• Proceedings of the Korean Society of Laser Processing Conference
• /
• 2001.11a
• /
• pp.43-47
• /
• 2001

This paper presents a study of the uniform metal droplet generation using laser. The theoretical model, based on the variational principle instead of solving the Wavier-Stokes equation with moving boundaries, is developed. Our model is considered the Young-Laplace equation and force equilibrium conditions. Surface tension coefficient is determined under the statical condition with induced differential equation by using experimental result. In case of dynamic vibration, metal droplet shape and critical detaching volume are predicted by recalculating of proposed model. The simulation result revealed that the developed model could reasonably describe the molten metal droplet behavior on vibration with metal wire.

• Transactions of the Society of Information Storage Systems
• /
• v.5 no.1
• /
• pp.8-13
• /
• 2009

In this study, to compensate trembling of camera caused by vibration of user's hand, 2-axis voice coil actuator of optical image stabilizer (OIS) is suggested. In consideration of actuating performance, volume of OIS and application of hall sensor, one of concept models is selected and it is optimized to maximize the actuating performance. Two types of mechanisms that have the feasibility of moving in 2-axis and the capability of including the optimized EM circuit are proposed. Finally both types are fabricated and then actuating performance of OIS actuator and behavior of hall sensor are verified through the experiment.

• Journal of The Korean Astronomical Society
• /
• v.34 no.4
• /
• pp.237-241
• /
• 2001

Our goal is to present a simple volume-of-fluid type interface-tracking algorithm to compressible two-phase flow in two space dimensions. The algorithm uses a uniform underlying Cartesian grid with some cells cut by the tracked interfaces into two subcells. A volume-moving procedure that consists of two basic steps: (1) the update of volume fractions in each grid cell at the end of the time step, and (2) the reconstruction of interfaces from discrete set of volume fractions, is employed to follow the dynamical behavior of the interface motion. As in the previous work with a surface-tracking procedure for general front tracking (LeVeque & Shyue 1995, 1996), a high resolution finite volume method is then applied on the resulting slightly nonuniform grid to update all the cell values, while the stability of the method is maintained by using a large time step wave propagation approach even in the presence of small cells and the use of a time step with respect to the uniform grid cells. A sample preliminary numerical result for an underwater explosion problem is shown to demonstrate the feasibility of the algorithm for practical problems.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.4 no.4
• /
• pp.117-123
• /
• 2000

열차와 교량의 3차원 모델링을 사용한 고속철도 교량의 동적해석이 수행되었다. 철도교의 모델인은 판요소와 3차원 뼈대요소로 모델링되었다. 상판과 주형 사이의 offset은 기하학적인 구속조건을 사용하여 고려하였다. 본 연구에서 사용된 고속철도는 2량의 동력차와 2량의 모터차와 16량의 객차로 구성되어 있다. 관절형 대차로 연결되어 전체 열차계의 운동방정식은 Lagrange 방정식을 이용하여 유도되었으며, 차제와 대차 그리고 자축의 3차원인 운동을 고려하였다. 이동 열차에 의한 교량의 응답은 predictor-corrector 반복법에 의한 Newmark-$\beta$ 법에 의해서 그 해가 구해진다. 매개변수해석에 의해서 열차의 이상화방법, 열차의 제동, 철도교량의 주행면 조도에 의한 영향이 고찰되었다.

• Korean journal of applied entomology
• /
• v.32 no.4
• /
• pp.373-381
• /
• 1993

Resistance evolution to organophosphate-based pesticides in apple and pear inhabiting arthropods of western North America extends to many classes of pest and some beneficial species. Resistance management programs to minimize resistance in pests while exploiting it in natural enemies have met with mixed success. Among beneficials, resistances have been exploited mostly among predators of pest mites. Evolution of resistant mites, leafminers, leafhopper, aphids, leafrollers and some internal fruit feeders have led to development of new monitoring methods and means to delay or avoid resistance. But it is resistance to azinphosmethyl in codling moth (Cydia pomonella) that is changing the pest control system and moving it from chemical to biologically-based means. Newly merging IPM system will depend more on use of biological, cultural, behavior and genetic controls. But more selective pesticides also will be needed to augment pheromones, resistant host plants and genetically altered organisms. These more biologically-based tactics will be prone to resistance evolution in pests as well, if used too unilaterally and/or too extensively.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2005.05a
• /
• pp.40-44
• /
• 2005

