• Bulletin of the Korean Chemical Society
• /
• 제26권4호
• /
• pp.523-528
• /
• 2005

Diblock copolymers with different poly($\varepsilon$-caprolactone) (PCL) block lengths were synthesized by ringopening polymerization of $\varepsilon$-caprolactone in the presence of monomethoxy poly(ethylene glycol) (mPEG-OH, MW 2000) as initiator. The self-aggregation behaviors of the diblock copolymer nanoparticle, prepared by the diafiltration method, were investigated by using $^1H$ NMR, dynamic light scattering (DLS), and fluorescence spectroscopy. The PEG-PCL block copolymers formed the nano-sized self-aggregate in an aqueous environment by intrsa- and/or intermolecular association between hydrophobic PCL chains. The critical aggregation concentrations (cac) of the block copolymer self-aggregate became lower with increasing hydrophobic PCL block length. On the other hand, reverse trends of mean hydrodynamic diameters were measured by DLS owing to the increasing bulkiness of the hydrophobic chains and hydrophobic interaction between the PCL microdomains. The hydrodynamic diameters of the block copolymer nanoparticles, measured by DLS, were in the range of 65-270 nm. Furthermore, the size of the nanoparticles was scarcely affected by the concentration of the block copolymers in the range of 0.125-5 mg/mL owing to the negligible interparticular aggregation between the self-aggregated nanoparticles. Considered with the fairly low cac and nanoparticle stability, the PEG-PCL nanoparticles can be considered a potential candidate for biomedical applications such as drug carrier or imaging agent.

• 마이크로전자및패키징학회지
• /
• 제27권3호
• /
• pp.83-88
• /
• 2020

최근 스마트폰 산업의 발전으로 인하여 실사용 환경에서 유연소자의 기계적 거동에 대한 연구가 많이 이루어지고 있다. 유연소자 박막은 두께가 나노 단위이고, 기존의 시험법으로 측정하기 어려워 주로 나노압입시험을 이용하여 경도, 탄성계수 등의 특성을 구하고 있다. 그러나 현재 널리 쓰이고 있는 분석법(Oliver-Pharr Method)은 기판의 영향이 이론적으로 고려되지 않아 단순히 적용하기에는 무리가 있다. 따라서 본 연구에서는 기판 영향을 고려한 타 연구자들의 모델에 대한 적용성을 확인하고, 압입자와 시편 표면에서 발생하는 소성쌓임 현상(pile-up)에 대해 압입깊이의 보정을 실시하였다. 유연소자 박막의 탄성계수를 평가하고 검증하기 위하여 폴리이미드 및 실리콘 웨이퍼 기판 위에 금속, 비정질 박막을 증착하여 실제 실험을 수행하여 비교하였다.

• 대한화학회지
• /
• 제54권3호
• /
• pp.310-316
• /
• 2010

항균성을 포함한 나노 입자는 높은 활용성으로 인해 다양한 분야에 적용되고 있다. 본 연구는 HEMA (2-hydroxyethylmethacrylate), NVP (N-vinyl pyrrolidone), MMA (methylmethacrylate)에 나노 은 및 백금을 첨가한 후 농도조건을 다양화 하여 $70^{\circ}C$에서 약 40분, $80^{\circ}C$에서 약 40분 마지막으로 $100^{\circ}C$에서 약 40분 동안의 열처리 공정을 거쳐 공중합 하였다. 사용된 나노 은과 백금 입자의 크기는 각각 10 ~ 20 nm를 나타내었다. 중합 후 생성된 고분자를 사용하여 물리적 특성을 측정한 결과, 함수율 34.29 ~ 39.00%, 굴절률 1.422 ~ 1.430을 나타내었으며, 가시광선 투과율 78.8 ~ 92.5% 그리고 인장강도 값은 0.149 ~ 0.179 Kgf을 나타내었다. 나노 은과 백금 입자를 사용한 안 의료용 렌즈 재료는 콘택트렌즈 적용에 요구되는 기본적인 물성을 만족하였다.

