• Journal of the korean academy of Pediatric Dentistry
• /
• v.29 no.3
• /
• pp.313-317
• /
• 2002

Asymmetry in the face and dentition is a naturally occurring phenomenon. Functional asymmetry can result the mandible being deflected laterally if occlusal interferences prevent proper intercuspation in centric relation. Five year old girl was referred to the pediatric department for mandibular deviation. The patient had right posterior crossbite and 2.5mm midline deviation due to dental caries on the primary teeth. The authors used the activator as occlusal splint for eliminating habitual posturing and deprogramming the musculature in the treatment of functional asymmetry and for occlusal stabilization restored the primary molars with cast crowns.

• The Journal of the Korean dental association
• /
• v.58 no.3
• /
• pp.140-151
• /
• 2020

Purpose: To evaluate reliability of Q-ray view (Aiobio Inc,. Seoul, Korea) for assessing retention status of pit and fissure sealants. Methods: Pit and fissure sealants of 58 permanent molars from 15 third-grade students were examined. Posterior teeth with ≥1 pit and fissure sealants applied to the occlusal surface for >6 months were examined. The teeth were examined using traditional visual-tactile assessments and combined Q-ray view. Pit and fissure sealants were evaluated by assessing marginal plaque, marginal discoloration, marginal integrity, retention, and presence of caries. Fleiss kappa and Cohen's kappa values were calculated to compare inter- and intrarater agreements between visual-tactile and combined Q-ray view assessments. Results: Regarding interrater agreement in visual-tactile assessments, K values of Cohen's kappa for marginal plaque, marginal discoloration, and presence of caries were 0.22-0.57, 0.36-0.57, and 0.43-0.61, respectively, and agreements ranged from slight to moderate. When combined with Q-ray view, the values were 0.81-0.89, 0.69-0.88, and 0.80-0.90, respectively, and agreements ranged from substantial to nearly perfect level, indicating statistical significance. Marginal plaque (0.81-0.83), marginal discoloration (0.57-0.89), and presence of caries (0.69-0.91) showed higher agreements in combined Q-ray view than in visual-tactile assessments, and kappa values of marginal plaques were significantly higher in combined Q-ray view than in visual-tactile assessments. Conclusion: Evaluating retention status of pit and fissure sealants using Q-ray view showed higher reliability than using visual/tactile assessments for marginal plaque, marginal discoloration, and presence of caries. Therefore, Q-ray view may be used to assess the retention status of pit and fissure sealants.

• Restorative Dentistry and Endodontics
• /
• v.30 no.1
• /
• pp.49-57
• /
• 2005

The purpose of this study was to evaluate the effect of multiple application of all-in-one dentin adhesive system on microtensile bond strength to caries-affected dentin. Twenty one extracted human molars with occlusal caries extending into mid-dentin were prepared by grinding the occlusal surface flat. The carious lesions were excavated with the aid of caries detector dye. The following adhesives were applied to caries-affected dentin according to manufacturer's directions; $Scotchbond^{TM}$ Multi-Purpose in SM group, Adper Prompt $L-Pop^{TM}$ 1 coat in LP1 group, 2 coats in LP2 group, 3 coats in LP3 group, $Xeno^{(R)}$ III 1 coat in XN1 group, 2 coats in XN2 group. and 3 coats in XN3 group. After application of the adhesives, a cylinder of resin-based composite was built up on the occlusal surface. Each tooth was sectioned vertically to obtain the $1{\times}1\;mm^2$ sticks. The microtensile bond strength was determined. Each specimen was observed under SEM to examine the failure mode. Data were analyzed with one-way ANOVA. The results of this study were as follows; 1. The microtensile bond strength values were; SM ($14.38{\pm}2.01$ MPa), LP1 ($9.15{\pm}1.81$ MPa), LP2(14.08{\pm}1.75$ MPa), LP3 ($14.06{\pm}1.45$ MPa). XN1 (13.65{\pm}1.95$ MPa). XN2 ($13.98{\pm}1.60$) MPa, XN3 ($13.88{\pm}1.66$) MPa, LP1 was significantly lower than the other groups in bond strength (p < 0.05). All groups except LP1 were not significantly different in bond strength (p > 0.05). 2. In LP1, there were a higher number of specimens showing adhesive failure. Most specimens of all groups except LP1 showed mixed failure.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.32 no.1
• /
• pp.70-79
• /
• 2016

