• Applied Biological Chemistry
• /
• v.14 no.1
• /
• pp.59-97
• /
• 1971

As a study on the cellulase of Myriococcum albomyces the culture media for enzyme formation and properties of its crude preparation were investigated and the crude enzyme preparation was further fractionated. The results are summarized as follows: 1. Wheat bran solid culture produced stronger activities of cellulase than rice bran or defatted soy bean meal solid culture. 2. Shaking culture with wheat bran, rice bran or defatted soy bean meal produced higher cellulase activities than solid culture with the corresponding media. 3. The enzyme formation was higher at $45^{\circ}C$ than at $37^{\circ}C$ or $50^{\circ}C$ regardless of the kind of culture medium. 4. The formation of CMCase activity was more promoted by organic nitrogen source than inorganic nitrogen source. 5. The formation of cellulase activities were increased 1.5 to 3.0-fold by adding CMC, Avicel or cellulose powder as an inducer into 5% wheat bran basal medium. 6. Cellulase production using a tank culture procedure with addition of CMC or Avicel as an inducer was the highest at fifth day and thereafter decreased slightly. 7. The crude enzyme preparation showed pH optimum in 4.0 to 4.5, and pH stability in the range of 3.5 to 8.0. Optimum temperature for the activity was $65^{\circ}C$ which was higher than among other cellulases and it was stable at $60^{\circ}C$ for 120 minutes. 8. Dialyzed crude enzyme was activated by $Ca^{++}$ and $Mg^{++}$, but inhibited by $Hg^{++}$, $Cu^{++}$ and $Ag^{+}$. 9. Four different types of cellulase, i. e., fraction I, fraction II-a, fraction II-b, and fraction III were purified from the culture filtrate of Myriococcum albomyces through a sequence of ammonium sulfate fractionation, and elution chromatography on DEAE-Sephadex A-25, Amberlite CG-25 type 2 and hydroxyapatite columns. 10. These four cellulase fractions were showed to be homogenous by electrophoresis and ultracentrifugation and also gave a typical ultraviolet absorption spectrum of protein. 11. Four purified fraction showed different specificity toward substrates, fraction I has a stronger activity toward Avicel, cellulose powder, and gauze than that of other cellulase fractions. Fraction II-a had a powerful activity toward cellobiose but it was almost inactive agaisnt fibrous cellulose contrary to fraction I. On the contrary, the main component fraction II-b had a fairly higher activity on CMC and Avicel. Activity of fraction II-b toward cellobiose was about one-third of that of fraction II-a and activity on Avicel was lower than that of fraction I. Fraction III had a more powerful activity in decreasing viscosity of CMC. 12. Final hydrolysis products of fibrous cellulose by each fraction were cellobiose and glucose. Whereas oligosaccharides were predominant in the early stage of hydrolysis, prolonged reaction produced more glucose than cellobiose. Fraction I and fraction II-a acted synergically on Avicel. 13. Optimum pH for the activities of cellulase fraction I, fraction II-a, fraction II-b and fraction III were found to be 5.5, 5.0, 4.0 and $4.0{\sim}4.5$, respectively. These fractions were found to be stable in the range of pH $3.0{\sim}7.5$. 14. Optimum temperature for the activities of fraction I, fraction II-a, fraction II-b, and fraction III were $50^{\circ}C$, $55^{\circ}C$, $60^{\circ}C$ and $55^{\circ}C$, respectively. No less of activity was found by heating 120 minutes at $55^{\circ}C$ and fraction II-a was more stable than the others at $60^{\circ}C$. 15. Fraction I and fraction II-b were activated by $Ca^{++}$ and $Mg^{++}$ but inhibited by $Hg^{++}$ and $Ag^{+}$.

