• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.3
• /
• pp.202-206
• /
• 2001

Using THz time-domain spectroscopy (THz-TDS), the power absorption, the index of refraction, and the real conductivity of silica sand are measured from 0.1[Thz] to 0.5[Thz] frequency range. It is impossible to measure the characterization of the silica sand by simple electrical measurements using mechanical contacts, e.g., Hall effect or four-point probe measurements. However, the THz-TDS technique can measure not only electrical but also optical characterization of he sample. Also this technique can measure frequency dependent results. Especially, the real conductivity was increased according to THz frequency. This is unusual material compare with metal and semiconductor materials; the measured real conductivity are not followed by the simple Drude theory.

• The Pure and Applied Mathematics
• /
• v.27 no.1
• /
• pp.13-24
• /
• 2020

In this article, we investigate the solvability of nonlinear fractional integro-differential equations of the Hammerstein type. The results are obtained using the technique of measure of noncompactness and the Darbo theorem in the real Banach space of continuous and bounded functions in the interval [0, a]. At the end, an example is presented to illustrate the effectiveness of the obtained results.

• Proceedings of the Safety Management and Science Conference
• /
• 2013.04a
• /
• pp.163-172
• /
• 2013

In this Paper, We study on establish for unit of measure. Quality means abstract for customer needs. we surveyed unit of measurement of quality feature of Juran, Taguchi, 6 sigma method. We suggest unit of measurement of quality feature. Each enterprise can use defining own unit of measurement of quality feature. Effect is expected in enterprise that these proposals do quality control. There is meaning in direction that measuring mean of quality feature that propose in this treatise understands actuality to be deeply and reconcile exact point of theory.

• Proceedings of the Safety Management and Science Conference
• /
• 2011.11a
• /
• pp.157-165
• /
• 2011

In this Paper, We study on establish for unit of measure. Quality means abstract for customer needs. we surveyed unit of measurement of quality feature of Juran, Taguchi, 6 sigma method. We suggest unit of measurement of quality feature. Each enterprise can use defining own unit of measurement of quality feature. Effect is expected in enterprise that these proposals do quality control. There is meaning in direction that measuring mean of quality feature that propose in this treatise understands actuality to be deeply and reconcile exact point of theory.

• The Pure and Applied Mathematics
• /
• v.20 no.4
• /
• pp.287-298
• /
• 2013

A standard deviation has been a starting point for a mathematical definition of risk. As a remedy for drawbacks such as subadditivity property discouraging the diversification, coherent and convex risk measures are introduced in an axiomatic approach. Choquet expectation and g-expectations, which generalize mathematical expectations, are widely used in hedging and pricing contingent claims in incomplete markets. The each risk measure or expectation give rise to its own pricing rules. In this paper we investigate relationships among dynamic risk measures, Choquet expectation and dynamic g-expectations in the framework of the continuous-time asset pricing.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.3
• /
• pp.42-48
• /
• 1996

In this paper, a position correction system of industrial robot for door-chassis assembly tast is developed in connection with the position correction algorithm shown in Part I. Tow notches and a hole of auto chassis are selected as the reference measure points and a vision based error detection algorithm is devised to measure in accuracy of less than 0.07mm. And also, the transformation between base and tool coordinates of the robot is shown to send the suitable correction quantities caaording to robot's option. The obtained algorithms were satisfactorily implemented for a real door-chassis model such that the system could accomplish visually acceptable door-chassis assembly task.

• The Journal of Korean Society for Radiation Therapy
• /
• v.17 no.2
• /
• pp.147-153
• /
• 2005

Purpose : We should use a computed tomography-simulator for the body measure and compensator manufacture process was practiced with TBI's positioning in process and to estimate the availability.,Materials and Methods : Patient took position that lied down. and got picture through computed tomography-simulator. This picture transmitted to Somavision and measured about body measure point on the picture. Measurement was done with skin, and used the image to use measure the image about lungs. We decided thickness of compensator through value that was measured by the image. Also, We decided and confirmed position of compensator through image. Finally, We measured dosage with TLD in the treatment department.,Results : About thickness at body measure point. we could find difference of $1{\sim}2$ cm relationship general measure and image measure. General measure and image measure of body length was seen difference of $3{\sim}4$ cm. Also, we could paint first drawing of compensator through the image. The value of dose measurement used TLD on head, neck, axilla, chest(lungs inclusion), knee region were measured by $92{\sim}98%$ and abdomen, pelvis, inquinal region, feet region were measured by $102{\sim}109%$.,Conclusion : It was useful for TBI's positioning to use an image of computed tomography-simulator in the process. There was not that is difference of body thickness measure point, but measure about length was achieved definitely. Like this, manufacture of various compensator that consider body density if use image is available. Positioning of compensator could be done exactly. and produce easily without shape of compensator is courted Positioning in the treatment department could shortened overall $15\{sim}20$ minute time. and reduce compensator manufacture time about 15 minutes.

• Journal of Korean Academy of Nursing Administration
• /
• v.9 no.2
• /
• pp.251-264
• /
• 2003

Purpose : The expectations are defined as desired expectations in initial SERVQUAL scale(1985, 1988), but in modified SERVQUAL scale(1991), are defined as a feasible ideal point expectations. In assessment of nursing service quality by SERVQUAL scale, the definitions of expectations is important problem. The purpose of this study was to compare the feasible ideal point expectations with the desired expectations in assessment of nursing service quality using SERVQUAL scale. Methods : The subjects were 256 inpatients at 4 general hospitals in Jeju-do(123 for feasible ideal point and 133 for desired). The data were collected by two types of self-reporting questionnaires to measure the feasible ideal point and desired expectations. For data analysis, t-test, multiple regression, and comparative analysis of multiple Rs via Fishers Z transformation. Results : Compared with the SERVQUAL scores, the feasible ideal point expectations better explained the variations of the overall consumer satisfaction($R^2$=O.33) than the desired($R^2$=O.25). Conclusion : The feasible ideal point expectations were more suitable to the assessment of nursing service quality using SERVQUAL scale. It will be need to explore the conceptual definitions of expectations using SERVQUAL scale in different settings. Also, further study needs to be conducted to compare alternative service quality measurement scales.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.5
• /
• pp.1-8
• /
• 2006

The Five Point Method of KS and Four Point Method of IES are generally used to measure and compute the average illuminance in residential areas. Such methods of measurement should be used exactly according to the characteristics of the space and activities. Therefore, this study evaluated computation methods of the average illuminance in terms of comparing the measured values with simulated ones. The Five Point Method of KS is very closed to evaluate task illuminancefor appreciating activities at the center while the Four Point Method of IES is very closed to a concept of the average illuminance over the space excluding the possible maximum and minimum illuminance values.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.5 no.7
• /
• pp.9-15
• /
• 1982

The rectilinear-distance location problem combines the property of being a very appropriate distance measure for a large number of location problems and the property of being very simple to treat analytically. An obvious question to be asked at the optimal point which is obtained by the rectilinear distance method is, "what if the point is not available as a location site\ulcorner." The point may, for example, be inaccessible or may coincide with the location of another structure, a river, or a municipal park. In this case, one approach that may be employed is to construct contour lines (also called iso-cost or level curves) of the cost function. Contour lines provide considerable insight into the shape of the surface of the total cost function as well as a useful means of evaluating alternative locations for the new facility. But, when there is an obstacle which divides the application area into two. The optimal location(which is acquired by the rectilinear distance method) is not coincide with the minimal cost point and the contour line is occasionally of no use, this paper shows the method of finding a way to decide an optimal point of single facility location in this case.this case.