Patients who lost posterior teeth due to periodontitis or dental caries have collapsed vertical dimension, unstable occlusion and change of the mandibular position. In particular, patients in orthognathic surgery, clinician should re-establish the pre-operative stable position of mandibular condyle in articular fossa and favorable vertical dimension for high post-operative stability of mandible. Therefore, interdisciplinary approach and co-operation, including prosthetics, orthodontics, oral and maxillofacial surgeon, from diagnosis and treatment plan is important to get a good outcome. This case report was patients who had collapsed occlusal plane due to severe dental caries on maxillary molars with skeletal Class III malocclusion. Before orthognathic surgery, resetting of maxillary occlusal plane with temporary removable denture was performed. Then successful multidisciplinary approach was done and lead to acceptable clinical outcome.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.30 no.4
• /
• pp.329-338
• /
• 2014

Patients who lost molars from dental caries or periodontitis have difficulty in maintaining their vertical dimension because their incisors and premolars also show vertical tooth movement. Missing posterior molars leads to occlusal interference and collapse of occlusal plane due to extrusion of opposite teeth and tipping of adjacent teeth. When this condition persists over long time, mandible moves forward, so it causes mobility and labioversion of upper incisors. This progress cannot be stopped spontaneously and the situation gets worse and worse. Therefore, for a patient with pathologic teeth migration caused by chronic periodontitis, interdisciplinary approach which is including periodontal treatment, orthodontic teeth alignment and prosthetic restoration of missing molars is required. This case report shows successful multidisciplinary approach to a patient who lost vertical dimension due to severe dental caries and periodontitis.

• The Journal of Korea Assosiation for Disability and Oral Health
• /
• v.15 no.1
• /
• pp.23-28
• /
• 2019

People with intellectual disabilities (ID) usually have poor oral health status and are susceptive to have more caries than general populations. Even when the patients get regular dental treatment, their dental conditions are usually not good for some additional factors. In this presentation, we show dental follow-up care of two patients who have multiple caries. The first case is a 16-year-old boy who has a unilateral facial paralysis with ID. As the lack of controlling of the muscles resulted in interfering with the self-cleansing, it would be associated with a higher incidence on the affected side. Endodontic treatment and caries treatment as restoration was performed. Due to loss of posterior occlusal support on right side, we planned to recover the right posterior relationship by full coverage restorations. In second case, a 20-year-old boy has been on a long-term follow up. Caries treatment, periodontal treatment, and prosthetic treatment were performed under several times of general anesthesia. He has been treated more than 8 years and gets a regular check at 1-month intervals, however, high dental caries susceptibility has been retained. These cases present that dentists should perform more aggressive treatment and be involved in providing better maintenance of patients with intellectual disabilities with multiple caries in adolescence. In other words, it is necessary to suggest a customized preventive strategy for patients with ID.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.23 no.2
• /
• pp.389-400
• /
• 1996

In Class II amalgam restoration in deciduous molar, failure rate and incidence of recurrent caries are high as children become older. In order to preserve deciduous molars till the physiologic exfoliation time, stainless steel crown is a choice of the treatment. As a result of a careless treatment, such as overhanging margin, poor marginal adaptation, poor proximal contour and inadequate mesiodistal width give rise to interfering eruption of the adjacent teeth, recurrent caries and chronic gingival irritation and insufficient arch length respectively. In this study, 252 s.s. crowned teeth extracted due to physiologic exfoliation or periapical lesion. The purpose of this study is to analyze the marginal adaptation of stainless steel crown to the deciduous molar in order to obtain better clinical result. The results were as follows : 1. Between the length of s.s. crown and the marginal gap of crown, positive correlations were shown. 2. Largest amount of marginal gap was shown at buccal side in upper deciduous molars and lower first deciduous molar, lingual side in lower second deciduous molar. But no significant diffrence were found statistically compared to second most largest one. 3. Incidence of exposed restoration and recurrent caries were higher in proximal surface than buccal/lingual surface. And extension of restoration below the margin of s.s. crown gives rise to higher rate of recurrent caries. 4. Defect of contour was found in 34%, frequently found in lower 1st deciduous molar and upper 1st deciduous molar. 5. Marginal polishing defects were found in 23%. 6. Ledge was formed in 10% especially in lower 1st deciduous molar and lower 2nd deciduous molar. 7. 16% of the teeth had wear facet due to traumatic occlusion, 7% of them had occlusal perforation.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.1
• /
• pp.129-141
• /
• 2001

