• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.57-60
• /
• 2003

IEEE 802.16 Wireless MAN standard specifies the air interface of fixed point-to-multipoint broadband wireless access systems providing multiple service. Among the service classes supported by the wireless MAN, the BE class is ranked on the lowest position in priority and is usually deployed by multicast and broadcast polling MAC scheme. In provisioning such BE service, the delay performance is influenced by a number of components including restrictions on resource request per SS, the number of request opportunities in upward frame, scheduling requests at BS, and contention resolution method. As candidate components of MAC function for BE service, we propose single and multiple request schemes (for controling the number of requests per SS), exhaustive and limited request schemes (for regulating the amount of grant per request) and FCFS, H-SMF, pure SMF, SS-wise Round Robin, and pure Round Robin (for scheduling requests at BS). Then, we construct MAC schemes by combining the above components and evaluate the delay performance exhibited by each MAC scheme using a simulation method. From numerical results, we investigate the effect of MAC components on average delay and delay variation and observe the dissonance on collision reduction in a resource - limited environment.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.8
• /
• pp.1901-1907
• /
• 2015

Today's smartphones and user devices are equipped with multiple radio interfaces increasingly. Aggregating theses multiple radio interfaces and using them concurrently will increase a user's communication speed immediately, but at the expense of increased power consumption. In this paper, we develop a mathematical performance model of an adaptive radio activation scheme by which a radio interface is activated only when needed for performance increase and deactivated otherwise. The developed model shows that the adaptive scheme reduces delay significantly and almost halves power consumption below a certain level of traffic input.

• Water Engineering Research
• /
• v.6 no.2
• /
• pp.39-48
• /
• 2005

The Brazos River is one of the longest rivers contained entirely in the state of Texas, flowing over 700 miles from northwest Texas to the Gulf of Mexico. Today, the Brazos River Authority and Texas Commission on Environmental Quality interest in drought protection plan, waterpower project, and allowing the appropriation of water system-wide and water right within the Brazos River Basin to meet water needs of customers like farmers and local civilians in the future. Especially, this purpose of this paper primarily intended to provide the data for the engineering guidelines and make easily geological mapping tool. In the Brazos River basin, many stream-flow gage station sites are not working, and they can not provide stream-flow data sets enough for development of the Probable Maximum Flood (PMF) for use in the evaluation of proposed and existing dams and other impounding structures. Integrated GIS-Spatial Interpolation (GIS-SI) tool are composed of two parts; (1) extended GIS technique (new making interface for hydrological regionalization parameters plus classical GIS mapping skills), (2) Spatial Interpolation technique using weighting factors from kriging method. They are obtained from the relationship among location and elevation of geological watershed and existing stream-flow datasets. GIS-SI technique is easily used to compute parameters which get drainage areas, mean daily/monthly/annual precipitation, and weighted values. Also, they are independent variables of multiple linear regressions for simulation at un gaged stream-flow sites. In this study, GIS-SI technique is applied to the Brazos river basin in Texas. By assuming the ungaged flow at the sites of Palo Pinto, Bryan and Needville, the simulated daily/monthly/annual time series are compared with observed time series. The simulated daily/monthly/annual time series are highly correlated with and well fitted to the observed times series.

• Journal of Sensor Science and Technology
• /
• v.5 no.1
• /
• pp.43-50
• /
• 1996

This paper presents a manufacture of the multiple subjects biotelemetry system using custom CMOS IC fabricated $1.5{\mu}m$ n-well process technology. The implantable circuits of the system except sensor interface circuits including FM transmitter are fabricated on a single chip with the sire of $4{\times}4mm^{2}$. It is possible to assemble the implantable system in a hybrid package as small as $3{\times}3{\times}2.5cm$ by using this chip, It's main function is to enable continuous measurement simultaneously up to 7-channel physiological signals from the selected one among 8 subjects. Another features of this system are to enable continuous measurement of physiological signals, and to accomplish ON/OFF switching of an implanted battery by subject selection signal with command signal from the external circuit. If this system is coupled with another appropriate sensors in medical field, various physiological parameters such as pressure, pH and temperature are to be measured effectively in the near future.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.3
• /
• pp.713-720
• /
• 1996

In recent, the demand of mobile communication system is increasing rapidly. However, since wireless resources is limitted, the protocol to utilize wireless resource efficiently is needed. Up to now, Slotted CDMA_ALOHA(S_CDMA_ALOHA) and Mini-Slotted CDMA_ALOHA(MS_CDMA_ALOHA) methods are proposed as a CDMA_ALOHA mechanism, and it is turned out that MS_CDMA_ALOHA offers betterperformance than S_CDMA_ALOHA mechanism. Also, IS-95 multiple access mechanism has been proposed as common air interface(CAI) protocol of CDMA digital cellular system. However, in former study, the performance evaluations were made without considertion of chnnel characteristics of wireless communication environment. In this paper, a new access mechanism for improring the performance in the DS/CDMA digital cellular environment is suggested. This mechanism is adaptive to the channel condition and based on the conventional MS_CDMA_ALOHA mechanism. Also, the performance of new access mechanism is compared with that of conventional mechanisms, through computer simulation. According tot h simulation results, it is shown that the proposed NA_CDMA_ALOHA(Noise-Adaptation CDMA_ALOHA) mechanism offers better performance than conventional three CDMA_ALOHA mechanisms in view of mean delay time and system throughput characteristics. This phenomenon is due to the fast that NA_CDMA_ALOHA mechanism controls the access attempts efficiently based on the channel condition in heavy traffic environments.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.9
• /
• pp.861-869
• /
• 2014

