• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.1002-1003
• /
• 2006

Power line communication: PLC which easy to install at anywhere near outlet for electric machine. PLC uses transmission line for voltage of which is 60 Hz. One of the important thing is the processes of adding signal to power line and extracting the signal from power line, another is to choose the strong modulation method which sends signals to long distance without loosing in PLC channel. but PLC channel have very high and variable noise and attenuation and then it is very hard to transmit optimally between the transmitter and the receiver. AWGN, impulse noise and attenuation are created. To overcome the noise and attenuation. Multi-carrier Modulation methods like as OFDM and DMT which divide the channel into many sub-channel are powerful communication methods for PLC. In this paper, PLC channels are simulated for getting BER by Matlab simulink

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.1928-1931
• /
• 2002

Orthogonal Frequency Division Multiplexing or OFDM is a form of multi-carrier modulation technique. High spectral efficiency, robustness to channel fading, immunity to impulse interference, uniform average spectral density, capability of handling very strong echoes and less on linear distortion are among the favorite properties of OFDM. Even though there are many advantages of OFDM, t has two main drawbacks: high Peak to Average Power Ratio (PAPR) and frequency of offset. In this paper, the issue of PAPR in OFDM is discussed. A new algorithm is proposed to reduce PAPR by selecting the input sequences property using a lookup table.

• Proceedings of the IEEK Conference
• /
• 2003.11c
• /
• pp.113-116
• /
• 2003

In this paper, we propose a dynamic parallel channel allocation mechanism that dynamically controls total number of allocation channels of each subscriber to effectively service user bandwidth demands while high utilization and fairness are guaranteed in WDM based optical access networks. The logical performance gain of statistical multiplexing by dynamic channel allocation is validated with analytic method as well as simulations. We also introduce the adaptive padding scheme in order to efficiently distribute forwarded frames to aggregated multi-link channels which are formed by parallel channel allocation mechanism. The proposed scheme shows the performance enhancement by minimizing unnecessary padding size and the processing time.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.10a
• /
• pp.341-346
• /
• 2002

The production part requiring multiple processes such as piecing, blanking and notching are performed with a high production rates in progressive die. In order to prevent the defects of process result, the optimum of strip process layout design, die design, die making, and tryout with inspection etc. are needed. According to these factors of die development process, they required theory and practice of metal working process and its background, die structure, machining conditions for die making, die materials, heat treatment of die components, know-how and so on. In this study, we designed and analyzed die components also simulated the strip process layout of multiple stage drawing by DEFORM. Especially the result of tryout and its analysis become to the feature of this study.

• Journal of Communications and Networks
• /
• v.7 no.1
• /
• pp.13-20
• /
• 2005

In this paper, a new multi carrier, direct sequence code division multiple access (MC-DS-CDMA) system is proposed. Our new signal construction is based on convolutional encoding of the transmitted data, serial-to-parallel (S/P) conversion of the encoded data, Walsh-Hadamard-transformation (WHT), a second S/P conversion of the WHT outputs, spread spectrum (SS) modulation with a common pseudo-noise (PN) sequence, and then multicarrier transmission. The system bit error rate (BER) performance in frequency selective fading channel in the presence of additive white Gaussian noise (AWGN) and a jamming tone is analyzed and simulated. The numerical results are compared with those from an orthogonal MC-DS-CDMA system of Sourour and Nakagawa [7]. It is shown that the two systems have almost the same BER performance, but the proposed scheme has better anti-jamming ability.

• Journal of Communications and Networks
• /
• v.9 no.2
• /
• pp.192-197
• /
• 2007

We analyze the performance of code division multiple access (CDMA) system with multicarrier (MC) that employs precoding in synchronous downlink channels. Even though considerable efforts are undergoing for frequency offset estimation and correction, it is inevitable for the system to bear the remaining frequency offset. Therefore it is important to predict accurately the system performance in the presence of the residual frequency offset. We obtain the bit error rate (BER) performance in terms of the number of users, the spreading factor, the number of sub-carriers, and frequency offset. We assume that the spreading factor is equal to the number of sub-carriers, although we can generalize the case. The simulation results show that the BER of MC-CDMA with precoding shows a performance that varies with frequency offset as well as system loading.

• Proceedings of the KIEE Conference
• /
• 2008.11b
• /
• pp.89-91
• /
• 2008

Organic EL has been expected to adopt to a new styles of technology that make flat display after Tang & Vanslyke made good electric luminescence device in late 1980s. Their studies based on multi layer structure that consists of emitting layer and carrier transporting layer using proper organic material. But oxidization of organic layer by ITO, energy walls in both pole interface, contaminations of ITO surface, importance of protecting membrane, diffusive dimming of light to cathode organic layer, these causes of degradations are common facts of a macromolecule and micro molecule. We think these degradation caused by the impact of heat and electro-chemical factor, bulk effect and interface phenomenon, and raise a question.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.53 no.3
• /
• pp.188-196
• /
• 2004

Amplifier linearity plays a major role in the quality of mordern communication systems. The Power amplifier should be operated near saturation region to achieve high efficiency But at this region amplitude and phase distortions of the amplifier remarkably increase with the input power increase and cause a significant adjacent channel interference. In this paper, an independently controllable AM/AM and AM/PM predistortion linearizers consisted of two bias feed resistance linearizers is proposed. This linearizer allows independent adjustment of the AM/AM and AM/PM curves by using two adjustable voltages to compensate tile power amplifier non-linearities. The predistortion linearizer can improve the ACPR by 5.3dB with cdma2000 multi carrier signals. And by applying this linearizer to two-tone(880MHz) power amplifier, third order IMD products are improved up to 8(dB).

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2690-2692
• /
• 2003

Amplifier linearity plays a major role in the design of mordern communication systems. An independently controllable AM/AM and AM/PM predistortion linearizers that consists of two bias feed resistance linearizers is proposed. This linearizer allows independent adjustment of the AM/AM and AM/PM curves by using two adjustable voltages to compensate the power amplifier non-linearities. The predistortion linearizer can improve the ACPR by SdB with cdma2000 multi carrier signals. By applying this linearizer to two-tone 880MHz power amplifier, an improvement of adjacent channel leakage power up to 5dBm has been achieved.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05a
• /
• pp.20-23
• /
• 2004

In non-selective frequency environment, it is difficult to take the advantage of path diversity. In the literature, some methods have been proposed to solve the issue. This paper presents a new method to obtain the resolvable path in Indoor Multi-carrier Code Division Multiple Access (MC-CDMA) system by using downlink beam forming. With the aid of downlink beamforming, the most reliable path is found and chosen for the communication link. The new approach is evaluated in term of bit error rate (BER) and power consumption. The simulation results show that the new approach can get better BER performance. However, the cost of BER improvement is a small degradation in power reservation.