• Structural Engineering and Mechanics
• /
• v.54 no.5
• /
• pp.955-971
• /
• 2015

In this paper, the influence of the polled direction of piezoelectric materials on the stress distribution is studied under time-harmonic dynamical load (time-harmonic Lamb's problem). The system considered in this study consists of piezoelectric covering layer and piezoelectric half-plane, and the harmonic dynamical load acts on the free face of the covering layer. The investigations are carried out by utilizing the exact equations of motion and relations of the linear theory of electro-elasticity. The plane-strain state is considered. It is assumed that the perfect contact conditions between the covering layer and half-plane are satisfied. The boundary value problems under consideration are solved by employing Fourier exponential transformation techniques with respect to coordinates directed along the interface line. Numerical results on the influence of the polled direction of the piezoelectric materials such as PZT-5A, PZT-5H, PZT-4 and PZT-7A on the normal stresses, shear stresses and electric potential acting on the interface plane are presented and discussed. As a result of the analyses, it is established that the polled directions of the piezoelectric materials play an important role on the values of the studied stresses and electric potential.

• Journal of the Society of Naval Architects of Korea
• /
• v.51 no.1
• /
• pp.67-77
• /
• 2014

In this study, Explicit Algebraic Reynolds Stress Model (EARSM) which is based on the existing ${\kappa}-{\omega}$ model has been applied to the flow field analysis around ship hulls. Existing transport equations for the turbulent kinetic energy and the dissipation rate are used in almost the same form and anisotropy terms of Reynolds stresses are newly considered. The well-known KVLCC2 and KCS hull forms are selected as validation cases, which were also used in 2010 Workshop on CFD in Ship Hydrodynamics. In case of KVLCC2 double model, comparison of mean velocity distribution, turbulent kinetic energy, and Reynolds stresses near the propeller plane has been carried out and wave elevation and wave profiles have been additionally studied for KCS and KVLCC2 with free surface models. Some improved results for mean velocity distribution at the propeller plane have been obtained while there is little change in free surface wave profiles.

• Health Policy and Management
• /
• v.2 no.2
• /
• pp.33-56
• /
• 1992

The objectives of this research are (i) to review the functional and financial distribution of public health adminstration between central and local governments, (ii) to find out, based on economic criteria, optimal distribution required to fullfil local need for public health, and finally, (iii) to suggest policy implications in health area in face of the newly arising local autonomy system in Korea. Judging from data on government expenditures and tax revenues, public health administration in Korea is highly concentrated into central government, both functionlally and financially. High dependency of public health on central government has often been critisized that local residents can not participate in the decision making process for local health problems. This study, however, shows that localization of public health administration does not necessarily result in efficient and equitable allocation of resource to satisfy local demand for public health. From this point of view, two eccnomic criteria are suggested, i.e. external effect and economies of scle, as distributive criteria of roles in public health administration between local and central government. In addition, superiority of central concentration of public health administration to localization is emphasized in that public health in a wide sense contains the nature of public good and is part of compulsory socil security system. As a consequence, planned intervention by government is desirable.

• Imaging Science in Dentistry
• /
• v.51 no.3
• /
• pp.291-297
• /
• 2021

Purpose: This study was performed to evaluate the prevalence, distribution, and radiological features (as per the Shear classification) of dentigerous cysts in a Lebanese sample. Materials and Methods: It was an epidemiological, cross-sectional, 5-year retrospective study of 137 dentigerous cysts treated at Lebanese Army Dental Departments. The collected data comprised demographic and radiological information corresponding to patients from July 2015 to July 2020. Syndromic cases were excluded. Demographic data and the radiological features of cases were studied and analyzed. Results: Dentigerous cysts were treated in 109 patients (58.7% males and 41.3% females; mean age: 28.3±16.3 years) out of 6,013 patients(52% males and 48% females), with a prevalence of 1.8%. Dentigerous cysts were more commonly found in patients in their second and third decades of life than in older age groups. Of the 109 patients, 22.9% had multiple dentigerous cysts. Of the 137 cysts, 71.5% were mandibular. The most prevalent anatomical location was the posterior mandible, followed by the posterior maxilla. The most commonly involved tooth was the mandibular third molar. Regarding radiological types, the central type was the most common (60.6%), followed by the lateral type (29.2%), and the circumferential type (10.2%). Conclusion: The results of this study were similar to studies of other populations in terms of distribution and features. Multiple non-syndromic dentigerous cysts were more common than reported in other studies, which warrants further clinical studies to reveal previously undetected factors.

