the Korea Institute of Building Construction
• /
• v.12 no.6
• /
• pp.636-647
• /
• 2012

Construction projects have become so large, complicated and incredibly high-tech that process management is currently considered one of the most important issues. Unlike typical manufacturing industries, most major construction activities are performed in the open air and thus are exposed to various environmental factors. Many studies have been conducted with the goal of establishing efficient techniques and tools for overcoming these limitations. Productivity analysis and prediction, one of the related research subjects, must be considered when evaluating approaches to reducing construction duration and costs. The aim of this research is to present a quantified impact analysis of construction delay factors on construction productivity of a steel staircase system, which has been widely applied to high rise building construction. It is also expected to improve the process by managing the factors, ultimately achieving an improvement in construction productivity. To achieve the research objectives, this paper analyzed different delay factors affecting construction duration by means of multiple regression analysis focusing on steel staircase systems, which have critical effects on the preceding and subsequent processes in structure construction. Statistical analysis on the multiple linear regression model indicated that the environment, labor and material delay factors were statistically significant, with 0.293, 0.491, and 0.203 as the respective quantified impacts on productivity.

• Transactions of Materials Processing
• /
• v.12 no.8
• /
• pp.710-717
• /
• 2003

The implicit, finite element analysis program for analyzing the springback in the warm forming process of aluminum alloy sheets was developed. For the description of planar anisotropy in warm forming temperatures, Barlat's yield function is employed, and the power law type constitutive equation is used in terms of working temperatures for the depiction of work hardening in high temperatures. Also, Jetture's 4-node shell elements are introduced for reflecting the mechanical behavior of aluminum alloy sheet and the non-steady heat balance equations are solved for considering heat gain and loss during the forming process. For the springback evaluation, Newton-Raphson iteration method is introduced for overcoming the geometric nonlinearlity problem. In order to verify the validity of the FEM program developed, the stretching bending and springback processes are simulated. Though springback analysis results are slightly bigger than experimental ones, they have the same trend of the decreasing springback as the forming temperature increases.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.1
• /
• pp.24-29
• /
• 2017

There is a need for explosion experiments for explosion-related research. However, there are many restrictions in performing an actual experiment. Therefore, in this paper, an alternative method of overcoming the constraints of an explosion experiment has been conducted using a passenger behavior analysis program called MADYMO to assess and analyze the human body injury due to explosion load. To increase the reliability of the analysis, a drop test has been conducted with the analysis. We provide a new framework for performing the analysis. In future, we will further develop our research with the goal of reducing the opportunity cost for the study of the human body injury.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.08a
• /
• pp.13-20
• /
• 2003

The implicit, finite element analysis program for analyzing the springback in the warm forming process of aluminum alloy sheets was developed. For the description of planar anisotropy in warm forming temperatures, Barlat's yield function is employed, and the power law type constitutive equation is used in terms of working temperatures fur the depiction of work hardening in high temperatures. Also, Jetture's 4-node shell elements are introduced for reflecting the mechanical behavior of aluminum alloy sheet and the non-steady heat balance equations are solved for considering heat gain and loss during the forming process. For the springback evaluation, Newton-Raphson iteration method is introduced for overcoming the geometric nonlinearlity problem. In order to verify the validity of the FEM program developed, the stretching bending and springback processes are simulated. Though springback analysis results are slightly bigger than experimental ones, they have the same trend of the decreasing springback as the forming temperature increases.

• Archives of design research
• /
• v.14 no.3
• /
• pp.155-164
• /
• 2001

Under the ambiguous situation that Id character design aim is not defined, this study would help designers with 1. overcoming the limitation of character form generation ability by establishing visual application system, 2. accepting users'opinions by generating character images dynamically, analysing and giving information on the preferred ones on the web on real time, 3. identifying tendency of preference so that they can generate preferred colors and images in future by updating image combination and dropping low-preferred ones. this system would play a role as an idea or character form generation application in the 3d character design development process

• Journal of the Semiconductor & Display Technology
• /
• v.10 no.4
• /
• pp.101-106
• /
• 2011

There are various methods in the flat panel display manufacture. The cost reduction effect is very big in case of using the screen printing method. The screen printing method is much used in the process of forming PDP barrier and can apply to the process of arranging the pillars for maintaining the vacuum gap of the vacuum glazing panel. The pillar which is one of the core elements for comprising vacuum glazing maintains the vacuum gap overcoming the vacuum pressure difference with the atmospheric pressure generated in vacuum glazing. At the same time, the deformation phenomenon by vacuum pressure is relived. In this paper, by using FEM about three considered in the pillar design and arrangement kinds of limiting factors, the simulation was performed. The pillar optimum arrangement method at within the maximum allowable tensile stress and heat transfer coefficients according to the arrangement try to be presented based upon the analyzed result data review and this validity tries to be verified by FEM.

• Journal of Korean Academy of Psychiatric and Mental Health Nursing
• /
• v.27 no.4
• /
• pp.394-405
• /
• 2018

Purpose: The purpose of this study was to identify and describe cultural meanings for married Japanese immigrant women in rural Korean communities. Methods: The informants were 10 women in rural areas. Data were collected from August 2017 to June 2018 through in-depth interviews and participant observations and analyzed using text analysis and taxonomic methods developed by Spradley. Results: The meanings of adaptation were classified into five cultural domains: Practicing the doctrine, accepting the difference, redemption, true home, and confronting reality. The subthemes according to meanings of adaptation were comprised of international marriage with a sense of calling, bearing with sense of duty, and making a living substantively. The subthemes in this study reflect the process of adaptation. The cultural themes in the process of adaptation were overcoming differences and conflicts between Korea and Japan to achieve true family. Conclusion: The adaptation processes of married Japanese immigrant women included making their living reality known and recognizing the times when exchanges between Koreans and Japanese cannot exist within a hostile composition.