• Journal of Apiculture
• /
• v.34 no.3
• /
• pp.245-254
• /
• 2019

We investigated the anti-tumor effects and molecular mechanism of Brazil, China and Korean regional propolis on HeLa ovarian cancer cell line. Each propolis extracts was prepared by ethanol extraction method. Cytotoxicity of propolis extracts was determinated by EZ-cytox cell viability assay. To necessity of anti-tumor effect and molecular mechanism of propolis, we must be adjusting propolis concentration. Due to 100 ㎍/mL of propolis extract were reduced cell viability to less than 50%, we adjusted all of propolis concentration to 100 ㎍/mL. By Western blotting analysis, we confirmed that anti-tumor mechanism of Brazil, China and Korea regional propolis has significantly difference. All of propolis was activated apoptosis related molecules such as PARP, caspase-3. However, cell proliferation signaling molecules including Akt1, ERK and Bcl-2 were reduced the protein expression level. Especially, the expression of tumor suppressor protein p53 was significantly increased in propolis-treated group such as Gyeonggi, Chungbuk, Chungnam, Jeonbuk, Gyeongnam and China. The phosphorylation of Bax which as apoptosis indicator was appeared in propolis-treated group such as Gyeonggi, Gangwon, Chungnam, Gyeongbuk, China. In this results showed that the regional propolis has completely different mechanism in anti-tumor. Thus, propolis extracts may be useful source of functional materials on anti-cancer and it will be able to choose the suitable propolis for cancer therapy by analyzing individual characteristics.

• Tuberculosis and Respiratory Diseases
• /
• v.44 no.3
• /
• pp.611-620
• /
• 1997

Objectives : The differentiation of tuberculous effusion from the other causes of exudative pleural effusion remained difficult even with aids of biochemical analyses and pleural biopsy. As the pathophysiology of tuberculous pleural effusion is an enhanced cell mediated immunity, Adenosine deaminase(ADA) and various eytokines including Inteferon-$\gamma$, tumor necrosis factor alpha(TNF-$\alpha$) are considered as useful diagnostic tools in differentiating exudative pleural effusion. The author would like to demonstrate the diagnostic usefulness of TNF-$\alpha$ in the differentiation of exudative pleural effusion, and compared the discriminating ability of TNF-$\alpha$ with ADA. Methods : Pleural fluids obtained from 80 patients (tuberculous : 39, malignant : 31, parapneumonic : 10) with exudate pleural effusions were processed for cell counts and biochemical analysis including ADA and TNF-$\alpha$. Results : Tuberculous pleural fluid showed higher levels of ADA and TNF-$\alpha$, $48.7{\pm}32.7U/L$ and $184.1{\pm}214.2pg/mL$ than that of non-tuberculous effusion $26.0{\pm}41.3U/L$ and $44.1{\pm}114.2pg/mL$, respectively (ADA, TNF-$\alpha$, p < 0.05, p < 0.01). Receiver operating characteristics(ROC) curves were generated for ADA and TNF-$\alpha$ and the best cut-off value for adenosine deaminase and TNF-$\alpha$were considered as 30U/L and 15pg/ml, respectively. Comparing the area under the ROC curves, there was no significant difference between ADA and TNF-$\alpha$. Conclusion : For the differential diagnosis of tuberculous pleural effusion from the other causes of exudative pleural effusions, TNF-$\alpha$ as well as ADA was considered as useful diagnostic method. However adding TNF-$\alpha$ to ADA has no further diagnotic benefit than ADA alone.

• 한국사회정책
• /
• v.20 no.3
• /
• pp.77-115
• /
• 2013

The purpose of this study is to present empirical evidence for discussion of financing social welfare via estimating optimal tax burden in the main member countries of the OECD by using Hausman-Taylor method considering endogeneity of explanatory variables. Also, the author produced an international tax comparison index reflecting theoretical hypotheses on revenue-expenditure nexus within a model to compare real tax burden by countries and to examine feasibility of tax increase in Korea. As a result of the analysis, the higher the level of tax burden was, the higher the level of welfare expenditure was, indicating the connection between high burden and high welfare from the aspect of scale. The results also indicated that the subject countries recently entered into the state of low tax burden. Meanwhile, Korea had maintained low burden until the late 1990s but the tax burden soared up since the financial crisis related to the IMF. However, due to the impact of foreign economy and the tax reduction policy, it reentered into the low-burden state after 2009. On the other hand, the degree of social welfare expenditure's reducing tax burden has been gradually enhanced since the crisis. In this context, the current optimal tax burden ratio of Korea as of 2010 may be 25.8%~26.5% of GDP based on input of welfare expenditure variables, a percent that Korea was investigated to be a 'high tax burden-low ITC' country whose tax increase of 0.7~1.4%p may be feasible and that the success of tax system reform for tax increase might be higher probability when compare to others. However, measures of increasing social security contributions and consumption tax were analyzed to be improper from the aspect of managing finance when compared to increase in other tax items, considering the relatively higher ITC. Tax increase is not necessarily required though there may be room for tax increase; the optimal tax burden ratio can be understood as the level that may be achieved on average when compared to other nations, not as the "proper" level. Thus, discussion of tax increase should be accompanied with comprehensive understanding of models of economic developmental difference from nations and institutional & historical attributes included in specific tax mix.