• Korean Journal of Weed Science
• /
• v.6 no.2
• /
• pp.174-190
• /
• 1986

A series of laboratory and greenhouse experiments were conducted to find out the possibility of tissue culture and cell culture methods as a tool to study herbicidal behaviour and herbicide tolerance screening from 1985 to 1986 at the Yeongnam Crop Experiment Station. For dehulled-rice culture, pure agar medium was the most appropriate in rice growth campared to other media used for plant tissue culture method. All the media but the pure agar medium resulted in growth retardance by approximately 50% and this effect was more pronounced to root growth than shoot growth. Herbicidal phytotoxicity was enhanced under light condition for butachlor, 2.4-D, and propanil while this effect was reversed for DPX F-5384 and CGA 142464, respectively. And also, herbicides of butachlor, chlornitrofen, oxadiazon, and BAS-514 resulted in more phytotoxic effect when shoot and root of rice were exposed to herbicide than root exposure only while other used herbicides exhibited no significant difference between two exposure regimes. Similar response was obtained from Echinochloa crusgalli even though the degree of growth retardance was much greater. Particularly, butachlor, 2.4-D, chlornitrofen, oxadiaxon, pyrazolate and BAS-514 totally inhibited chlorophyll biosynthesis even at the single contact of root. Apparent cultivar differences to herbicide were observed at the young seedling culture method and dehulled rice cultivars were more tolerant in DPX F-5384, NC-311, pyrazolate and pyrazoxyfen, respectively. For derant than other types or rice cultivar in butachlor, pretilachlor, perfluidone and oxadiazon while Tongil-type rice cultivars were more tolerant in DPXF-5384, NC-311, Pyrazolate and Pyrazoxyfen, respectively. For dehulled rice culture, on the other hand, Japonica-type rice cultivar was less tolerant to herbicides of butachlor, propanil, chlornitrofen and oxadiazon that was reversed trend to young seedling culture test. Cultivar differences were also exhibited within same cultivar type. In general, relatively higher tolerant cultivars were Milyang 42, Cheongcheongbyeo, Samgangbyeo, Chilseoungbyeo for Tongil-type, Somjinbyeo for Japonica-type and IR50 for Indica-type, respectively. The response of callus growth showed similar to dehulled rice culture method in all herbicides regardless of property variables. However, concentration response was much sensitive in callus response. The concentration ranges of $10^{-9}M-10^(-8)M$ were appropriate to distinguish the difference between herbicides for E. crusgalli callus growth. Among used herbicides, BAS-514 was the most effective to E. crusgalli callus growth. Based on the above results, tissue culture method could be successfully used as a tool for studying herbicidal behaviour and tolerance screening to herbicide.

• Cartoon and Animation Studies
• /
• s.9
• /
• pp.127-142
• /
• 2005

Not only in Korea but throughout the entire world millions of people are in contact with images. Images have become a medium through which to transmit anything from simple visualizations of moving images to knowledge and information. The age of the internet has arisen thanks to scientific development, and the internet generation's acquisition of information is continuously becoming faster. The spectators, ufo must choose amongst the excessive amount of available information, are changing along with it just as quickly. The method of visual transmission has changed to match the demands of the fast-changing pace of the new generation. In order to receive an instantaneous selection amongst much information, the primary requisite is attracting one's attention, and then presenting a corresponding feeling of satisfaction. The early stages of film arose from the desire to capture one's actual situation as it realty is. Unsatisfied with the still picture, people developed the motion picture. Research has succeeded in reproducing 3-dimensional images more realistic than the actual image we perceive as a result of the difference in visual perspective of both eyes and their response to rays of light From color film to 3-dimensional pictures, people enjoy the magnificent results of this. All fields within the category of film are continuously studying the human desire to pursue their visual side, namely the pursuit of visual images with a maximum sense of reality. The images that millions of people around the world see now are flat. The screen's depth and optical illusions effectively give a sense of reality while conveying information. However, although the flat screen is able to create a sense of depth using the different visual perspective of each eye for the realization of a cubic effect, there are limitations. Entering the 21s1 century, there is a quickly-arising branch within the field of image media which seeks to overcome these limitations Although 3-dimensional images began in films, entering the latter half of the 20th century, due to development of 3-dimensional images using the mediums of the animation field, cellular phones, advertisement screens, television etc., without restriction is designated as 'image.'. With research having started around 1900 and continuing for over 100 years, we are now able to witness the popularization of 3-dimensional films happening before our very eyes. Within our own country, we can frequently see them at amusement parks and museums. In the future, through the popularization of HDTV etc., there is a good outlook for practical use of 3-dimensional images in televisions with advanced picture qualify as well as in other areas. Together with the international current, research on 3-dimensional films has been activated in Korea and is rising as a main current in the film industry. Within this context, the contents and understanding of 3-dimensional images must keep in step with the pace of technical advancements. In order to accelerate of development of film contents to keep in pace with technical developments, this dissertation presents the techniques and technical aspects of future developments, and shows the need to prepare in advance to make the field grow- and thereby avoid having a lack of experts and being conquered by other nations in the field - rather than only advancing the technical aspects and importing the contents. This dissertation aims to stimulate interest and continual research by progressive-thinking people related to the film industry. Part II looks into the definition and types of 3-dimensional motion pictures, the terminology, the fundamentals of image formation, current market fluctuations, and looks into 3-dimensional techniques which can be borrowed and introduced in 3-dimensional animations. Part III concerns 3-dimensional animated films. It analyzes 3-dimensional production techniques while using the introduction of specific animation techniques in the 2004 production Lee Sun Shin and Nelson - Naval Heroes 3-dimensional animation produced in 2004 by Clay & Puppet Stop-Motion Animation & Computer Graphic. Original Korean title: 해전영웅 이순신과 넬슨. as an example, and it also looks into how current film techniques used in animations can be applied in 3-dimensional films. Additionally, the actual stages of the various fields of 3-dimensional animations are presented. Given the current direction and advancement of 3-dimensional films making use of animations and the possible realization of this field, the author plans to weigh the development of this yet unexploited new market Not looking at the current progress of the field, but rather the direction of the hypothetical types of animation techniques, the author predicts the marketability and possibility of development of each area.