When oral microorganisms were sampled from occlusal surfaces of caries and non-caries teeth, $3.43\times10^5$ CFU and $3.47\times10^3$ CFU of bacteria were counted on MSB agar plates, respectively. All the 20 colonies isolated from a caries surface were Streptococcus mutans but, only two of 20 colonies were identified as Streptococcus mutans by API test. S. mutans SM1 from caries tooth and S. mutans SM2 from non-caries tooth showed the same results except for $\alpha-galactosidase$ activity on sugar fermentation tests and biochemical tests. For the bacterial replication, both SM1 and SM2 were actively multiplicated at pH 5.5. And the viability of SM1 was high at 20% of sucrose, while that of SM2 was high at 5% of sucrose in the media. SM1 actively replicated at 16mM of $CaCl_2$, 160mM of KCl, and 6.4mM of $MgCl_2$, and the replication of SM2 was increased at 16mM of $CaCl_2$, 40mM of KCl, 6.4mM of $MgCl_2$. At 1mM of sodium bicarbonate and sodium phosphate, both bacteria were actively multiplicated. SM1 and SM2 were actively replicated at 1mM and 10mM of Tris, respectively. For potassium phosphate buffer, SM1 grew well proportionally to the concentration up to 100mM, while the growth of SM2 were inhibited by the increase of concentration. The 4.6 kb of gtf gene was amplified with a pair of primer, gtfB-F961 and gtfC-R5574 by polymerase chain reaction from the chromosomal DNA of SM1 and SM2. When 4.6kb bands were eluted from gel and were treated with restriction enzyme, EcoR I produced the same RFLP like 0.8kb and 3.8kb of DNA fragments for S. mutans GS-5, SM1 and SM2. By Hind III, the PCR products weren't digested for S. mutans GS-5 and SM1, but 3 fragments such as 2.4kb, 1.8kb and 400bp were examined for SM2. These results indicated the difference between gtf genes of SM1 and SM2. BamH I treatment showed 4 fragments for SM1 and SM2, while the 3 fragments for S. mutans GS-5. The PCR products were not digested by Kpn I, Sma I, Xho I and Pst I.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.49 no.1
• /
• pp.65-75
• /
• 2022

The aim of this study was to evaluate QLF (quantitative light-induced fluorescence) technology for the caries detection in primary teeth and validate the relationships between the cavity volume of carious lesions and QLF analysis results. Total 125 tooth surfaces include 53 occlusal surfaces, and 72 proximal surfaces were investigated with the portable QLF device for detection of dental caries in primary molars. Micro-CT radiograph was also performed to classify carious lesions and calculate the cavity volume. QLF showed good accuracy and reliability (sensitivity 0.75 - 0.94, specificity 0.82 - 0.95, and AUROC 0.88 - 0.98) for the caries detection in primary teeth except 𝚫R average results of proximal caries which showed relatively low values. Statistically significant relationships were found between 𝚫F average, QS-Index and the cavity volume according to Spearman rank-order correlation coefficients (r = 0.805 - 0.832, p < 0.001). QLF detection method would be a harmless and reliable way for children to diagnose dental caries without the concern about radiation exposure.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.29 no.1
• /
• pp.45-58
• /
• 2013

The purpose of this study was to analyze the area of occlusal contact points using visual method. One subject was selected who had Angle Class I, normal dentition, without dental caries, periodontal disease and temporomandibular disorders. Forty times PVS impressions were taken and 10 pairs casts were fabricated using dental super hard stone. After mounting the casts with customized loading apparatus, 78.9kg/f force was loaded as a maximum biting force. In T-Scan method, occlusal contact points measurement was repeated twice. Then, using Photoshop program (Adobe photoshop CS3, Adobe. San Jose, USA), the pixels which indicated occlusal contact points by color was recognized, and the distribution of recognized pixels were calculated to area. In Add picture method, polyether bite material applied to the occlusal surface of the casts. Then, the image of the translucent areas was recorded and classified $0{\sim}10{\mu}m$, $0{\sim}30{\mu}m$, $0{\sim}60{\mu}m$ area by the amount of transmitted light. To acquire occlusal surface, the numbers of pixels from the photograph of the contact area indicated cast converted to $mm^2$. The mean occlusal contact area by two methods was statistically analyzed (paired t-test). Part of the red and pink area in T-Scan image were almost equivalent to the $0{\sim}10{\mu}m$, $0{\sim}30{\mu}m$, $0{\sim}60{\mu}m$ area in Add picture image. The distribution of occlusal contact points were similar, but the average area of occlusal contact points was wider in T-scan image (P<.05). Pink and red area in T-scan image was wider than $0{\sim}10{\mu}m$, $0{\sim}30{\mu}m$ area in Add picture image (P<.05), but similar to $0{\sim}60{\mu}m$area in Add picture image (P>.05). Occlusal contact points in T-scan image did not indicate real occlusal contact points. Occlusal contact areas in T-scan method were enlarged results comparing with those in Add picture method.