Recently PZT is used in ultra precision mechanism field. PZT itself has a small driving range although it has a high resolution. Many methods, such as inchworm, impact driving, inertial sliding method, etc., have been applied for moving range expansion. In this study, a new actuating mechanism for rotational motion with two driving PZT is proposed. The Fixed-Fixed beam support is applied for compensation of the difference in driving force between expansion and contraction of PZT. The behavior and design parameters of the proposed mechanism are analyzed for improving performance.

• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.8
• /
• pp.768-773
• /
• 2012

Packet loss compensation techniques are increasingly important to stable remote control over wireless communication in WNCS (Wireless Networked Control Systems). Its time varying channels, limited bandwidth, interference, and poor signal not only leads to packet loss or latency, but also can negatively affect performance and system stability. This paper presents a compensation technique exploiting an EWMA (Exponentially Weighed Moving Average)-based value estimator to clarify the influence of packet loss on the overall WNCS behavior. As an example of actuator to be remotely controlled, a rotary-type inverted pendulum has been considered, and modeled. Performance evaluation results through Matlab/Simulink and Truetime co-simulation confirm the superiority of the proposed value estimation method over previous approaches.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1997.04a
• /
• pp.248-255
• /
• 1997

The structural behaviors under wheel loads are much different from those under uniform loads which are generally adopted for the design of parking garage. In such a viewpoint, the structural behavior of a Half-PC concrete underground parking garage under wheel loads was investigated using the site instrumentations. The static wheel loads were applied on the structure to evaluate the actual static resistance, and moving load tests were also performed to evaluate the impact factors of the structure. Besides, the impact tests were also conducted to estimate the modal parameters of the structure. Through the experimental investigations, it was found that the structural performance of the underground parking garage can be improved by use of structural type such as Half-PC concrete structures.

• Journal of the Korean Society of Safety
• /
• v.3 no.1
• /
• pp.15-19
• /
• 1988

The falling ball viscometer has been widely used for measuring the viscosity of the Newtonian fluids because of its simple theory and low cost. The use of the falling ball viscometer for measuring the non-Newtonian viscosity has been of interest to rheologists for some years. The analysis of the experimental results in a falling ball viscometer rest on Stokes law which yields the terminal velocity for a sphere moving through an infinite medium of fluids. An attempt to use the falling ball viscometer to measure the non-Newtonian viscosity in the intermediate shear rate ranEe was sucessfully accomplished by combining the direct experimental obserbations with a simple analytical model for the average shear-stress and shear rate at, the surface of a sphere. In the experiments with highly viscoelastic polyacrylamide solutions the terminal velocity was observed to be dependent on the time interval between the dropping of successive balls. The time-dependent phenomenon was used to determine characteristic diffusion times of the concentrated solutions of polyacrylamide.

• Journal of Information Processing Systems
• /
• v.6 no.4
• /
• pp.521-536
• /
• 2010

Spatio-temporal patterns extracted from historical trajectories of moving objects reveal important knowledge about movement behavior for high quality LBS services. Existing approaches transform trajectories into sequences of location symbols and derive frequent subsequences by applying conventional sequential pattern mining algorithms. However, spatio-temporal correlations may be lost due to the inappropriate approximations of spatial and temporal properties. In this paper, we address the problem of mining spatio-temporal patterns from trajectory data. The inefficient description of temporal information decreases the mining efficiency and the interpretability of the patterns. We provide a formal statement of efficient representation of spatio-temporal movements and propose a new approach to discover spatio-temporal patterns in trajectory data. The proposed method first finds meaningful spatio-temporal regions and extracts frequent spatio-temporal patterns based on a prefix-projection approach from the sequences of these regions. We experimentally analyze that the proposed method improves mining performance and derives more intuitive patterns.