• Fisheries and Aquatic Sciences
• /
• v.26 no.12
• /
• pp.689-697
• /
• 2023

This study used a multi-frequency acoustic method to assess the density and spatial distribution of dominant zooplankton, euphausiids and copepods, which are representative species of the zooplankton immigrating the sea around Republic of Korea. Acoustic surveys were carried out in the East Sea and South Sea from June 16 to 29, 2017, using the research vessel Tamgu 20th from the National Institute of Fisheries Science. From the results of the acoustic survey, the distribution of euphausiids was relatively higher in the East Sea than in the South Sea. Additionally, although the distribution of copepods was low in all areas, they were abundant in certain areas in the East Sea and the southern area of the Jeju Sea. Euphausiid and copepod density was estimated to be 1.2 g/m² (CV = 19.1%) and 2.8 g/m² (CV = 23.5%), respectively.

• The Korea Journal of Herbology
• /
• v.39 no.4
• /
• pp.11-17
• /
• 2024

Objective : The purpose of this dissertation is to make a list of the Rhodophyta growing naturally in the Korean coastal waters, and to carry out a survey on the current distribution status to investigate the Bangiaceae which can be used as medicinal herbs. Methods : References and research papers about herbology published at home and abroad were examined. Results : A list was made about Bangiaceae plant which were cultivated or grew naturally in Korea, after investigated the data on domestic and foreign Bangiaceae plants. Out of those lists, serviceable plants were selected , their distributions were analysed. 1. A total of 2 genera and 18 species of Bangiaceae were found in the Korean coastal waters among which 1 genera and 4 species(approximately 22%) were medicinal plants. 2. Out of the 18 species of Bangiaceae 16 species belonged to Porphyra, and out of the 4 species of medicinal plants 4 species belonged to Porphyra. 3. Among the medicinal parts 4 species belonged to algae species had cold property, and had salty and sweet flavors. 4. 4 species had the efficacy of Lung, Spleen and bladder meridian had the potency of soften hardness, which helps to remove hard clots generated, cure phlegm in human body. 5. No toxic drugs were detected. Conclusion : There were totaled to 18 genera and 2 species in Bangiaceae in Korea and among them medicinal plants are 1 genera, 4 species, some 22% in total.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.44 no.4
• /
• pp.304-311
• /
• 2008

Patagonian toothfish(Dissostichus eleginoides) was investigated in the southeastern Atlantic Ocean during the period of 19 March to 7 July 2007 by commercial bottom longliners. The number of 116 hauls were carried out individually in this study area by two bottom longliners during 111 days. The total catches were 89,559kg(9.91kg/100hooks) and 66,758kg(7.38kg/100hooks), respectively. Most Patagonian toothfishes were caught on the $46-48^{\circ}S$, $6-11^{\circ}E$ of southeastern Atlantic Ocean. Patagonian toothfish comprised 67.01-92.49%(by weight) of the catches in the southeastern Atlantic Ocean. No Antarctic toothfish (Dissostichus mawsoni) was caught during the surveys. Patagonian toothfish was found throughout the experimental area, but the density was considerably greater in the layer of 1,300-1,900m, where 49.88% of the fishes were caught. Smaller fishes were generally distributed to the shallow waters and larger fish were more frequently caught with the depth. Mean size of Patagonian toothfish increased with depth of capture. Accordingly economically profitable fishing activities for the Patagonian toothfish fishery requires an understanding of the size distribution of the Patagonian toothfish by depth.

