• Journal of the Mineralogical Society of Korea
• /
• v.31 no.4
• /
• pp.307-323
• /
• 2018

The Inseong Au-Ag and base metal deposit, located in Chungchengbuk-do, Korea, consists of series of quartz veins filling fissures. The deposit occurs in Hwanggangri meta-sediment formation, a lime pebble-bearing phyllite, in the Okcheon Supergroup. Abundant ore minerals in the deposit are pyrite, arsenopyrite, sphalerite, chalcopyrite and galena. The gangue minerals are quartz, calcite and chlorite. Hydrothermal alteration such as chlorization, silicitication, sericitization and carbonitization can be observed around the quartz veins. 4 vein stages can be distinguished based on its paragenetic sequence, vein structure, alteration features and ore minerals. Microthermometry of the fluid inclusion assemblages occur in the veins are conducted to reconstruct a hydrothermal P-T evolution. Fluid inclusions in clean and barren quartz vein in stage 1 have Th of $270{\sim}342^{\circ}C$ and salinity of 1.7~6.4 (NaCl eqiv.) wt%. Euhedral quartz crystal in stage 2 have Th of $108{\sim}350^{\circ}C$ and salinity of 0.5~7.5 wt%. Barren milky quartz vein in stage 3 have Th of $174{\sim}380^{\circ}C$ and salinity of 0.8~7.5 wt%. Calcite vein in stage 4 have Th of $103{\sim}265^{\circ}C$ and salinity of 0.7~6.4 wt%. Calculated paleodepth about 0.5~1.5 km (hydrostatic pressure) indicate epithermal ore-forming condition. Shallow depth but relatively high-T hydrothermal fluids possibly create a steep geothermal gradient, sufficient for base metal precipitation in the Inseong deposit.

• Korean Journal of Soil Science and Fertilizer
• /
• v.31 no.2
• /
• pp.189-196
• /
• 1998

Swage sludge cakes produced from domestic wastewater treatment plants were collected from 21 different sites throughout Korea, and chemical properties of the sludge samples were determined. Inorganic nutrient contents did not indicate great differences among swage sludges from each sites, whereas the toxic heavy metal contents differed greatly. T-N, $NH_4{^+}-N$ and $NO_3{^-}-N$ contents from 21 sites sludges ranged 2.3-6.0, 291-4284, $1.4-58.8mg\;kg^{-1}$, respectively. Heavy metal (Cd, Cu, Pb and Zn) contents ranged 2.86-58.22, 144.0-5417.3, N.D.-943.5, and $N.D.-8,083mg\;kg^{-1}$, respectively. One of the sludges was treated to soils at rates of 12.5, 25, 50. and 100, $Mg\;ha^{-1}$ and incubated for 12 weeks to determine nitrogen materialization rate. Ammoniun nitrogen content decreased sharply at higher rates of sludge treatment up to 8 weeks after treatment and did not change much, while $NO_3{^-}$ increased at all treatment levels. The net amount of mineralized N of sludge treatment rates (12.5, 25, 50, and $100Mg\;ha^{-1}$) during 12weeks incubation were 189.0, 277.2, 303.8 and $376.6mg\;kg^{-1}$.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.10 no.1
• /
• pp.27-36
• /
• 2012

Metal chloride waste is generated as a main waste streams in a series of electrolytic processes of a pyrochemical process. Different from carbonate or nitrate salt, metal chloride is not decomposed into oxide and chlorine but it is just vaporized. Also, it has low compatibility with conventional silicate glasses. Our research group adapted the dechlorination approach for the immobilization of waste salt. In this study, the composition of SAP ($SiO_2-Al_2O_3-P_2O_5$) was adjusted to enhance the reactivity and to simplify the solidification process as a subsequent research. The addition of $Fe_2O_3$ into the basic SAP decreased the SAP/Salt ratio in weight from 3 for SAP 1071 to 2.25 for M-SAP( Fe=0.1). The experimental results indicated that the addition of $Fe_2O_3$ increased the reactivity of M-SAP with LiCl-KCl but the reactivity gradually decreased above Fe=0.1. Also, introducing $B_2O_3$ into M-SAP requires no glass binder for the consolidation of reaction products. U-SAP ($SiO_2-Al_2O_3-Fe_2O_3-P_2O_5-B_2O_3$) could effectively dechlorinate the LiCl-KCl waste and its reaction product could be consolidated as a monolithic form without a glass binder. The leaching test result indicated that U-SAP 1071 was more durable than other SAPs wasteform. By using U-SAP, 1 g of waste salt could generated 3~4 g of wasteform for final disposal. The final volume would be about 3~4 times lower than the glass-bonded sodalite. From these results, it could be concluded that the dechlorination approach using U-SAP would be one of prospective methods to manage the volatile waste salt.

