• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2001.11a
• /
• pp.119-123
• /
• 2001

In this paper, a new structure and fabrication method for the wafer level package(WLP) is presented. A packaged VLSI chip is encapsulated by a parylene(which is a low k material) layer as a dielectric layer and is molded by SUB photo-epoxy with dielectric constant of 3.0 at 100 MHz. The electrical parameters (R, L, C) of package traces are extracted by using the Maxwell 3-D simulator. Based on HSPICE simulation results, the proposed wafer level package can operate for frequencies up to 20GHz.

• Proceedings of the KIPE Conference
• /
• 2013.11a
• /
• pp.212-213
• /
• 2013

본 논문은 양방향 DC-DC 컨버터용 변압기 설계 및 해석에 대해 기술하였다. 시뮬레이션을 통해 변압기를 설계 하였으며 각 권선방법에 따른 누설인덕턴스를 측정하였다. 실제 변압기와 비교하여 누설인덕턴스 값을 검증하였다. 시뮬레이션 프로그램은 Maxwell 3D를 사용하였으며 변압기는 직접 설계 및 제작하였다.

• 전기의세계
• /
• v.29 no.9
• /
• pp.599-603
• /
• 1980

Mathematically, the Electromagnetic phenomena can be represented by the Maxwell's equations, but it is very difficult to solve these equations, especially, having complex structural boundaries. By the way, the development of a computer system made us easy to solve these kind of partial differential equations. The Finite Element Method, one of the numerical methods, is very this. This paper shows the power of F.E.M. by examining, with an example of a hollow cylinder in a uniform magnetic field which is analytically solvable, the errors and the tendency of magnetic flux lines.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1107-1108
• /
• 2011

본 논문에서는 전력용 변압기 온도상승을 예측하기 위해 CFD 상용 프로세서인 Fluent를 이용하였다. 온도상승의 원인이 되는 전력손실은 자계 상용 프로세서인 Maxwell을 이용하였으며, 자계해석에 의해 얻은 전력손실을 유체역학과 열전달을 동시에 고려한 열유동해석의 열원으로 적용하였다. 해석의 정확도를 향상시키기 위해 변압기 권선의 형상을 실제형상과 유사하게 모델링하였으며, 해석결과의 타당성을 검증하기 위해 온도 상승 시험을 통해 얻은 측정값과 비교하였다.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2002.11a
• /
• pp.187-190
• /
• 2002

The Electrodeless lamp is intended as a high efficacy replacement for the incandescent reflector lamp in many applications. but Increasing awareness of electromagnetic compatibility(EMC) issues in lighting application, the problems of interference generation by electrodeless fluorescent lighting system have been highlighted. In this paper, Maxwell 2D finite element analysis program(Ansoft) is used to obtain electromagnetic properties associated with the coil and nearby structures. and also evaluated Flux B, H by changing the input current.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.826_827
• /
• 2009

This paper introduces major potential faults of Poly-Phase Permanent Magnet Synchronous Motor and their simulation realization methods. The faults of Poly-Phase PM Synchronous Motor, generally, stator turn faults, demagnetizing field. Based on the derived expressions, Poly-Phase PM synchronous Motor simulation model, which is capable of representing stator turn faults, is implemented in Maxwell.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1442_1442
• /
• 2009

This paper describes electric field analysis and design of direct current arresters for electric traction vehicles. Generally, DC arresters are used to protect the electric traction to limit the overvoltage invading into its inner electrical circuits. We could proposed operating voltage(Uc), the rated voltage(Ur). Finally maxwell 2D simulator based on the boundary element method was also introduced in order to verify the reliability of the DC arresters.

• Journal of the Korean Mathematical Society
• /
• v.40 no.4
• /
• pp.577-593
• /
• 2003

The Funk transform is defined by integrating a function on the two-sphere over its great circles. We use complex analysis to invert this transform.

• 전기의세계
• /
• v.39 no.3
• /
• pp.39-46
• /
• 1990

반도체 내에서의 전자장 해석을 위한 Maxwell방정식의 단순화, 반도체 방정식의 전개, 물리적인 모델링, 수치해석 기법, 응용분야 및 차세대 반도체 기술 개발을 위한 device simulation 기술등을 review하였다. Poisson방정식의 고유한 quasi-static apporximation을 고찰하였으며, Drift 확산식의 유효성 범위를 증가시키기 위하여 각 물리적인 모델들을 review하였다. 반도체 수치해석에서 빈번히 사용해온 F.D.M.F.E.N.및 B.E.M기법의 장단점과 각각으 수치해석 기법을 이용한 Simulation tool들을 언급하였다. 또한 현재의 반도체 기술과 차세대 반도체 memory기술을 위한 Simulation의 응용분야 및 3차원 Simulation에 필요한 기본적인 tool의 조건을 언급하였다.

• Electrical & Electronic Materials
• /
• v.11 no.10
• /
• pp.24-31
• /
• 1998

Interfacial effect in polymetric composites have been studied extensively. This report deals mainly with the effects of interfacial space charge and interface structure. A model for the dynamic process of interfacial space charge accumulation is proposed. The new model might interpret some interface phenomena which is difficult to be explained in terms of traditional Maxwell-Wagner theory. An interface structure is also presented, by which the importance of surface treatment of glass Fiber for improving the properties of FRP could be well understood.