• 한국기계가공학회지
• /
• 제21권6호
• /
• pp.22-29
• /
• 2022

In this study, an automatic marking system for fabric inspection machines was developed. The main objectives of the study were to promote intelligence and automation for the inspection process, as well as to increase textile industrial productivity. Generally, when a worker manually inspects and marks a fabric, human error and reduced efficiency are unavoidable. To overcome these problems, we developed an automatic marking system that uses robots. This system incorporates a vision camera to automatically recognize defects, and an optical fiber sensor to detect the side of the fabric. To verify the performance, the control system sends a command directly to the robot to mark the fabric. Finally, the actual production confirmed that the proposed system could perform the desired motion.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 B
• /
• pp.259-261
• /
• 2000

This paper demonstrates the trip of high-voltage motor(6.6kV 4,600Hp). To analyze the causes of damage in motors. exactness analysis of electricity system, analysis inspection of motor and voltage quality analysis fiery development were investigated. This result propose to improvement system and repair method.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.237-240
• /
• 1997

The design of underwater inspection robot system is presented. This robot system is designed for wall inspection in the nuclear plant facility. This paper describes the major components of the robot and its structures. This robot system is consisted of three parts : mechanical electrical and sensing pail. The main problem of designing mechanical part is to select the mechanism of driving. In this system the propeller driving mechanism is selected which can be move the robot continuously. For reducing the size of robot, we designed the CPU and motor controller board. The sensor system is consisted of two parts. One is environment monitoring part and the other is robot localization system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.66-68
• /
• 2005

DC motor is easy to control and can make torque easily. DC motor uses wide range. But DCmotor have limited by using a brush and structural complexity. But, BLDC doesn't have brush so that is more simple than DC motor, and the rotor of BLDC motor is made by permanent magnet that dose not need to make a fixed flux speed for flux current. BLDC motor is very efficiency, controllable, and reliable. This paper presents an error detection with a BLDC motor current. Generally, BLDC motor current is used to current feedback, so that can make a critical fault in the system. this paper suggests to detect error by inspection of threshold current value both positive and negative.

• 정보처리학회논문지B
• /
• 제10B권3호
• /
• pp.305-310
• /
• 2003

본 논문은 자동으로 볼트를 고속 정밀 검사할 수 있는 장치에 대한 시스템 설계 및 제품 개발에 관해 다룬다. 볼트를 연속적으로 고속 검사하기 위해 컨베이어를 이용하고 이를 동작시키기 위한 서보모터와 엔코더를 부착하여 정확한 이송량를 유지하게 된다. 엔코더 신호를 수신한 라인스캔 카메라의 동작에 따라 프레임 그래버로 볼트 영상을 전송하며 한 프레임을 구성한 후 영상 검사 알고리즘에 의해 파라메터를 측정하고 검사하게 된다. 제작된 결과물을 이용하여 실험을 통해 본 장치의 효용성을 입증하고자 한다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 추계학술대회 논문집
• /
• pp.229-230
• /
• 2009

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.903-904
• /
• 2006

This paper is about a vision system that exhibits automatic examination of the conditions of shaft's worm. The system is composed of three part : image acquisition, vision algorithm, and user interface. The image acquisition part is composed of motor control, illumination and optics. The vision algorithm examines the parts using shaft image. User interface is divided into two parts, user interface for feature registering with control value settings and user interface for examination operation. The automatic inspection system introduced in this paper can be used as a tool for final examination of shaft worm.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제17권3호
• /
• pp.224-235
• /
• 2017

Purpose: Reliability is the most important factor to detect defects as wind turbines are deployed in large blades. The methods of detecting defects are various, such as non-destructive inspection and thermal imaging inspection. We propose the phased array ultrasonic testing method of non-destructive testing. Methods: We propose the active pressure mechanism for wind power blade. The phase array ultrasonic inspection method is used for fault detection inner blade surface. Controlled pressure of mechanism with respect to z-axis is important for guarantee the result of phase array ultrasonic inspection. The model based control and proposed mechanism are utilized for overall system stability and effectiveness of system. Result: The result of proposed pressure mechanism B is more stable than A. Convergence speed is also faster than A. Conclusion: We confirmed the performance of the proposed constant pressure mechanism through experiments. Non-destructive testing was applied to the specimen to confirm the reliability of detecting defects.

• 한국소음진동공학회논문집
• /
• 제25권6호
• /
• pp.414-419
• /
• 2015

Recently, commercial ships and other specialized vessels with electric propulsion system employ variable speed induction motor as its prime mover. The wide application of electrical motors also includes being the main drive system in most industrial machineries. However, during its start-up, shutdown, and brake switch operation, excessive torque variation are generated. As such, flexible coupling are installed in order to reduce the transmitted torque fluctuation to the driven side. In this paper, the pulse torque generated by an variable speed induction motor was analyzed theoretically and through measurement of torsional vibration. Induction motor with inverter on marine propulsion system and industrial compressor were used as experimental subjects. The study confirmed that pulse torque are generated regardless of motor speed and interpreted as a vibration source of the whole system. Results presented herein can be adopted as the basis in future amendment of inspection classifying body regulations.

• 한국정밀공학회지
• /
• 제22권5호
• /
• pp.72-79
• /
• 2005

Gearing system emits inconsistent noise from gear teeth impact in case of gear defects. But, it is not easy for inspection operator in production line to distinguish objectively the defective product. Therefore, customer complains continuously bad noise of the geared motor. Because impulsive signal at low frequency has a tendency not to appear in frequency domain, it is difficult to separate the gear inconsistent noise of defective gear from overall geared motor's noise using general signal processing method such as FFT. In this paper, the method to estimate more objectively the inconsistent noise of gearing system and to measure the quantities is suggested. Suggested method uses Cepstrum, Autocorrelation, Comb Lifter and Inverse Cepstrum by turns to make objective quantities about noise level.