• Cartoon and Animation Studies
• /
• s.41
• /
• pp.455-486
• /
• 2015

The 3D printing technology, which started from the patent registration in 1986, was a technology that did not attract attention other than from some companies, due to the lack of awareness at the time. However, today, as expiring patents are appearing after the passage of 20 years, the price of 3D printers have decreased to the level of allowing purchase by individuals and the technology is attracting attention from industries, in addition to the general public, such as by naturally accepting 3D and to share 3D data, based on the generalization of online information exchange and improvement of computer performance. The production capability of 3D printers, which is based on digital data enabling digital transmission and revision and supplementation or production manufacturing not requiring molding, may provide a groundbreaking change to the process of manufacturing, and may attain the same effect in the character merchandise sector. Using a 3D printer is becoming a necessity in various figure merchandise productions which are in the forefront of the kidult culture that is recently gaining attention, and when predicting the demand by the industrial sites related to such character merchandise and when considering the more inexpensive price due to the expiration of patents and sharing of technology, expanding opportunities and sectors of employment and cultivating manpower that are able to engage in further creative work seems as a must, by introducing education courses cultivating manpower that can utilize 3D printers at the education field. However, there are limits in the information that can be obtained when seeking to introduce 3D printers in school education. Because the press or information media only mentions general information, such as the growth of the industrial size or prosperous future value of 3D printers, the research level of the academic world also remains at the level of organizing contents in an introductory level, such as by analyzing data on industrial size, analyzing the applicable scope in the industry, or introducing the printing technology. Such lack of information gives rise to problems at the education site. There would be no choice but to incur temporal and opportunity expenses, since the technology would only be able to be used after going through trials and errors, by first introducing the technology without examining the actual information, such as through comparing the strengths and weaknesses. In particular, if an expensive equipment introduced does not suit the features of school education, the loss costs would be significant. This research targeted general users without a technology-related basis, instead of specialists. By comparing the strengths and weaknesses and analyzing the problems and matters requiring notice upon use, pursuant to the representative technologies, instead of merely introducing the 3D printer technology as had been done previously, this research sought to explain the types of features that a 3D printer should have, in particular, when required in education relating to the development of figure merchandise as an optional cultural contents at cartoon-related departments, and sought to provide information that can be of practical help when seeking to provide education using 3D printers in the future. In the main body, the technologies were explained by making a classification based on a new perspective, such as the buttress method, types of materials, two-dimensional printing method, and three-dimensional printing method. The reason for selecting such different classification method was to easily allow mutual comparison of the practical problems upon use. In conclusion, the most suitable 3D printer was selected as the printer in the FDM method, which is comparatively cheap and requires low repair and maintenance cost and low materials expenses, although rather insufficient in the quality of outputs, and a recommendation was made, in addition, to select an entity that is supportive in providing technical support.

