Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)

The Korean Society of Manufacturing Process Engineers (한국기계가공학회)
권호 표지
DOI QR코드

DOI QR Code

Injury Assessment and Analysis under Blast Load Using MADYMO

MADYMO를 이용한 폭발 하중에 따른 인체 상해평가 및 분석

  • Choi, Ho-Min (School of Mechanical and Aerospace Engineering, ERI, Gyeongsang National University) ;
  • Kim, Jae-Ki (School of Mechanical and Aerospace Engineering, ERI, Gyeongsang National University) ;
  • Pack, In-Seok (School of Mechanical and Aerospace Engineering, ERI, Gyeongsang National University) ;
  • Lee, In-Young (School of Mechanical and Aerospace Engineering, ERI, Gyeongsang National University) ;
  • Kwon, Dae-Ryeong (School of Mechanical and Aerospace Engineering, ERI, Gyeongsang National University) ;
  • Lee, Seok-Soon (School of Mechanical and Aerospace Engineering, ERI, Gyeongsang National University)
  • 최호민 (경상대학교 대학원 기계항공공학부) ;
  • 김재기 (경상대학교 대학원 기계항공공학부) ;
  • 백인석 (경상대학교 대학원 기계항공공학부) ;
  • 이인영 (경상대학교 대학원 기계항공공학부) ;
  • 권대령 (경상대학교 대학원 기계항공공학부) ;
  • 이석순 (경상대학교 대학원 기계항공공학부)
  • Received : 2016.07.27
  • Accepted : 2016.09.25
  • Published : 2017.02.28
Download PDF
⟨ Previous Next ⟩

Abstract

There is a need for explosion experiments for explosion-related research. However, there are many restrictions in performing an actual experiment. Therefore, in this paper, an alternative method of overcoming the constraints of an explosion experiment has been conducted using a passenger behavior analysis program called MADYMO to assess and analyze the human body injury due to explosion load. To increase the reliability of the analysis, a drop test has been conducted with the analysis. We provide a new framework for performing the analysis. In future, we will further develop our research with the goal of reducing the opportunity cost for the study of the human body injury.

Keywords

References

  1. Kim, K. C., "Numerical investigation of the blast effect on structures," A Master's Thesis, KAIST, Republic of Korea, 2012.
  2. Han, M. S. and Cho, J. U., "A Study on the Analysis of Thermal Durability due to the Configuration of Mortar," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 6, pp. 69-76, 2015. https://doi.org/10.14775/ksmpe.2015.14.6.069
  3. Jung, S. C., Park, T. S., Hur, N. S. and Kim, I. W., "CAE/CFD Analysis and Design of High-Pressure Drop Control Valve for Offshore Project," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 5, pp. 42-49, 2015. https://doi.org/10.14775/ksmpe.2015.14.5.042
  4. Han, M. S. and Cho, J. U., "A Study on Durability of Under Bar at Car through Structural and Fatigue Analysis," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 2, pp. 38-44, 2015. https://doi.org/10.14775/ksmpe.2015.14.2.038
  5. Kim, Y. J., "FE Analysis of Forging Process for Improving Tool Life in Hot Forging of CV Joint Outer Race," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 13, No. 3, pp. 56-62, 2014. https://doi.org/10.14775/ksmpe.2014.13.3.056

Cited by

  1. A Study on Safety of Rear Seat Occupant according to Seat Belt Specifications vol.26, pp.5, 2018, https://doi.org/10.7467/KSAE.2018.26.5.630