• Economic and Environmental Geology
• /
• v.29 no.1
• /
• pp.65-75
• /
• 1996

Sulfate reduction and the precipitation of metal sulfides may have great potential to improve water quality of mine effluents in wetland treatment systems. Laboratory experiments using sulfate reducing bacteria (SRB) and limestone to treat effluents from the abandoned Dalsung tungsten-copper mine show that encouraging results, that have been attributed to sulfate reduction. Fe, Al, Cd, Cu and Zn are reduced to below detection limits with $99{\sim}100%$ metal removal rates, Mn is reduced by at least 90% to below 8.0 mg/l, and the pH is raised from 5.12 to 7.60 after 53 days of experiments. In the staged design, laboratory experiments are initiated to determine what would be reasonable substrate materials for remediation of the mine effluents. A substrate mixture containing 70% oak compost and 30% mushroom compost maintains $0.03{\sim}0.04mM$ of lactate, which provides good condition for the SRB granule. A downflow SRB wetland system is proposed as follows : 1) The lower part of the treatment system consists with a 25 cm thick layer of high quality (above 95% of $CaCO_3$) of limestone; 2) The geotextile (geonet) is recommended to be spread on the limestone bed to prevent clogging the limestones with the substrates; 3) The mixture of substrates with 70% oak and 30% spent mushroom composts, and SRB granules overlain on top of the geonet with 25 cm height. The sizes of the passive treatment systems are calculated according to metal loading and permeability criteria : 1) $220m^3$ ($15{\times}15{\times}1m$) for -1 level effluents; 2) $28m^3$ ($5.3{\times}5.3{\times}1m$) for -2 level; and 3) $2700m^3$ ($52{\times}52{\times}1m$) for the -3 level. The -3 level system needs to be broken down into 5 to 15 cells.

• Journal of Preventive Medicine and Public Health
• /
• v.26 no.1 s.41
• /
• pp.110-125
• /
• 1993

This study was designed to determine whether non-violent criminal and normal control on the basis of concentration of levels of trace mineral and toxic metal by analysis of human scalp hair. The subjects were selected 87 nonviolent criminal from a prison population and 120 normal control from periodic health checks for study. Hair samples were taken from the napes and Minnesota Multiple Personality Inventory (MMPI) was performed also. Five trace mineral (Zn, Cu, Mg, Fe, Na) and two toxic metal (lead, cadmium) contents were determined by an atomic absorption spectrometer. The contents of zinc and magnesium in hair of non-violent criminal were significantly lower than the control group (p<0.01). In the case of lead and cadimum, mean value of criminal group was significantly higher than control group. Significantly higher T-score of MMPI was seen in non-violent criminal group fur psychopathic deviate (Pd), paranoia scale (Pa), and Mania scale (Ma) than control group, but T-score of depression scale (D) was significantly higher in the control group. In the non-violent criminal group, the content of copper inversely proportion to T-score of Hs, D, Hy, Pd, Mf, Pa, Pt, Sc, Si except Ma, also Zinc inversely proportion to T-score of Hy, Mf, Pa, Pt. These results suggest that difference of some hair mineral contents exist between criminal and normal control group. Thus further studies are necessary to determine whether violent and nonviolent criminal group attributed biochemical imbalance with carefully constructed and controlled studies.