• Journal of Global Scholars of Marketing Science
• /
• v.18 no.3
• /
• pp.89-114
• /
• 2008

Most of the extant studies on communication effects have been devoted to the typical issue, "what types of communication activities are more effective for brand awareness or brand attitudes?" However, little research has addressed another question on communication decisions, "what makes communication activities less effective?" Our study focuses on factors negatively influenced on the efficiency of communication activities, especially of Advertising. Some studies have introduced concepts closely related to our topic such as consumer confusion, brand confusion, or belief confusion. Studies on product belief confusion have found some factors misleading consumers to misunderstand the physical features of products. Studies on brand confusion have uncovered factors making consumers confused on brand names. Studies on advertising confusion have tested the effects of ad models' employed by many other firms for different products on communication efficiency. We address a new concept, Ad noises, which are any factors interfering with consumers exposed to a particular advertisement in understanding messages provided by advertisements. The objective of this study is to understand the effects of ad noises caused by ad models on brand awareness and brand attitude. There are many different types of AD noises. Particularly, we study the effects of AD noises generated from ad model selection decision. Many companies want to employ celebrities as AD models while the number of celebrities who command a high degree of public and media attention are limited. Inevitably, several firms have been adopting the same celebrities as their AD models for different products. If the same AD model is adopted for TV commercials for different products, consumers exposed to those TV commercials are likely to fail to be aware of the target brand due to interference of TV commercials, for other products, employing the same AD model. This is an ad noise caused by employing ad models who have been exposed to consumers in other advertisements, which is the first type of ad noises studied in this research. Another type of AD noises is related to the decision of AD model replacement for the same product advertising. Firms sometimes launch another TV commercial for the same products. Some firms employ the same AD model for the new TV commercial for the same product and other firms employ new AD models for the new TV commercials for the same product. The typical problem with the replacement of AD models is the possibility of interfering with consumers in understanding messages of the TV commercial due to the dissimilarity of the old and new AD models. We studied the effects of these two types of ad noises, which are the typical factors influencing on the effect of communication: (1) ad noises caused by employing ad models who have been exposed to consumers in other advertisements and (2) ad noises caused by changing ad models with different images for same products. First, we measure the negative influence of AD noises on brand awareness and attitudes, in order to provide the importance of studying AD noises. Furthermore, our study unveiled the mediating conditions(variables) which can increase or decrease the effects of ad noises on brand awareness and attitudes. We study the effects of three mediating variables for ad noises caused by employing ad models who have been exposed to consumers in other advertisements: (1) the fit between product image and AD model image, (2) similarity between AD model images in multiple TV commercials employing the same AD model, and (3) similarity between products of which TV commercial employed the same AD model. We analyze the effects of another three mediating variables for ad noises caused by changing ad models with different images for same products: (1) the fit of old and new AD models for the same product, (2) similarity between AD model images in old and new TV commercials for the same product, and (3) concept similarity between old and new TV commercials for the same product. We summarized the empirical results from a field survey as follows. The employment of ad models who have been used in advertisements for other products has negative effects on both brand awareness and attitudes. our empirical study shows that it is possible to reduce the negative effects of ad models used for other products by choosing ad models whose images are relevant to the images of target products for the advertisement, by requiring ad models of images which are different from those of ad models in other advertisements, or by choosing ad models who have been shown in advertisements for other products which are not similar to the target product. The change of ad models for the same product advertisement can positively influence on brand awareness but positively on brand attitudes. Furthermore, the effects of ad model change can be weakened or strengthened depending on the relevancy of new ad models, the similarity of previous and current ad models, and the consistency of the previous and current ad messages.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.44 no.2
• /
• pp.25-36
• /
• 2016

This paper discusses the character of communication among participating stakeholders in the Improving Alley Landscapes in Residential Neighborhoods project. The participation of diverse stakeholders in conventional urban redevelopment is considered to delay and complicate the progress of a project. However, in urban regeneration, a field-oriented operating system and collaboration between diverse stakeholders is considered critical to building a sustainable community. A stakeholder is defined as "a person or organization that can influence decision-making or be influenced by it." This paper uses a case study to examine what types of stakeholders participate and what communicative processes and ideas are shared among them. Six neighborhoods were selected out of a total of 26 of Seoul's 2014 Improving Alley Landscapes project. This research was developed through interviews and a review of the literature. The character of communication among stakeholders in the case study is as follows. Firstly, the administration initiated the project but did not show leadership. This was caused by a gap in understanding about the project between city and borough administrations, Further, the city administration lacked experience with projects that placed an emphasis on fieldwork. Tongjand and Banjang, at ancillary institutions, acted as spokespersons and helped people in the community to understand the administrative process. However, because they led communication and used personal relationships to ensure they communicated effectively, the communication process had limits from the perspective of democratic process. Diverse stakeholders expressed their opinions in the public sphere and communicated about them using diverse media. Finally, experts produced the output, facilitated communication, and mediated in conflicts. Because new experts acted as facilitators and mediators, there was a great deal of trial and error. This project has particular significance: Seoul's city government deals with urban space rather than parks and green space, which are limited by boundaries; and whether "green" can be used for urban renovation was tested by several landscape architects, who sought to identify a new role in urban renovation, namely, the role of landscape and landscape architecture. However, the project has some limitations, including an insufficiently detailed project plan, a lack of common understanding among stakeholders, and a short timeframe. A number of stakeholders overcame these limitations to a certain degree. Officials of the Borough and the Dong managed the project and resolved civil complaints. Experts provided special information, and contributed to the design and construction of improvements.

