• ETRI Journal
• /
• 제22권1호
• /
• pp.1-11
• /
• 2000

The Satellite Operation System (SOS) has been developed for a low earth orbiting remote sensing satellite, Korea Multipurpose Satellite-I, to monitor and control the spacecraft as well as to perform the mission operation. SOS was designed to operate on UNIX in the HP workstations. In the design of SOS, flexibility, reliability, expandability and interoperability were the main objectives. In order to achieve these objectives, a CASE tool, a database management system, consultative committee for space data systems recommendation, and a real-time distributed processing middle-ware have been integrated into the system. A database driven structure was adopted as the baseline architecture for a generic machine-independent, mission specific database. Also a logical address based inter-process communication scheme was introduced for a distributed allocation of the network resources. Specifically, a hotstandby redundancy scheme was highlighted in the design seeking for higher system reliability and uninterrupted service required in a real-time fashion during the satellite passes. Through various tests, SOS had been verified its functional, performance, and inter-face requirements. Design, implementation, and testing of the SOS for KOMPSAT-I is presented in this paper.

• Journal of Advanced Marine Engineering and Technology
• /
• 제18권1호
• /
• pp.73-80
• /
• 1994

The water ejector is a low pressure high flow rate volumetric pump. It utilize the energy of a low mass flow, high velocity stream to induce a large mass flow, low velocity stream. In addition, it has a very good resistances to cavitation compared to the other type of pumps, and the maintenance cost is practically nil. There has been enormous energy loss to supply the upper part water of dam which has large potential energy as mere irrigation water in domestic multipurpose dam. The new type of energy saving system which developed through the present study can economizes over 950,000 kWh per year by mixing the upper part water of dam with the waste water by the large water ejector. This paper estimates the economical efficiency of the new type of irrigation water pumping system, and further more, represents the change of performance characteristics of large water ejector, which was adapted to this system, according to the fluctuation of upper water level that seasonally changes.

• 한국환경복원기술학회지
• /
• 제3권3호
• /
• pp.100-104
• /
• 2000

We have put considerable time and work to find a proper solution to restore the damaged natural environment due to Dam construction, and to restore the field around Dam on the basis of Environmentally Sound Sustainable Development(E.S.S.D). We've replaced the site which had been used as a equipment space with the natural-oriented park, have made a wildlife corridor for those animals which have been living in the area in a newly constructed road to in an out, and have introduced a streamside plant to organize green-space. We've received incredible favor from visitors and residents for the environment restoration. The natural-oriented park plays a role of giving the citizens to the pleasure and the comfort.

• 한국정보보호학회:학술대회논문집
• /
• 한국정보보호학회 2001년도 종합학술발표회논문집
• /
• pp.313-317
• /
• 2001

본 논문에서는 전자메일에 보안기능과 공중기능을 함께 부여하는 방법에 대해 기술하고 있다. MIME(Multipurpose Internet Mail Extensions)[8]에 대하여 메시지의 무결성과 전자서명 생성 및 검증, 메시지의 암호화 및 복호화, 부인방지 기능을 지원하기 위해S/MIME(Secure/Multipurpose Internet Mail Extensions)[1][2]을 적용하고 또한 문서에 대한 공증기능을 부여하기 위하여 서명 생성 후 오랜 기간 뒤에도 서명과 서명 생성 시 사용된 인증서의 유효성과 폐지여부를 검증 할 수 있도록 제 3 신뢰기관에 의해 발행된 Timestamp[7]를 적용하였다. 그리고 서명된 메일 형식에 receiptRequest[4] 식별자를 사용하여 수신자의 서명을 포함한 signed receipt[4]를 송신자에게 다시 보내게 하여 메일 수신여부를 검증 할 수 있도록 하였다.