• Journal of the Korean Society of Earth Science Education
• /
• v.16 no.2
• /
• pp.166-181
• /
• 2023

The purpose of this study is to examine the change and appropriateness of inquiry tendency in elementary science textbooks by national curriculum period by comparing previous researches that reported Romey's Involvement Index in the science textbook and other subject textbooks. The results of the study are as follows: First, for the text index (T), the value of science textbooks by curriculum tends to continue to decline overall. The value of science textbook based on the 3rd curriculum is judged to be extremely inquiry oriented and the value of the textbooks based on the 2007 and 2015 revised curriculum are the values judged as somewhat authoritative textbook and as a textbook at the appropriate level of inquiry, respectively. There is no significant difference compared to the T values of other subject textbooks since the 2007 revised curriculum; Second, the index of figures and diagrams in the text (FD) of science textbooks also continues to decline by curriculum periods. In particular, the FD value of science textbook of the 2015 revised period is judged to be a authoritative textbook, which is lower than the value of other subject textbooks; Third, in the case of the activity index (A), it gradually decreases from the third curriculum to the 2015 revised curriculum, but it is judged as textbooks suitable for inquiry. However, after the 7th curriculum, the value of A is generally lower than those of other subject textbooks; Fourth, for the index of the questions at the ends of chapters (Q), the value of Q is reported to be extremely limited compared to the aforementioned three indices(T, FD and A), which may be mainly due to differences in the composition of science textbooks by curriculum period.

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.1
• /
• pp.73-79
• /
• 2011

Purpose: The aim of this study was to evaluate the effect of repeated firings on the color of zirconia restoration with different shading method. Materials and methods: Three different types of zirconia frameworks (adding metallic pigments to the initial zirconia powder before sintering (Group NM), dipping the milled frameworks in dissolved coloring agents (Group KI), or application of liner material to the sintered white frameworks (Group KW) were used to support A3 shade dentin porcelain. Repeated firings (3, 5, or 7) were performed, color differences among ceramic specimens were measured using a colorimeter. Repeated measurements analysis of variance (ANOVA) was used to analyze the data for significant difference. The Tukey Honestly Significant Different (HSD) test was used to perform multiple comparisons (${\alpha}$ = .05). Results: 1. $L^*a^*b^*$ values of the ceramic systems were affected by the number of firings (1, 3, 5 or 7 firings) (P < .001) and shading methods (P < .001). 2. As the number of firings increased, the $L^*$ (for all groups) and $a^*$ value (for KW and NM groups) decreased and the $b^*$ value(for all groups) increased. 3. The mean color differences caused by repeated firings were perceptible (${\Delta}E$ > 1) for group KW and KI fired after 3 times, except for group NM fired after 7 times. 4. In order of decreasing ${\Delta}E$ value fired after 7 times, the values were group KI(${\Delta}E$ = 2.26) > group KW (${\Delta}E$ = 1.47) > group NM (${\Delta}E$ = 1.08) (P < .001). Conclusion: Repeated firings influenced the color of the zirconium-oxide all-ceramic specimens with different shading methods.

• Restorative Dentistry and Endodontics
• /
• v.32 no.4
• /
• pp.343-355
• /
• 2007