• Cartoon and Animation Studies
• /
• s.33
• /
• pp.153-172
• /
• 2013

There are many cases that messages of boring contents of most contents with public interests appear on the surface. Audiences don't think these contents are interesting. It is true that animations cannot be generally boring when delivering messages of public interests. was produced to focus on making audiences experience that a global warming story, the boring and textbook contents is interesting. And it was composed by the multiform story to realize narration through audiences' participation by utilizing the characteristics of live windows, not just watching the animation. This paper examines the differences between theaters and live window through the case that was produced and examples which utilized interaction for audiences' participation based on this. It analyzes the differences between environments according to characteristics of places and audiences in the differences between the theaters and live window, examines the examples to utilize interaction focusing on the process that narration is gradually changed as response to user environment design and interaction for unspecified individuals, and suggests direction that animation should move forward as public art based on the results to show the animation in Millano Piazza. According to the characteristics of live windows, the audiences of are people in the streets who are heading for different destinations, not the ones who come to theaters to watch the animation. Showing the animation with narration to them was a new attempt. When it began to show it in Millano Piazza, the audiences were very satisfied with the experiences that the stories were changed as they participated in it by themselves and naturally thought of global warming problems. You cannot know how the message of change people's habits and thoughts for the present, but this attempt was an opportunity that animations play the social role. Many animations are being produced in the world. Most of them are being done to aim at theaters, TVs, and film festivals. They should meet audiences through more various methods. One of them is animations as public art. And can be the new attempt in this sense. And in the future, animations as public art should make efforts to show you interesting experiences that you can share thoughts to be able to live together. As art of various media is changing to the one which considers public interests, animations can be new types of public art by integrating them with various technologies.

• Journal of Distribution Science
• /
• v.12 no.4
• /
• pp.5-9
• /
• 2014

Purpose - The purpose of this study was to compare and contrast the applicability and effectiveness of both teukyakmeip contracts of Korea and consignment contracts of the United State to demonstrate the effectiveness and practicability of teukyakmeip in Korea. These are popular contract agreements between large retailers and their suppliers and vendors. In recent years, teukyakmeip was critically examined and scrutinized by the politicians, the media, and the public of Korea. Consequently, this paper focusesheavily on identifying and analyzing different types of contract agreements between large retailers and their suppliers that currently exist in Korea and compares and contrasts those analyzed contract agreements with teukyakmeip. The article also comparesand contrasts teukyakmeip with the consignment agreements of the United States to identify similarities and differences. Research design, data, and methodology - This study is a descriptive study and has used personal interviews to collect and analyze the data. This study also fits the definition of the case study wherein it is entirely focused on investigating a real-life event: analyzing and examining contract agreements in the distribution industry. Both randomly selected management and vendor representatives from the three major department stores, Lotte, Hyundai, and Shinsegae, in Korea were interviewed between July and September 2013. The analysis of the consignment agreement was conducted based on existing secondary data. Results - Although the evidence of the abuse of teukyakmeip and consignment by large retailers from both countries clearly exists, the findings suggestthat both contract agreements would remain as the most relevant and effective legal contracts between large retailers and their suppliers. Based on the comparisonanalysis of teukyakmeip and consignment, both contracts indicated that suppliers are fully responsible for inventory and inventory management. If sales person is necessary for promoting special product, then suppliers are responsible for providing a sales person and their wages under both contracts. However, American department stores, those located outside urban area, tend to use their own employees to perform special product and sales promotion. The retailersare fully responsible for any interior or floor design or redesign of the retail store to accommodate the products from vendors under consignment; however, both suppliers and retailers share the cost of designing and redesigning the interior to accommodate vendors'products under teukyakmeip. Suppliers are responsible for pricing and supplying the quantity of the products under both agreements. Both contracts allow special sales commission as long as vendors agreed. Vendors use this special commissionto introduce their new products or apply market penetration strategy. Conclusions -The findings of this study showed the changing pattern of contract agreements between large retailers and their suppliers from both countries. Furthermore, this study evidently generated policy implications of teukyakmeip which recently became the major social issue in Korea and attracted many policymakers to gain political points by criticizing the teukyakmeip system and the large retailers. The findings of the study would be valuable to policy makers in making appropriate decisions and to large retailers and vendors in making beneficial agreements. The major implication of this study is that teukyakmeip and consignment agreements include very similar or almost identical characteristics, and they are popular among department stores and suppliers. The issue of abolishing teukyakmeip in Korea needs to be examined cautiously because teukyakmeip is the best one available at the moment, and the study suggests that no one benefits from abolishing this system.