• Applied Biological Chemistry
• /
• v.45 no.2
• /
• pp.92-96
• /
• 2002

Present contamination levels of soils along the major roadsides of Seoul, Korea were investigated, and base-line data were accumulated for future use. Topsoil $(1{\sim}5$ cm) and subsoil $(20{\sim}50$ cm) from five districts (Gangdong-, Gwangjin-, Nowon-, Seodaemun- and Seongdong-gu) were sampled. The collected samples were airdried, passed through 2-mm sieves, and analyzed to determine the physicochemical properties including pH, EC, CEC, exchangeable cations (Ca, Mg, K, and Na), and heavy metal contents (Cd, Cu, Pb, and Zn). Soil textures of topsoils and subsoils were mainly loamy sand and sandy loam, respectively. The range of pH was $4.5{\sim}10$.0 with an average of 7.5 for both topsoil and subsoil, which is much higher than that of the forest soils in Seoul. The ranges of 0.1 N HCI extractable Cd, Cu, Pb, and Zn contents for both topsoils and subsoils were $0.0l{\sim}l.19$, N.D. (not $detected){\sim}228$.99, $N.D.{\sim}352$.54, and $2.97{\sim}332$.96 mg $kg^{-1}$, respectively. Most of the average heavy metal contents were lower than the concern level of the Soil Environment Conservation Act of Korea, but were much higher than those of the , forest soils in Seoul. Some sites were higher in heavy metal contents than the concern levels; in particular, the average Cu content in Seongdong-gu was much higher than the concern level, 50 mg $kg^{-1}$. Careful management of the soil to prevent the aggravation of the present contamination level and the dissemination of contamination is highly recommended.

• Journal of the Korean Vacuum Society
• /
• v.21 no.3
• /
• pp.142-150
• /
• 2012

In this Study, Mo back electrode were deposited as the functions of various working pressure, deposition time and plasma per-treatment on sodalime glass (SLG) for application to CIGS thin film solar cell using by DC sputtering method, and were analyzed Mo change to $MoSe_2$ layer through selenization processes. And finally Mo back electrode characteristics were evaluated as application to CIGS device after Al/AZO/ZnO/CdS/CIGS/Mo/SLG fabrication. Mo films fabricated as a function of the working pressure from 1.3 to 4.9mTorr are that physical thickness changed to increase from 1.24 to 1.27 ${\mu}m$ and electrical characteristics of sheet resistance changed to increase from 0.195 to 0.242 ${\Omega}/sq$ as according to the higher working pressure. We could find out that Mo film have more dense in lower working pressure because positive Ar ions have higher energy in lower pressure when ions impact to Mo target, and have dominated (100) columnar structure without working pressure. Also Mo films fabricated as a function of the deposition time are that physical thickness changed to increase from 0.15 to 1.24 ${\mu}m$ and electrical characteristics of sheet resistance changed to decrease from 2.75 to 0.195 ${\Omega}/sq$ as according to the increasing of deposition time. This is reasonable because more thick metal film have better electrical characteristics. We investigated Mo change to $MoSe_2$ layer through selenization processes after Se/Mo/SLG fabrication as a function of the selenization time from 5 to 40 minutes. $MoSe_2$ thickness were changed to increase as according to the increasing of selenization time. We could find out that we have to control $MoSe_2$ thickness to get ohmic contact characteristics as controlling of proper selenization time. And we fabricated and evaluated CIGS thin film solar cell device as Al/AZO/ZnO/CdS/CIGS/Mo/SLG structures depend on Mo thickness 1.2 ${\mu}m$ and 0.6 ${\mu}m$. The efficiency of CIGS device with 0.6 ${\mu}m$ Mo thickness is batter as 9.46% because Na ion of SLG can move to CIGS layer more faster through thin Mo layer. The adhesion characteristics of Mo back electrode on SLG were improved better as plasma pre-treatment on SLG substrate before Mo deposition. And we could expect better efficiency of CIGS thin film solar cell as controlling of Mo thickness and $MoSe_2$ thickness depend on Na effect and selenization time.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.7
• /
• pp.1115-1124
• /
• 2013

