• 한국응용과학기술학회지
• /
• 제22권3호
• /
• pp.250-256
• /
• 2005

This study was aimed to investigate treatment feasibility of leachate from D landfill that is located in gyr대ungbuk. From the analytical results of leachate, organic and nonbiodegradable matters were contained in high concentration. Thus chemical treatment was introduced to degrade nonbiodegradable matters in pre or post biological process. Two types of Fenton oxidation were adapted in this study. The first one is pre treatment process before biological treatment. The second one is post treatment process after biological treatment. The optimal conditions of both treatment methods were investigated as follows. In case of pre treatment process, the optimal conditions appeared in $Fe^{+2}/H_2O_2$(mmol/mmol): 0.1, $H_2O_2/CODcr$(mg/mg): 27.0, pH: 3 and reaction time: 2hrs. On the other hand, in case of post treatment process, the optimal conditions appeared in $Fe^{2+}$(mmol/mmol): 0.14, $H_2O_2/COD_{cr}$(mg/mg): 57.4, pH: 3 and reaction time: 1.25hrs. In the above optimal conditions, high COD removal was obtained in pre and post treatment process. Also it can expect that Fenton oxidation converted nonbiodegradable matters into biodegradable matters.

• 한국응용과학기술학회지
• /
• 제22권4호
• /
• pp.379-384
• /
• 2005

In general, water treatment sludge (WTS) had high concentration of heavy metal, thus it made the reuse or recycling of WTS difficult. The optimal solidification conditions for maximum suppression of heavy metal elution from WTS were decided in this study. Under the optimal solidification conditions (i.e., temperature, $320^{\circ}C;$ ratio of WTS and MgO, 9:1; solidification time, 1hr), all of heavy metal including aluminum were not detected. Therefore there are no problems for reuse or recycling of WTS which was solidified under the optimal solidification conditions found in the study.

• 동아시아식생활학회지
• /
• 제11권3호
• /
• pp.219-224
• /
• 2001

This study was conducted to investigate the optimal conditions for the growth of soybean sprouts by ozone water watering. Optimal conditions for ozone water watering of soybean sprouts during cultivation at 2$0^{\circ}C$ were evaluated with ozone concentration(0.1~O.5 ppm) and watering frequency(1~9 times) by response surface methodology. The optimal conditions for growth of soybean sprouts were ozone concentrations of 0.20~0.32 ppm, ozone treatment frequency of 3.0~4.4 times. Germination rates, hypocotyl weights and hypocotyl lengths in the soybean sprouts cultivated under the optimal conditions increased by 13.3, 10.1 and 11.9%, respectively, whereas root weights decreased by 89.0%.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2022년도 추계학술대회
• /
• pp.61-61
• /
• 2022

For high quality bread wheat production in Korea, it is necessary to develop optimal nitrogen (N) fertilizer methods. For optimal N fertilizer, we evaluated the alteration of growth, yield, yield components and end-use qualities according to the treatment of N fertilizer amounts and timings at heading stages. Growth, yield, yield components, and end-use quality weren't altered by various timings of N fertilizer treatment conditions whereas, 1,000 grain weight and lodging degree was increased by increasing amounts of N fertilizer treatment conditions at 7 days after heading (7 DAH). Especially, lodging degree was significantly increased by 6kg/10a of N fertilizer treatment conditions at 7 DAH. The flour protein contents increased by various amounts of N fertilizer treatment conditions. However, SDS-sedimentation and bread loaf volumes were decreased by exceeding 6kg/10a of N fertilizer treatment conditions at 7 DAH. When considering the quality of bread, 6kg/10a N fertilizer treatment is best, but 3kg/10a N fertilizer treatment is more suitable for both quality and lodging at 7 DAH. Therefore, it is preferable to fertilize 3kg/10a of nitrogen at 7 DAH in addition to standard fertilizer when cultivate bread wheat.

• 환경위생공학
• /
• 제15권4호
• /
• pp.20-25
• /
• 2000

The wastewater treatment for the purpose of water-recycling was performed using Fenton's & ozone's methods. These methods were used to increase the treatment efficiency of textile wastewater and to search for the optimal operating conditions. The optimal conditions by Fenton process were determined so that input amounts of $FeSO_4{\cdot}7H_2O$ and $H_2O_2$ were $7.2mM/{\;}{\ell}$ and $49.0m/{\;}{\ell}$ respectively, treatment by ozone process had 92% removal efficiency at ozone concentration of 9.73g/min and $130mM/{\;}{\ell}$ of $H_2O_2$.

• 미생물학회지
• /
• 제40권2호
• /
• pp.160-166
• /
• 2004

The optimal conditions for production of Monascus sp. KM100l cell mass on submerged culture and production of monacolin K on rice solid culture were investigated. An overproducing mutant of Monascus pigments, KM 1001 mutant, from Monascus purpureus KCCM60016 was selected by NTG treatment. The optimal medium for the production of KM100l mutant cell mass is instructed to be composed of 3% glucose, 2% yeast extract, 0.1 % KH$_2$PO$_4$, 0.05% The optimal conditions for production of Monascus sp. KM100l cell mass on submerged culture and production of monacolin K on rice solid culture were investigated. An overproducing mutant of Monascus pigments, KM 1001 mutant, from Monascus purpureus KCCM60016 was selected by NTG treatment. The optimal medium for the production of KM100l mutant cell mass is instructed to be composed of 3% glucose, 2% yeast extract, 0.1 % KH$_2$The optimal conditions for production of Monascus sp. KM100l cell mass on submerged culture and production of monacolin K on rice solid culture were investigated. An overproducing mutant of Monascus pigments, KM 1001 mutant, from Monascus purpureus KCCM60016 was selected by NTG treatment. The optimal medium for the production of KM100l mutant cell mass is instructed to be composed of 3% glucose, 2% yeast extract, 0.1 % $(KH_2PO_4$, 0.05% $MgSO_4{\cdot}7H_2O$, 0.2% L-asparagine, pH 4.5, and the optimal inoculum size and shaking speed were $1.5{\times}10^6$ spores/50 m1 medium and 150 rpm, respectively. On optimal conditions, 4.1 g/l of the cell mass was obtained at 28$^{\circ}C$ for 3 days. The mycelium were inoculated on 500 g of steamed rice using vinyl bag ($30.6{\times}44$ cm) and incubated at $30^{\circ}C$, 85% humidity for 21 days. Lactone form monacolin K was rapidly increased for 2 days and reached highest concentration of monacolin K (2,930 mg/kg) for 15 days, and monacolin K was decreased after 15 days.

