• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.603-608
• /
• 2004

The paper analyzes a scheme of decontamination of radionuclides from concrete structures, in which rapid microwave heating is used to spall off a thin contaminated surface layer. The analysis is split in two parts: (1) The hygrothermal part of the problem, which consists in calculating the evolution of the temperature and pore pressure fields, and (2) the fracturing part, which consists in predicting the stresses, deformations and fracturing. The rate of the distributed source of heat due to microwaves in concrete is calculated on the basis of the standing wave normally incident to the concrete wall with averaging over both the time period and the wavelength because of the very short time period of microwaves compared to the period of temperature waves and the heterogeneity of concrete. The reinforcing bars parallel to the surface arc treated as a smeared steel layer. The microplane model M4 is used as the constitutive model for nonlinear deformation and distributed fracturing of concrete. The aim of this study is to determine the required microwave power and predict whether and when the contaminated surface layer of concrete spalls off. The effects of wall thickness, reinforcing bars, microwave frequencies and power are studied numerically. As a byproduct of this analysis, the mechanism of spalling of rapidly heated concrete is clarified.

• 한국BIM학회 논문집
• /
• 제5권3호
• /
• pp.33-40
• /
• 2015

Over a few decades, off-site construction (OSC) has been widely used for building and bridge constructions. OSC is a construction method that build structures at a different location than the location of use, and normally it occurs in a manufacturing plant. There are many studies on the perceived benefits of OSC, yet relatively few studies which quantitatively assess the benefits and factors affecting the decision of the use of OSC have been investigated. This study investigates the influencing factors of the use of OSC system and its revitalization solutions in the construction industry. As the research method, interview and questionnaire survey are conducted by visiting industry experts of OSC and sending a questionnaire to the OSC stakeholders including engineers, manufacturers, contractors and clients in the United Kingdom (UK). The construction industry of the UK is targeted for the study since it has a number of commons with the Korean construction industry in terms of the structure of the construction industry and current low take-up of the OSC. The survey provides the results that the reluctance of clients to use OSC is the key factor of the slow use of OSC despite of the perceived benefits of OSC. In addition, in order to revitalize OSC in the construction market, three revival recommendations are suggested based on the survey results.

• 한국항해항만학회지
• /
• 제28권5호
• /
• pp.365-372
• /
• 2004

LNG 운반선은 항해중 외부로부터 다량의 열 침입으로 인해 많은 BOG가 발생하며 통상 이는 선박엔진의 연료로 사용된다. 화주의 입장에서 이러한 BOG의 발생과 소비는 화물의 손실을 의미하며, 따라서 선주와 화주 사이에는 BOR에 대해 만선항해를 기준으로 0.15%/day 이하가 되도록 운송계약을 체결한다. LNG 운반선의 항해사관 입장에서는 자신이 승무하고 있는 선박의 BOR에 대한 정확한 지식을 바탕으로 선박을 운항할 필요가 있으나 실제로는 막연한 경험에 의존하고 있는 실정이다. 따라서 본 연구에서는 신체온도분포 및 외부로부터의 침입열량에 관한 정밀 열설계 기술을 토대로 본선의 해기사들이 보다 간편하게 BO를 예측할 수 있는 간단한 모델을 제시하였다. 그리고 개발된 모델을 사용하여 연구대상 선박의 설제 기상조건을 토대로 만선 및 공선항해에 대하여 각각 BOR을 계산하였으며 이를 실측자료와 비교, 검토하였다. 본 연구에서 제시된 BOG 예측방법은 현재 운항중인 LNGC에서 BOG를 관리하는 유용한 도구로 사용될 것으로 기대된다.

• Journal of the Optical Society of Korea
• /
• 제17권4호
• /
• pp.336-343
• /
• 2013

Recently various types of driver assistance systems have been used for automobiles. In 2008, the U.S Congress passed a law which required that most cars be equipped with devices to warn objects behind the vehicle. Because of that, market of rear view cameras is expected to rise dramatically. Therefore many suppliers try to provide a wide angle camera for car makers. But a high distortion is caused by the wide angle might result in lower image quality. In order to improve the image quality, normally we use an algorithm to correct a distortion. Though we can improve the distorted image by correction algorithm, we must pay more cost to use it. In this paper, we propose a new optical system reducing a distortion in contrast to a conventional lens without cost. In other words, we can see only an area of interest. That is similar to reducing a field of view. Using a new optical system, we can get a less distorted image. In order to view an area of interest, we introduce an off axis optical system having refractive surfaces and reflective surfaces. In this paper, we describe the results of design and, evaluation of an off axis wide angle compact imaging system. In comparison to conventional wide angle lens, we can get the improvement of MTF, distortion, and lateral color aberrations. And we also can reduce a total cost because we don't need the outer apparatus or bracket to mount on the car.