• 한국세라믹학회지
• /
• 제52권6호
• /
• pp.497-501
• /
• 2015

Inkjet printing is a widespread technology, offering advantages such as high-quality decoration, a continuous process, and the accurate direct reproduction of patterns or pictures. In inkjet printing technology, the dispersion stability of ceramic ink is one of the most important factors. In this study, the dispersion stability of blue $CoAl_2O_4$ ink for ceramic inkjet printing is systematically investigated. Blue $CoAl_2O_4$ pigment was synthesized by a solid-state reaction and then milled to less than 300nm in size. In order to investigate the influence of the viscosity on the dispersion stability, two types of $CoAl_2O_4$ ceramic inks (termed here Blue L and Blue H) were prepared using different volume ratios of ethylene glycol and ethanol. The Blue L and Blue H ink solutions contained cetyltrimethylammonium bromide(CTAB) as a dispersive agent. The viscosity, surface tension and jetting stability of the $CoAl_2O_4$ ceramic inks were analyzed using a rheometer, a surface tension meter and a dropwatcher. The dispersion stability of the $CoAl_2O_4$ ceramic ink was investigated by a multiple light-scattering method. Blue H, a ceramic ink with higher viscosity, showed much better dispersion stability than the Blue L ceramic ink.

• Korean Chemical Engineering Research
• /
• 제55권3호
• /
• pp.430-435
• /
• 2017

$Li_4Ti_5O_{12}$ (LTO)는 리튬이차전지용 음극활물질로써 충방전에 따른 체적변화가 매우 적고, 삽입과 탈리 반응에 따른 높은 가역성 때문에 수명 특성이 좋다는 장점을 가지고 있다. 본 연구에서는 LTO의 단점인 낮은 전기전도도를 보완하고자 전도성이 좋은 탄소계열 소재인 그래핀과 CNT를 첨가 하였다. LTO입자가 나노 크기이므로, 그래핀이 LTO표면에 위치하여 전도성 향상을 시키기 어렵다고 생각했다. 따라서 추가로 CNT를 첨가시켜 LTO입자와 그래핀 사이에 전도성 네트워크를 형성하여, 그래핀만 첨가하였을 때 보다 전도성이 향상되었다. 또한 탄소물질의 첨가 시점을 LTO합성 전후로 나누어, 각각의 용량 및 수명특성의 효율을 비교해 보았다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.157-157
• /
• 2008

As the minimum feature size of semiconductor devices scales down to nano-scale regime, ultra shallow junction is highly necessary to suppress short channel effect. At the same time, Ni-silicide has attracted a lot of attention because silicide can improve device performance by reducing the parasitic resistance of source/drain region. Recently, further improvement of device performance by reducing silicide to source/drain region or tuning the work function of silicide closer to the band edge has been studied extensively. Rare earth elements, such as Er and Yb, and Pd or Pt elements are interesting for n-type and p-type devices, respectively, because work function of those materials is closer to the conduction and valance band, respectively. In this paper, we increased the work function between Ni-silicide and source/drain by using Pd stacked structure (Pd/Ni/TiN) for high performance PMOSFET. We demonstrated that it is possible to control the barrier height of Ni-silicide by adjusting the thickness of Pd layer. Therefore, the Ni-silicide using the Pd stacked structure could be applied for high performance PMOSFET.