The objectives of this study was to evaluate the durability of 4 resin cements by means of microtensile bond strength test combined with thermocycling method and fractographic FE-SEM analysis. Experimental groups were prepared according to thermocycling (0, 1,000, 5,000) and the kind of resin cements, those were Variolink II, Multilink, Panavia F 2.0, Rely X Unicem. Flat dentin surfaces were created on mid-coronal dentin of extracted third molars. Then fresh dentin surface was grounded with 320-grit silicon carbide abrasive papers to create uniform smear layers. Indirect composite block (Tescera, Bisco Inc., Schaumburg, IL, USA) was fabricated ($12\;{\times}\;12\;{\times}\;6\;mm^3$). It's surface for bonding to tooth was grounded with silicon carbide abrasive papers from 180- to 600-grit serially, then sandblasted witk $20\;-\;50\;{\mu}m$ alumina oxide. According to each manufacturer's instruction, dentin surface was treated and indirect composite block was luted on it using each resin cement. For Rely X Unicem, dentin surface was not treated. The bonded tooth-resin block were stored in distilled water at $37^{\circ}C$ for 24 hours. After thermocycling, the bonded tooth-resin block was sectioned occluso-gingivally to 1.0 mm thick serial slabs using all Isomet slow-speed saw (Isomet, Buehler Ltd, Lake Bluff, IL, USA). These sectioned slabs were further sectioned to $1.0\;{\times}\;1.0\;mm^2$ composite-dentin beams. The specimens were tested with universal testing machine (EZ-Test, Shimadzu, Japan) at a crosshead speed of 1.0 mm/min with maximum load of 500 N. The data was analyzed using one-way ANOVA and Duncan's multiple comparison test at $p\;{\leq}\;0.05$ level. Within the limited results, we conclude as follows; 1. The bond strength of Variolink II was evaluated the highest among experimental groups and was significantly decreased after 1,000 thermocycling (p < 0.05). 2. The bond strength of Multilink was more affected by thermocycling than the other experimental groups and significantly decreased after 1,000 thermocycling (p < 0.05). 3. Panavia F 2.0 and Rely X Unicem showed the gradually decreased tendency of microtensile bond strength according to thermocycling but there was no significant difference (p > 0.05). 4. Adhesive based-resin cements showed lower bond strength with or without thermocycling than composite based-resin cements. 5. Variolink II & Multilink showed high bond strength and mixed failure, which was occurred with a thin layer of luting resin cement before thermocycling and gradually increased adhesive failure along the dentin surface after thermocycling. The bonding performance of resin cement can be affected by application procedure and chemical composition. Composite based-resin cement showed higher bond strength and durability than adhesive based-resin cement.

• Journal of Chest Surgery
• /
• v.38 no.9 s.254
• /
• pp.627-632
• /
• 2005

Background: The video-assisted thoracic surgery (VATS) with 2 mm thoracoscopy in primary spontaneous pneumothorax (PSP) was known to be unreliable in its accuracy and recurrence rate. We compared 10 mm VATS with 2 mm VATS in the results of operation. Material and Method: From Sept. 1998 to Dec. 2002, 176 cases (10 mm VATS; 73 cases, 2 mm VATS; 103 cases) of PSP were treated by VATS blob resection at Korea University Ansan Hospital. 10 mm thoracoscope, 5 mm port, and 5 mm instruments were used in 10 mm VATS group, and 2 mm thoracoscope, 2 mm ports and 2 mm instruments used in 2 mn VATS group. In the two groups, staples were inserted through 11.5 mm port for chest tube. Result: The mean follow-up duration was 20,8$\pm$16.1 months in 10 mm VATS group, and 13.9 $\pm$8.2 months in 2 mm VATS. The most common indication of operation was a recurrent pneumothorax ($34\%$) in 10 mm VATS and patient's desire ($40\%$) in 2 mm VATS, respectively. The operation time, number of staples used in operation, postoperative chest tube keeping days, postoperative total amount of drainage, and postoperative hospitalization days were statistically lower in 2 mm VATS. Other significant variables affecting the operation time in linear regression analysis were the number of staples that used in operation, the presence of pleural adhesion, and type of pleurodesis and thoracoscope used in operation. However, $R^2$ values were lower than 0.1. The postoperative recurrence rate was $2.7\%$ in 10 mm VATS and $2.9\%$ in 2 mm VATS. It was not significant statistically. Recurrent cases developed within 1 year in both groups but the difference was statistically insignificant. Conclusion: Although there were differences in follow-up duration between two groups, the operation time, number of staples that used in operation, postoperative chest tube keeping days, postoperative total amount of drainage, and postoperative hospitalization days were statistically lower in 2 mm VATS. And in 2 mm VATS, there were no technical difficulties during operation and no differences in recurrence rate from 10 mm VATS. As a result, we suggest that 2 mm VATS can be used in the treatment of PSP.