• Journal of Ocean Engineering and Technology
• /
• v.25 no.4
• /
• pp.42-47
• /
• 2011

In this paper, wake equalizing duct (WED) form optimization was carried out using computational fluid dynamics (CFD) techniques. A WED is a ring-shaped flow vane with a foil-type cross-section fitted to a hull in front of the upper propeller area. The main advantage of a WED is the power savings resulting from the uniformity of the velocity distribution on the propeller plane, a reduction in the flow separation at the aft-body, and lift generation with a forward force component on the foil section. This paper intends to evaluate these functions and find an optimized WED form for minimizing the viscous resistance and equalizing the wake distribution. In the optimization process, the study uses four WED parameters: the angle of the section, longitudinal location, and angles of the axes for the half rings against the longitudinal and transverse planes of the ship. KRISO 300K VLCC2 (KVLCC2) is chosen as an example ship to demonstrate the WED optimization. The optimization procedure uses genetic algorithms (GAs), a gradient-based optimizer for the refinement of the solution, and Non-dominated Sorting GA-II(NSGA-II) for Multiobjective Optimization. The results show that the optimized WED can reduce the viscous resistance at the expense of the uniformity of the wake distribution.

• Asian Journal of Turfgrass Science
• /
• v.13 no.2
• /
• pp.113-124
• /
• 1999

This study was carried out to know the oviposition preference site of chestnut brown chafer ( CBC ), Adoretus tenuimaculatus and its temporal activity and spatial distribution in green. Larval distribution was also investigated in golf courses for the control of CBC. CBC collected from Yongwon Golf Club in Chinhae, Tongdo Golf Club in Yangsan, Gyeongsan Province, Daegu Golf Club in Gyeongsan, Kyeongbuk Province, Dongrae Golf Club laid more eggs on broableaf of Zoysia matrella than Z. japonica, broadleaf+middleleaf of Z. matrella, Poa pratensis, and P. annua. The number of CBC egg was $19.7\pm$6.7 in Z. japonica,$ 1.7\pm$1.5 in P. pratensis, $1.3\pm$1.5 in sandy loam and $5.7\pm$2.9 in sand. Acitivity time of CBC in a day was the peak at 20:00 and continued to 24:00. CBCs adults were more collected from outside of golf courses whichhad many host plants than roadside courses. Density of white grubs was significantly different in fairway only. CBCs were more collected at tee and fairway than green. Density of white grubs was $54.6\pm$100 in broadleaf of Z. matellia and $37.7\pm$33.8 in P. pratensis at the back tee of the 7th hole in Dongrae Golf Club.

• Architectural research
• /
• v.10 no.1
• /
• pp.33-39
• /
• 2008

Condensation has mainly occurred in corridor type apartment door which is exposed to the outside air and is made of steel, which has high thermal conductivity. As a result, the total costs of repair have increased with the number of disputes with residents. In this study, therefore, we investigate materials and construction methods used in apartment door, perform a computer simulation to find out possible improvements, and then suggest the dew point to prevent the occurrence of condensation throughout simulation. The results indicate that the temperature that condensation does not occur is $15.4^{\circ}C$, and the optimum method of achieving this dew point is shown to be a door frame system including a large vertical slot to decrease the area of thermal conduction between the outer and inner portions of the door frame. Mock-up tests show that the surface temperature of the door frame was higher than the dew point, and the system can withstand severe cold conditions of $-20^{\circ}C$. In application test, the surface temperature of door frame with vertical slots is $5.9^{\circ}C$in average, which is higher than the existing door frame. Furthermore, in the temperature distribution of the surrounding door measured with infrared ray camera, the existing door shows the high temperature distribution indicating lack of insulation, but the improved door shows the low temperature distribution indicating higher insulation.