• Journal of Digital Convergence
• /
• v.10 no.10
• /
• pp.483-490
• /
• 2012

In parallel with advancement of the industrial society and accompanied quality-of-life improvement, jewelry is now rather viewed as one of common accessories used in daily life, than as a luxurious item as treated before change of perception about it in the past, attracting thus gradually multiplying demand for it. Thanks to rapid spread of multi media like the Internet, an increasing number of people have come to develop great liking for exceptional design and unique format of jewelry products. Following drain of their reserves, natural gems are unlikely to meet the demand for them fully in the future. As a consequence, it seems essential to rely on synthetic, artificial, imitation jewelry or organic substances and quasi-mineral in amorphous structure for substitute jewelry. Since synthetic jewelry has such a great potential as substitute jewelry, it is expected to maximize added value to jewelry if and when accompanied with development of creative design and upgrading of processing technology for jewelry, in addition to various types of synthetic jewelry and glass that have been already put in use as substitute substances. Synthetic jewelry is thus believed to be able to greatly contribute to progress of the jewelry industry. In many countries of the world, jewelry and gem industry has been regarded as one of promising sectors vital in enriching the national wealth. In this context, the Korean Ministry of Finance and Economy announced in July 2007 "an activating policy for the jewelry and gem industry, declaring to cultivate and grow it to be new engine for the nation's growth". The present paper thus aims to conduct a study exclusively on cutting design of synthetic jewelry as a part of measures to activate the jewelry industry in Korea. Efforts are made to develop designs for jewelry that are unique and different from the conventional stereotyped form of polishing and are added with color, pattern and fashionable cutting. Priority is given in this regard to designing jewelry that may attract general public and may be shared by public beyond the limit of conventional design for jewelry and producing products that stand in contrast with other products. By upgrading the quality of jewelry design, competitiveness of the jewelry industry may be ensured and the creative area of jewelry design may be expanded by far.

• Journal of Korean Society of Forest Science
• /
• v.77 no.1
• /
• pp.43-52
• /
• 1988

One-year-old seedlings of Ginkgo biloba were treated with various simulated acid rains(pH 2.0, pH 3.0, pH 9.0 and pH 5.0) to examine the effects of simulated acid rain on the chemical properties of the tested soil. The seedlings were grown in a pot($4500cm^3$)containing one of three different soils(nursery soil, mixed soil and sandy soil). Simulated acid rain was made by diluting sulfuric and nitric acid solution($H^1SO^4$ : $HNO^3$ =3 : 1, V/V) with tap water and tap water(pH 6.4), and treated by 5mm each time for three minutes during the growing seasons(April to October 1985). Acid rain treatments were done three times per week to potted seedlings by spraying the solutions. The chemical properties of potting media were compared among three soil types as well as among the various pH levels. The results obtained in this study were as follows : 1. Exchangeable calcium and magnesium contents and base saturation of the soil decreased with decreasing pH levels of acid rain, and their decreasing rates were as follows : sandy soil was the highest, followed by mixed and nursery soils, However, exchangeable aluminum content rather increased as the pH levels decreased. 2. Available phosphate in the soil decreased as the pH levels of acid rain decreased. Its content increased in nursery soil, compared with those before acid gain treatment, Gut decreased in mined and sandy soils. 3. Soil sulfate and nitrate contents increased remarkably as the pH levels decreased, and the only significant difference in the sulfate was found among the pH levels. Soil sulfate content was the highest in nursery soil, followed by mixed and sandy soils.