• 한국의류학회지
• /
• 제36권6호
• /
• pp.653-662
• /
• 2012

This study measured the effect of general pre-treatment on PLA fabrics to confirm the benefits of enzymatic processing on PLA fabrics in the textile industry as well as evaluated the hydrolytic activities of three lipases. The effects of lipase hydrolysis were analyzed through moisture regain, dyeing ability, tensile strength, and surface morphology. As a result, PLA fibers were easily damaged by a low concentration of sodium hydroxide and a low treatment temperature. The optimal treatment conditions of Lipase from Candida cylindracea were pH 8.0, $40^{\circ}C$, and 1,000 U. The optimal treatment conditions for Lipase from Candida rugosa were pH 7.2, $37^{\circ}C$, and 1,000 U. The optimal treatment conditions for Lipase from Porcine pancreas were pH 8.0, $37^{\circ}C$, and 2,000 U. The moisture regain and dyeing ability of PLA fabrics increased and the tensile strength of PLA fabrics decreased. The results of surface morphology revealed that there were some cracks due to hydrolysis on the surface of the fiber.

• 한국환경보건학회지
• /
• 제37권2호
• /
• pp.159-164
• /
• 2011

We describe a method for effectively pretreating soil highly that has been contaminated with fluorene (${\gg}$ 120 mg/kg soil), i.e., we apply Fenton oxidation in which ethanol is added to increase fluorene removal. To obtain maximum fluorene removal efficiency, a minimum of 1.0 ml of ethanol, 0.35 ml of $H_2O_2$, and 0.2 ml of 0.5M $Fe^{2+}$ was needed per 1 g of fluorene-contaminated soil. Under optimal Fenton oxidation conditions, 13% of 9-fluorene was generated during Fenton oxidation of 43% fluorene. The biodegradability of 9-fluorenone was subsequently confirmed to be much more rapid than that of fluorene, i.e., biodegradability of 96% versus 35% over 31 days. These results demonstrate that the proposed treatment method can be effectively applied to remove fluorene prior to disposal at industrial waste sites.

• Journal of Animal Science and Technology
• /
• 제55권6호
• /
• pp.545-549
• /
• 2013

The optimal conditions for applications of an atmospheric pressure plasma (APP) jet for the inactivation of Salmonella Typhimurium in chicken breast and pork loins were investigated. APP jet treatment for 10 min (versus 5 minutes) showed a higher inactivation of S. Typhimurium in an agar plate, with the best effect at a distance of 20 mm. A treatment on both sides (both-side treatment) for 2.5 + 2.5 min showed a greater inhibition on S. Typhimurium growth compared to single-side treatment for 5 min, with reduction levels of 0.66 log CFU/g in chicken breast and 1.33 log CFU/g in pork loin, respectively. However, there was no significant difference between single-side treatment for 10 min and both-side treatment for 5 + 5 min in chicken breasts and pork loin samples. In conclusion, APP jet treatment conditions, including distance, time, and direction, may affect the inactivation efficiency of S. Typhimurium. In this experiment, distance of 20 mm and both-side treatment were the best conditions. Therefore, the optimal APP jet treatment conditions were evaluated to maximize its practical efficiency.

• Applied Biological Chemistry
• /
• 제37권4호
• /
• pp.295-302
• /
• 1994

광합성세균에 의한 고농도 유기폐수 처리공정의 개발을 목적으로 폐수처리용 균주를 분리 동정하고 최근 고농도 유기폐수처리에 도입되고 있는 혐기성 소화와 광합성세균 반응조로 구성된 two-stage system에 적용시켜 각 단계별 폐수처리 최적화를 위한 조건들을 flask-scale에서 검토하였다. 부영양화된 토양, 연못, 논, 활성오니 등으로부터 1차적으로 활성이 높고 유기산 자화율이 우수한 균주를 분리하고 이중 가장 우수한 균주인 KK14를 선별하고 동정한 결과 Rhodopseudomonas palustris로 판명되었다. 광합성세균을 이용한 폐수처리공정의 첫단계인 산생성 단계에서는 혐기정치배양이 유기산 생성에 적합하였고 pH 5.0, HRT 2일로 운전시약 80%의 유기산 증가율을 보였다. 생성된 유기산이 광합성세균에 의해 자화되는 둘째 단계에서는 광합성세균 반응조의 조건을 pH 7.0, 온도 $30^{\circ}C$, 조도 4,000 lux로 했을 때 균의 생육도 및 유기산 자화율이 가장 우수했으며 초기 COD부하(kg COD/kg 광합성세균 건조중량)는 2 전후에서 가장 높은 COD제거율(92%/5일)을 나타내었다.