• 한국항행학회논문지
• /
• 제28권1호
• /
• pp.95-101
• /
• 2024

본 논문에서는 다양한 eVTOL (electric vertical take-off and landing) 항공기의 안전성 평가 수행을 위한 가변형 시뮬레이션 환경을 구축하고자 한다. eVTOL 항공기마다 적용되는 Inceptor, 항공기 동역학 모델, 제어기가 상이하므로, 이를 가변형으로 구성하여 eVTOL 항공기마다 안전성 시험 평가 시뮬레이션을 수행할 수 있도록 구성하였다. eVTOL 항공기의 안전성 평가 수행을 위한 시험 항목 및 성능 지표를 설정하였으며, 시험 항목별 시험절차에 따라 안전성 시험 평가 시 필요한 지상보조설비를 구상하여 시뮬레이션 환경에 구현하였다. 또한, 시뮬레이션 내 eVTOL 항공기의 데이터를 활용한 안전성 성능 분석을 위해 MATLAB/Simulink 기반의 시뮬레이션 비행데이터 수집 환경을 구축하고, 안전성 성능 분석을 위한 툴을 구현하였다. 최종적으로 본 논문에서 구현한 가변형 시뮬레이션 환경에서의 안전성 시험 비행 수행 및 성능 분석을 수행하였으며, 정상적으로 수행되는 것을 확인함으로써 시뮬레이션 환경을 검증하였다.

• Journal of the Optical Society of Korea
• /
• 제8권2호
• /
• pp.59-64
• /
• 2004

The response of a single-mode fiber to a sinusoidally modulated input has been studied to see its utility in measuring system performance in the presence of fiber nonlinearities. The sinusoidally modulated signal models an alternating bit sequence of ones and zeros in on-off keying. The sinusoidal response of normally dispersive fiber shows a strong correlation with eye-opening penalty (EOP) over a wide range of the nonlinearity parameter N (0.1 ＜ N$^2$＜ 100). This result implies that the measurement of the sinusoidal response can be an alternate way of measuring EOP without having a long sequence of randomly modulated input bits. But in the anomalous dispersion region, the sinusoidal response has a much more limited range of application to estimate system performance.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.1503-1510
• /
• 2011

The dropper length calculation method about the normal same encumbrance spans is well known independent to whether the pre-sag is given or not. But, the dropper length calculation method for the elevating span which consists in the end area of a tensioning section and normally consists with overlaps is not well known. In this study, firstly, we investigate the dropper length calculation method about the elevating span whether the insulator is contained in or not, we also recognize the effect of dropper length due to the change of the take-off point. Secondly, we very this calculation method with a catenary sample data and check again with Gyeongbu HSL design data.

• International journal of advanced smart convergence
• /
• 제6권4호
• /
• pp.1-8
• /
• 2017

In this work, the effects of fairly influential factors on performance of vacuum system, such as constant pressure and outgassing effect were simulated to propose the optimum design factors. Outgassing effects of selected vacuum materials on the vacuum characteristics were simulated by the $VacSim^{Multi}$ simulation tool. This investigation examined the feasibility of reliably simulating the outgassing characteristics of common vacuum chamber materials (aluminum, copper, stainless steel, nickel plated steel, Viton A). The optimum design factors for vacuum systems were suggested based on the simulation results. And, the effects of throttle valve applications on vacuum characteristics were also simulated to obtain the optimum design model of variable conductance on high vacuum system. Simulated vacuum characteristics of the proposed modelling were agreed with the observed experimental behaviour of real systems. Pressure limit valve and normally on-off control valve were schematized as the modelling of throttle valve for the constant process-pressure. Simulation results were plotted as pump-down curve of chamber and variable conductance of throttle valve. Simulated behaviors showed the applications of throttle valve sustained the process-pressure constantly, stably, and reliably.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.31-35
• /
• 2001

IGCTs have established themselves as the power semiconductor of choice at medium voltage levels within the last few years because of their low conduction and switching losses. The trade-off between these losses can be adjusted by various lifetime control techniques and the growing demand for these devices is driving the need for standard types to cover such applications as Static Circuit Breakers (low on-state) and Medium Voltage Drives (low switching losses). The additional demands of Traction (low operating temperatures) and Current Source Inverters (symmetric blocking) would normally result in conflicting demands on the semiconductor. This paper will outline how a range of power devices can meet these needs with a limited number of wafers and gate units. Some of the key differences between IGCTs and IGBTs will be explained and the outlook for device improvements will be discussed.

• 한국항해학회지
• /
• 제19권3호
• /
• pp.11-19
• /
• 1995

When an automatic course keeping is introduced, as is quite popular in modern navigation, the closed-loop control system consists of autopilot device, power unit, steering gear, ship dynamics, and magnetic or gyrocompass. We derive mathematical models of each element of the automatic steering system. We provide a method of theoretical analysis on the propulsive energy loss related to automatic steering of ships in the open seas, taking account of the on-off(non-linear) characteristics of power unit. Also we paid attention to non-linear element installed in autopilot device, which is normally called weather adjuster. Next we make numerical calculation of the effects of autopilot control constants on the propulsive energy loss for two kinds of ship, a fishing boat and an ore carrier. Realistic sea and wind disturbances are employed in the calculation.