This paper shows the research of a platform architecture relates to the LTE-based macro basestation; the proposed platform architecture is designed with the interface between the baseband signal and IF (Intermediate Frequency) per codeword. Using this method, we can smoothly transmit/receive a large amounts of data regardless of the number of antenna in a macro base station which is used technology such as massive MIMO. In this paper, We analyzed the evolution of LTE technology and the trend in the development of the LTE-based system. For validation of the proposed architecture, we compare the general architecture of a conventional with the proposed architecture. From the calculation results of transmission quantity data, we see that the proposed architecture can give better performance than the existing architecture. By presenting this architecture, we hope to provide a new foundation for Design and Implementation of a LTE base station platform which is used technology such as massive MIMO, carrier aggregation (CA), coordinated multi point (CoMP).

• Journal of Institute of Control, Robotics and Systems
• /
• v.11 no.10
• /
• pp.851-856
• /
• 2005

The DNA and protein data of diverse species have been daily discovered and deposited in the public archives according to each established format. Database systems in the public archives provide not only an easy-to-use, flexible interface to the public, but also in silico analysis tools of unidentified sequence data. Of such in silico analysis tools, multiple sequence alignment [1] methods relying on pairwise alignment and Smith-Waterman algorithm [2] enable us to identify unknown DNA, protein sequences or phylogenetic relation among several species. However, in the existing multiple alignment method as the number of sequences increases, the runtime increases exponentially. In order to remedy this problem, we adopted a parallel processing suffix tree algorithm that is able to search for common subsequences at one time without pairwise alignment. Also, the cross-matching subsequences triggering inexact-matching among the searched common subsequences might be produced. So, the cross-matching masking process was suggested in this paper. To identify the function of the clusters generated by suffix tree clustering, BLAST was combined with a clustering tool. Our clustering and annotating tool is summarized as the following steps: (1) construction of suffix tree; (2) masking of cross-matching pairs; (3) clustering of gene sequences and (4) annotating gene clusters by BLAST search. The system was successfully evaluated with 22 gene sequences in the pyrubate pathway of bacteria, clustering 7 clusters and finding out representative common subsequences of each cluster

• Journal of KIISE:Information Networking
• /
• v.36 no.3
• /
• pp.163-172
• /
• 2009

Various terminals equipped with multiple interfaces may receive services from wireless networks when they pass through the overlaid heterogeneous networks, and thus the vertical handovers across the wireless networks increases, which will become a big problem in the network resource management. This problem can be efficiently solved by common radio resource management (CRRM). In this paper, we propose two operation algorithms based on network selection jointly with vertical handover as the key CRRM strategies. When a new user tries to get services, the CRRM can choose the best target network according to the proposed Integrated Network Selection Algorithm. When the network cannot satisfy the request from the new users, the proposed Integrated Vertical Handover Algorithm moves existing users to neighborhood networks to accommodate new users. The performance of the proposed algorithms has been validated through extensive simulations.

• Smart Structures and Systems
• /
• v.2 no.2
• /
• pp.115-126
• /
• 2006

The Terra-Scope system is an affordable 4-D down-hole seismic monitoring system based on independent, microprocessor-controlled sensor Pods. The Pods are nominally 50 mm in diameter, and about 120 mm long. They are expected to cost approximately $6000 each. An internal 16-bit, extremely low power MCU controls all aspects of instrumentation, eight programmable gain amplifiers, and local signal storage. Each Pod measures 3-D acceleration, tilt, azimuth, temperature, and other parametric variables such as pore water pressure and pH. Each Pod communicates over a standard digital bus (RS-485) through a completely web-based GUI interface, and has a power consumption of less than 400 mW. Three-dimensional acceleration is measured by pure digital force-balance MEMS-based accelerometers. These accelerometers have a dynamic range of more than 115 dB and a frequency response from DC to 1000 Hz with a noise floor of less than $30ng_{rms}/{\surd}Hz$. Accelerations above 0.2 g are measured by a second set of MEMS-based accelerometers, giving a full 160 dB dynamic range. This paper describes the system design and the cooperative shared-time scheduler implemented for this project. Restraints accounted for include multiple data streams, integration of multiple free agents, interaction with the asynchronous world, and hardened time stamping of accelerometer data. The prototype of the device is currently undergoing evaluation. The first array will be installed in the spring of 2006.

• Journal of Convergence for Information Technology
• /
• v.9 no.7
• /
• pp.1-7
• /
• 2019

With the recent commercialization of the next generation of wireless 5G in everyday life, many changes have been made to organizations, industries and businesses of various sizes in various fields. However, although the improved speed and latency of 5G has improved, improvements in encryption, authentication and privacy are still required. In this paper, multiple groups of information management techniques are proposed to efficiently protect users' privacy in the heterogeneous environment of 5G. The proposed technique aims to allow distributed management of users' privacy links by clouding the privacy information generated by different heterogeneous devices to efficiently interface with different groups. Suggestion techniques process user-specific privacy information independently in a virtual space so that users can periodically synchronize their privacy information.