• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2004.10a
• /
• pp.477-480
• /
• 2004

최근 생산 현장에 최종 제품의 성능 보장을 위해 사용될 소재의 특성을 검사하는 장비가 도입.운영되고 있다. 이들 장치 중 Rheotruder는 폴리머 소재의 품질 평가기준이 되는 점도를 측정하기 위해 제작되었으며 이는 지연시간 및 비선형적 특성을 갖게 되어 시스템의 분석이 용이하지 않다는 문제점을 갖는다. 본 연구에서는 비선형 특성을 갖는 측정 장치의 성능 평가를 용이하게 하기 위해 동적 시스템 모델링이 가능한 TDNN(Time Delay Neural Network)을 도입하여 실제 Rheotruder에 적용하여 봄으로써 그 유용성을 확인하고자 한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1485-1488
• /
• 1997

The capacity of memory chip has increased vert quickly and 64MDRAM becomes main product in semiconductor manufacturing lines consists of many sequential processes, including etching process. although it needs direct sensing of wafer state for the accurae detching, it depends on indirect esnsing and sample test because of the complexity of the plasma etching. This equipment receives the inner light of etch chamber through the viewport and convets it to the voltage inetnsity. In this paper, EDP voltage signal has a new role to detect etching failure. First, we gathered data(EPD sigal, etching time and etchrate) and then analyzed the relationships between the signal variatin and the etch rate using two neural network modeling. These methods enable to predict whether ething state is good or not per wafer. For experiments, it is used High Density Inductive coupled Plasma(HDICP) ethcing equipment. Experiments and results proved to be abled to determine the etching state of wafer on-line and analyze the causes by modeling and EPD signal data.

• Proceedings of the KSR Conference
• /
• 2003.10c
• /
• pp.653-658
• /
• 2003

This study is represented a method to give connect to optical cable from accident site and reviewed the method to transmission a moving image to control centre by real time, following the study of image transmission method in copper cable section where is a main line of railroad communication. Concept of network is studied to use cable and equipment effectively, and it's also reviewed technology of digital image transmission system and image evaluation methods, in spite of the pixel of camera and monitor resolution determine quality of image when moving image transferring by point to point. In addition, this study is reviewed checks and considerations of image transmission equipment (codec) with various transmission methods in room test, and then examined and analyzed wire/wireless combined transmission methods at wayside.

• Convergence Security Journal
• /
• v.14 no.7
• /
• pp.85-90
• /
• 2014

Cloud computing originated simply to request and execute the desired operation from the network of clouds. It means that an IT resource that provides a service using the Internet technology. It is getting the most attention in today's IT trends. In cloud computing networks, devices and data centers which are composed of the server, storage and application are connected over network. That is, data of computers in different physical locations are integrated using the virtualization technology to provide a service. Therefore cloud computing system is a key information resource, standardized methods and assessment system are required. In this paper, we aims to derive the parameters and information for research of technical standards stability evaluation method associated with various cloud computing equipment.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.2 s.332
• /
• pp.89-96
• /
• 2005

In this paper, we propose a customer premise platform for processing multimedia data service on the ATM network. The proposed platform has a specific AAL2 processor that includes AAL2 protocol and scheduler algorithm so as to off-load large potion of burden from host processor and make it easy to process multimedia data from the ATM network in real time compared with conventional platform in which AAL/ATM tasks are processed by software. The ATS scheduler that is implemented based on 2-level time slot ring provides a simple and efficient method for scheduling data of VBR-rt, UBR and CBR traffics. TMS320C5402 DSP is used to process voice-related tasks such as voice compression and voice packet manupulation and AAL2 processor is implemented on $0.35\;{\mu}m$ process line. We implemented the customer premise equipment for VoDSL service and tested the proposed platform on a test bed network. The experimental results show that the proposed equipment has the call success rate of $97\%$ at least and provides voice service of toll-qualify.

• Journal of IKEEE
• /
• v.13 no.3
• /
• pp.80-86
• /
• 2009

TETRA is the standard of Digital Trunked Radio System developed by the ETSI(European Telecommunications Standards Institute). It is adopted as Electric Power IT Wireless Backbone Network in Korea. To use TETRA wireless network, TETRA modem is very necessary. In this paper, the performance measurements of modem and its results are analyzed according to traffics in TETRA network. In this paper, SDS type-4 transmission method is used in the transmission standards suggested by PEI(Peripheral Equipment Interface) of ETSI. Performance measurements are done by varying the data size and transmission interval. The data size is increased by 10 bytes from 10-byte to 140-byte, and it is measured 1,000 times for each transmission interval of 0.5, 1.0, and 1.5 seconds. MU-1000MD of Unimo is used for TETRA modem, and SwMI(Switching and Management Infrastructure) of Teltronic is used for switching system in this paper.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.1
• /
• pp.14-19
• /
• 2008

In order to verify a substation automation system based on IEC 61850, Korea Electric Power Research Institute under the project related to SAS has constructed IED testing system, which consists of HMI, IED(Intelligent Electronic Device), network equipment, V/I generator, and performed a various of communication tests such as the interoperability test between two IEDs made by other vendors. The test was proceeded based on SCL(Substation Configuration Description Language). This paper presents ways and procedures to simulate those tests and solutions to clear up SCL based engineering problems and compatibility among the individual manufacture tools.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.12
• /
• pp.1735-1742
• /
• 2018

The number of electric railway failures will increase due to the external and internal effects of electric railroads. The grounding test with 25,000V is to artificially test the transmission voltage to ground, and it is possible to cause risks of electric shock and other equipment insulation damage in neighboring enclosure. In 2016, method of fault localization changed to low - voltage at 380V from artificially high- voltage in the grounding tests since opening of Seoul Metropolitan Express Railway; The method is more accurate and safer rather than the previous one because it gets more data from unlimited grounding tests. However, an electric current falls on the track section where the track branches and vehicle bases with many lines. To precisely detect a transitive phenomenon, it is necessary to continuously study and additionally install.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.49 no.8
• /
• pp.405-411
• /
• 2000

When faults occur in transmission lines, the classification of faults is very important. If the fault is HIF(High Impedance Fault), it cannot be detected or removed by conventional overcurrent relays (OCRs), and results in fire hazards and causes damages in electrical equipment or personal threat. The fast discrimination of fault needs to effective protection and treatment and is important problem for power system protection. This paper propolsed the fault detection and discrimination algorithm for LIFs(Low Impedance Faults) and HIFs(High Impedance Faults). This algorithm uses artificial neural networks and variation of 3-phase maximum currents per period while faults. A double lines-to-ground and line-to-line faults can be detected using Neural Network. Also, the other faults can be detected using the value of variation of maximum current. Test results show that the proposed algorithms discriminate LIFs and HIFs accurately within a half cycle.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.396-397
• /
• 2015

With the increasing utilization of high-voltage, direct current (HVDC) transmissions in modern power systems, the DC grid is becoming a hot topic in academic and practical systems. In the DC grid, one of the urgent problems is the fast clearance of the DC fault in the DC network. One preferred method is to isolate the faulty point from the DC network in a short time. The DC circuit breaker is to interrupt the overcurrent after DC faults occur. In this paper, a self-excited resonant DC circuit breaker is an easy and cheap equipment to interrupt the DC fault current. The Mayr's arc model is utilized to simulate the self-excited DC circuit breaker in a DC test system in PSCAD/EMTDC.