• 한국전기전자재료학회논문지
• /
• 제26권2호
• /
• pp.98-103
• /
• 2013

The alumina substrates that Ni electrode was printed on and the multi-layered PTCR thermistors of which composition is $(Ba_{0.998}Ce_{0.002})TiO_3+0.001MnCO_3+0.05BN$ were fabricated by a thick film process, and the effect of re-oxidation temperature on their resistivities and resistance jumps were investigated, respectively. Ni electroded alumina substrate and the multi-layered PTC thermistor were sintered at $1150^{\circ}C$ for 2 h under $PO_2=10^{-6}$ Pa and then re-oxidized at $600{\sim}850^{\circ}C$ for 20 min. With increasing the re-oxidation temperature, the room temperature resistivity increased and the resistance jump ($LogR_{290}/R_{25}$) decreased, which seems to be related to the oxidation of Ni electrode. The small sized chip PTC thermistor such as 2012 and 3216 exhibits a nonlinear and rectifying behavior in I-V curve but the large sized chip PTC thermistor such as 4532 and 6532 shows a linear and ohmic behavior. Also, the small sized chip PTC thermistor such as 2012 and 3216 is more dependent on the re-oxidation temperature and easy to be oxidized in comparison with the large sized chip PTC thermistor such as 4532 and 6532. So, the re-oxidation conditions of chip PTC thermistor may be determined by considering the chip size.

• 한국전기전자재료학회논문지
• /
• 제26권2호
• /
• pp.164-169
• /
• 2013

The effect of co-sputtering condition on the structural properties of $Mg_xZn_{1-x}O$ thin films grown by RF magnetron co-sputtering system was investigated for manufacturing UV LED. $Mg_xZn_{1-x}O$ thin films were grown with ZnO and MgO target varying RF power. Structural properties were investigated by X-ray diffraction (XRD) and Energy dispersive spectroscopy (EDS). The $Mg_xZn_{1-x}O$ thin films have sufficient crystallinity on the high ZnO power. The EDS analyzed showed that the Mg content in the $Mg_xZn_{1-x}O$ films decreased from 3.99 to 24.27 at.% as the RF power of ZnO target increased. The Mg content in the $Mg_xZn_{1-x}O$ films could be controlled by co-sputtering power.

• 마이크로전자및패키징학회지
• /
• 제15권2호
• /
• pp.29-36
• /
• 2008

본 연구에서는 MEMS 소자의 직접화 및 소형화에 필수적인 through-wafer via interconnect의 신뢰성 문제를 연구하였다. 이를 위하여 Au-Sn eutectic 접합 기술을 이용하여 밀봉(hermetic) 접합을 한 웨이퍼 레벨 MEMS 패키지 소자를 개발하였으며, 전기도금법을 이용하여 수직 through-hole via 내부를 구리로 충전함으로써 전기적 연결을 시도하였다. 제작된 MEMS 패키지의 크기는 $1mm{\times}1mm{\times}700{\mu}m$이었다. 제작된 MEMS패키지의 신뢰성 수행 결과 비아 홀(via hole)주변의 크랙 발생으로 패키지의 파손이 발생하였다. 구리 through-via의 기계적 신뢰성에 영향을 줄 수 있는 여러 인자들에 대해서 수치적 해석 및 실험적인 연구를 수행하였다. 분석 결과 via hole의 크랙을 발생시킬 수 있는 파괴 인자로서 열팽창 계수의 차이, 비아 홀의 형상, 구리 확산 현상 등이 있었다. 궁극적으로 구리 확산을 방지하고, 전기도금 공정의 접합력을 향상시킬 수 있는 새로운 공정 방식을 적용함으로써 비아 홀 크랙으로 인한 패키지의 파괴를 개선할 수 있었다.

• Journal of Electrochemical Science and Technology
• /
• 제4권3호
• /
• pp.113-118
• /
• 2013

Fluorophosphate, $Na_2MnPO_4F$ as new cathode material was synthesized by carbothermal treatment method. Prepared $Na_2MnPO_4F$ has particle size under 100 nm and residual carbon exists in surface of $Na_2MnPO_4F$. Additional carbon coating was performed in order to increase the electrochemical properties. Even capacity and overpotential were improved by carbon coating using mechanical ball milling, the reduced crystallinity limited the drastic improvement of the electrochemical properties. To solve this problem, re-heat treatment was involved to recover crystallinity and then notable improvement of electrochemical properties was obtained. Specific amount of $Li^+$ that participates in electrochemical $Li^+$ insertion / extraction reaction, was x = 1 in $Li_xNa_{2-x}MnPO_4F$ within the voltage range of 2.0 to 4.8 V. The doubled capacity by 2 electron reaction can be obtained when NMPF is charged to higher voltage over 4.8 V.