The present study was conducted to ensure the diversity of domestic solar salt by analyzing the composition and microbiological characteristics of solar salt (from Docho island: DS) and the flower of salt produced in different Korean salt flats (Sinui island: SF, Bigum island: BF, and Docho island: DF). The analyses showed that the moisture content of the three types of flower of salt and solar salt ranged from 10.54~13.82% and NaCl content ranged from 78.81~84.61%. The mineral content of those salts ranged from 3.57~5.51%. The content of insoluble matter in these salts was $0.01{\pm}0.00{\sim}0.05{\pm}0.00%$. The sand content of these salts was $0.01{\pm}0.01{\sim}0.03{\pm}0.01%$. By Hunter's color value analysis, the color of the flower of salt was brighter and whiter than solar salt. The salinity of the flower of salt was a little higher than solar salt as well. The magnesium and potassium ion content of DF was $9,886.72{\pm}104.78mg/kg$ and $2,975.23{\pm}79.73mg/kg$, respectively, which was lower than the content in SF, BF, and DS. The heavy metal content of all salts was acceptable under the Korean Food Sanitation Law. The flower of salt was confirmed to be sweeter and preferable to solar salt. More than 80% of the solar salt crystals were 2~3 mm in size, whereas crystals from the flower of salt were 0.5~2 mm in size. The bacterial diversity of DF and DS were investigated by culture and denaturing gradient gel electrophoresis (DGGE) methods. The number of cultured bacteria in flower of salt was approximately three times more than solar salt. By DGGE analysis, major microbes of DF were Maritimibacter sp., Cupriavidus sp., and unculturable bacteria, and those of DS were Cupriavidus sp., Dunalidella salina and unculturable bacteria. The results of DGGE analysis showed that major microorganisms in solar salts were composed of unidentified and unculturable bacteria and only a few microorganisms were culturable.

• Analytical Science and Technology
• /
• v.28 no.3
• /
• pp.212-220
• /
• 2015

This study aims to identify the characteristics of phthalates (DMP, DEP, DBP, DEHA, BBP, DEHP, and DNOP) and heavy metals such as lead (Pb), cadmium (Cd), and mercury (Hg) in cosmetics and their containers. Phthalates and heavy metals may be endocrine distruptors. Sixty-five cosmetics were purchased from online and offline stores in Busan. This study developed a simultaneous method for the analysis of phthalates by GC-FID. The results showed that among the 65 cosmetics, DBP, DEHP, and DEP were detected at 20.0%, 7.7%, 1.5%, respectively. The amounts of DBP and DEHP detected in 18 samples were less than 100 μg/g, which satisfies the Regulations of Cosmetic Safety Standards in Korea. In order to detect phthalates in cosmetic containers, a dissolution test was conducted by extracting solutions, such as water, n-heptane, 20% ethanol, 50% ethanol and 4% acetic acid, which were prepared with different levels of pH, alcohol content, and fat content following the Korea Standards and Specifications for Utensils, Containers, and Packaging. The results showed that DMP, DBP, DEHA, BBP, DEHP, and DNOP were not detected, DEP was detected in plastics such as PE, PP, and others, when a 50% alcohol solvent was used. Phthalates may not be detected in cosmetic containers if they are not packaged with the above 20% alcohol constituent. We also analyzed the concentration of heavy metals, such as Pb, Cd, and Hg, by using ICP-OES and a mercury analyzer. The ranges of concentration were ND~2.71 μg/g for Pb, ND~0.31 μg/g for Cd, and ND~0.01 μg/g for Hg, which are below the regulated level.

• The Korean Journal of Pesticide Science
• /
• v.17 no.3
• /
• pp.206-212
• /
• 2013

This study was examined for activity of aggregation pheromone fish net trap with residual effect of insecticides against Riptortus pedestris. Time of escape was from aggregation pheromone fish net trap researched 49.74 min ($ET_{99}$) and 65.01 min ($ET_{99}$) with 1st and 2nd instar nymph respectively. Six insecticides for the stink bugs were treated to 3 different materials (wood, metal and plastic). Bifenthrin and fenitrothion were showed 100% insecticidal activity at 48 h to all developmental stage of R. pedestris. Residual effect of bifenthrin and fenitrothion on plastic material were showed 100% insecticidal activity over 15 day after treatment with 1st, 3rd instar nymphs and adults except 5th instar nymph. In field test using plastic material trap with two pesticides, 1st instar nymphs and adults were showed 100% mortality until 10 day after treatment. These results indicate that R. pedestris might be managed using aggregation pheromone trap with insecticides.