• Tuberculosis and Respiratory Diseases
• /
• v.51 no.6
• /
• pp.570-578
• /
• 2001

Background: With cases of chronic obstructive pulmonary disease(COPD), weight loss and low body weight have been found to correlate with increased mortality and poor prognosis. Therefore, nutritional aspects are an important part of the treatment in cases of COPD. In Korea, there is only limited data available for the changes of resting pulmonary function in relation to nutritional status. This study was carried out to investigate the differences of resting pulmonary function in relation to the nutritional status of patients with COPD. Method : 83 stable patients, with moderate to severe COPD, were clinically assessed for their nutritional status and resting pulmonary function. The patients' nutritional status was evaluated by body weight and fat-free mass (FFM), which was assessed by bioelectrical impedance analysis. According to their nutritional status, the 83 patients were divided into two groups, designated as the depleted, and non-depleted, groups. Result : Of the 83 patients, 31% were characterized by body weight loss and depletion of FFM, whereas 28% had either weight loss or depleted FFM. In the depleted group, significantly lower peak expiratory flow rate(p<0.05) and Kco(p<0.01), but significantly higher airway resistance(Raw, p<0.05) were noted. There was no difference for the non-depleted group in forced expiratory volume at one second, residual volume, inspiratory vital capacity, or total lung capacity. Maximal inspiratory pressure($P_{Imax}$) was also significantly lower in the depleted group(p<0.05). Conclusion : We conclude, from our clinical studies, that nutritional depletion is significantly associated with the change in resting pulmonary function for patients with moderate to severe COPD.

• Journal of Korean Society of Forest Science
• /
• v.79 no.2
• /
• pp.196-204
• /
• 1990

Pinus densiflora is not only widely distributed but also one of the most economically important timber species in Korea. In Korea, this species is classified into four local forms according to tree forms, as it has widely geographical variations. Trees of Ankang form are dwarfish nearly like shrubs, and those of Keumkang form are very tall and straight. Those of flatland and highland forms are exhibited in-between Ankang and Keumkang forms. This study was carried out to examine biomass, net production and production efficiency among four local forms of Pirzus densiflora forests growing in Korea. For the study, dimension analysis was used for trees and harvest method for shrubs and herbs in four 30-40 year-old stands showing the typical tree forms. Stand biomass of Ankang, flatland, highland and Keumkang forms were 29.87, 110.89, 133.53 and 205.42 t/ha, respectively. As going in order of Ankang, flatland, highland and Keumkang forms, the proportions of stem woods to total tree biomass increased while the proportions of stem barks, live branches, needles and roots showed a tendency to decrease. Stand net productions of Ankang, flatland, highland and Keumkang forms were 3.716, 10.796, 13.097 and 16.500 t/ha yr., respectively. As going in order of Ankang, flatland, highland and Keumkang forms, the proportions of stem woods and lire branches to total tree net production increased while the proportion of needles decreased. In case of live branches, the opposite trend of biomss and net production proportion may be resulted from the differences in the ratio of self-pruning. Net assimilation ratios of Ankang, flatland, highland and Keumkang forms were 1.406, 1.920, 1.487 and 1.677, respectively. Efficiency of needles to produce stems in those forms were 0.239, 0.714, 0.572 and 0.771, respectively. Considering the difference in measuring time, net assimilation ratio and efficiency of needles to produce stems may increase as going in order of Ankang, flatland, highland and Keumkang forms.

• The Journal of Korean Academy of Prosthodontics
• /
• v.51 no.4
• /
• pp.269-275
• /
• 2013

Purpose: The aim of this retrospective study was to evaluate the influence of implant diameter, length and placement to implant stability. Materials and methods: Total 90 implants (US II plus$^{TM}$, Osstem co, Busan, Korea) of 72 patients were determined as experimental samples. The factors of diameters(${\phi}$ 4 mm, ${\phi}$ 5 mm), lengths (10 mm, 11.5 mm, 13 mm), and implant placement (maxilla, mandible) were analyzed. The stability of the implants was measured by resonance frequency analysis (RFA) at the time of implant placement and impression taking. The difference of ISQ values according to patient's gender was evaluated by Independent t-test. ISQ values were compared between implant diameter, length and placement using one-way ANOVA and Tukey HSD test (${\alpha}=.05$). To compare ISQ values between at the time of surgery and impression taking, paired t-tests were used (${\alpha}=.05$). Results: The change of implant length did not show significant different on the ISQ value (P>.05). However, 5 mm diameter implants had higher ISQ values than 4 mm diameter implants (P<.05). Implants placed on the mandible showed significantly higher ISQ values than on the maxilla (P<.05). Conclusion: In order to increase implant stability, it is better to select the wider implant, and implants placed on mandible are possible to get higher stability than maxilla. ISQ values at impression taking showed higher implant stability than ISQ values at implant placement, it means that RFA is clinically effective method to evaluate the change of implant stability through the osseointegration. The consideration of the factors which may affect to the implant stability will help to determine the time of load applying and increase the implant success rate.