• Restorative Dentistry and Endodontics
• /
• 제20권1호
• /
• pp.183-192
• /
• 1995

The purpose of this study was to evaluate the effect of smear layer management on the interfacial morphology between dentin bonding system and dentin. Clearfil New Bond, Scotchbond Multipurpose, Prisma Universal Bond 3 and X-R Bond were used on the cervical dentinal surfaces of bovine incisor teeth. All of the dentin bonding systems were labeled with fluorescene in primer and rhodamine B in adhesive. Specimens of 2~3mm thichness were prepared by longitudinal and labiolingual sectioning. The interface between dentin bonding system and dentin was observed by flouresence imaging with a confocal laser scanning microscope. Following results were obtained. 1. In the specimen of Clearfil New Bond, dentinal tubules were widened by destruction of peritubular dentin in the course of treatment with phosphoric acid of high concentration. 2. Hybrid layer was observed in the specimen of Scotchbond Multipurpose and X-R Bond. 3. In the specimen of Prisma Universal Bond 3, the penetraton of adhesive was not observed clearly.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2010년도 하계학술대회 논문집
• /
• pp.450-451
• /
• 2010

In this paper, the low-cost drive circuit of dc motor for a multipurpose small-size electric vehicle is developed. In order to change smoothly the rotating direction of dc motor for traction, the operating sequence of both the field current and the armature voltage according to the angle of a pedal of vehicle is suggested. The simulation study is carrier out to verify the proposed method, and the control system is implemented with 8-bit AVR.

• Composites Research
• /
• 제14권2호
• /
• pp.50-59
• /
• 2001

다목적헬리콥터용으로 설계된 복합재 무힌지 로터깃에 대하여 강도저하모델을 활용하여 비행모사 하중스펙트럼에 따라 피로파손 확률분포와 잔여강도 변화거동을 해석하여 피로수명을 예측하였다. 이때 작용하는 피로하중은 실제 헬리콥터 운용상태를 모사하는 무힌지 로터깃의 표준하중스펙트럼인 FELIX 데이터로부터 비행 대 비행 하중스펙트럼을 구성하였고 피로손상이 가장 극심하게 예상되는 깃뿌리 부근의 국부응력스펙트럼은 스킨과 스파의 적층구조해석을 수행함으로써 구하였다.

• 물과 미래
• /
• 제12권2호
• /
• pp.70-76
• /
• 1979

본 연구는 다목적댐 기본계획 입안에 있어서 노력과 시간을 가장 많이 소비하는 $\ulcorner$사업으로부터의 산출량 산정$\lrcorner$의 합리화를 연구대상으로 삼았다. 봉 논문에서 제안한 전산 program에 의하여 충주댐 최적계획 입안의 합리화를 이룩할 수 있었다. 본 방버은 충주댐과 유사한 타사업의 산출량산정에도 적용 가능하다.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2008년도 춘계학술발표대회 논문집
• /
• pp.303-307
• /
• 2008

For the recently constructing building, diverse forms of attempt are being applied with the environmental-friendly design and reflection of the design factor by environment simulation. Especially, in case of Multi-Purpose Hall, in view of its use-purpose and because of the characteristics that should be utilized as the multipurpose uses by well-mingled together with the lecture-wise factor and musical factor, now it could be said that the sufficient examination and planning with regard to the acoustic factor are essential. On such viewpoint, as the object of practically planning multipurpose auditorium, this Study has intended to design such auditorium equipped with the optimal architectural acoustic factor, for the acoustic condition using Acoustic Simulation Technique at the planning stage.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 춘계 학술논문 발표대회
• /
• pp.245-246
• /
• 2018

This paper is a multipurpose functional synthetic resin formwork which can replace existing euro form. We tried to improve the disadvantages such as work noise, stenosis, recyclability, and workability of Euroform system. As a result of the test, Euroform showed an average of 106.7dB and synthetic resin formwork showed an average of 100.4dB. Therefore, it is considered that the synthetic resin formwork has a great effect of noise reduction compared to the euro form.