• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2015년도 학술발표회
• /
• pp.488-488
• /
• 2015

Intermittent streamflow is common phenomenon in arid and semi-arid regions. To manage water resources of intermittent streamflows, stochactic simulation data is essential; however the seasonally stochastic modeling for intermittent streamflow is a difficult task. In this study, using the periodic Markov chain model, we simulate intermittent monthly streamflow for occurrence and the periodic gamma autoregressive and copula models for amount. The copula models were tested in a previous study for the simulation of yearly streamflow, resulting in successful replication of the key and operational statistics of historical data; however, the copula models have never been tested on a monthly time scale. The intermittent models were applied to the Colorado River system in the present study. A few drawbacks of the PGAR model were identified, such as significant underestimation of minimum values on an aggregated yearly time scale and restrictions of the parameter boundaries. Conversely, the copula models do not present such drawbacks but show feasible reproduction of key and operational statistics. We concluded that the periodic Markov chain based the copula models is a practicable method to simulate intermittent monthly streamflow time series.

• 한국수자원학회논문집
• /
• 제48권12호
• /
• pp.969-979
• /
• 2015

본 연구에서는 가뭄의 특성분석에 유리하며, 확률론적 접근이 가능한 은닉 마코프 모델(HMM) 기반의 가뭄 분석 기법을 적용하였다. HMM 기반의 가뭄의 심도뿐만 아니라 지속시간을 동시에 평가할 수 있도록 코플라 함수 기반의 이변량 가뭄빈도해석 기법을 도입하여 우리나라의 2015년 가뭄 빈도를 평가하였다. 가뭄빈도분석 결과 최근 40년 자료를 기준으로 영동지방에 비해 영서지방이 전체적으로 가뭄이 발생할 경우 가뭄의 심도가 큰 것으로 평가되었다. 심한가뭄의 발생 비율의 경우에 철원의 경우 10%를 상회하는 등 임진강 유역에서 상대적으로 심한가뭄의 발생비율이 크다는 것을 확인할 수 있었다. 한강유역 일부지점에서는 2014/2015년의 가뭄 지속기간 및 심도의 결합재현기간이 1,000년이 넘는 가뭄이 발생하고 있는 것으로 평가되었다. 특히 북한강 및 임진강 유역에 심한 가뭄이 발생하고 있으며 전반적으로 100년 이상의 기왕최대가뭄을 나타내고 있는 것으로 판단되었다.

• Nuclear Engineering and Technology
• /
• 제53권2호
• /
• pp.357-367
• /
• 2021

In general, common cause failures (CCFs) have been modeled with the assumption that components within the same group are symmetric. This assumption reduces the number of parameters required for the CCF probability estimation and allows us to use a parametric model, such as the alpha factor model. Although there are various asymmetric conditions in nuclear power plants (NPPs) to be addressed, the traditional CCF models are limited to symmetric conditions. Therefore, this paper proposes the copulabased CCF model to deal with asymmetric as well as symmetric CCFs. Once a joint distribution between the components is constructed using copulas, the proposed model is able to provide the probability of common cause basic events (CCBEs) by formulating a system of equations without symmetry assumptions. In addition, Bayesian inferences for the parameters of the marginal and copula distributions are introduced and Markov Chain Monte Carlo (MCMC) algorithms are employed to sample from the posterior distribution. Three example cases using simulated data, including asymmetry conditions in total failure probabilities and/or dependencies, are illustrated. Consequently, the copula-based CCF model provides appropriate estimates of CCFs for asymmetric conditions. This paper also discusses the limitations and notes on the proposed method.

• Communications for Statistical Applications and Methods
• /
• 제23권6호
• /
• pp.497-515
• /
• 2016

Modern processes often monitor more than one quality characteristic that are referred to as multivariate statistical process control (MSPC) procedures. The MSPC is the most rapidly developing sector of statistical process control and increases interest in the simultaneous inspection of several related quality characteristics. Most multivariate detection procedures based on a multi-normality assumptions are independent, but there are many processes that assume non-normality and correlation. Many multivariate control charts have a lack of related joint distribution. Copulas are tool to construct multivariate modelling and formalizing the dependence structure between random variables and applied in several fields. From copula literature review, there are a few copula to apply in MSPC that have multivariate control charts, and represent a successful tool to identify an out-of-control process. This paper presents various types of copulas modelling for the multivariate control chart. The performance measures of the control chart are the average run length (ARL) and the average number of observations to signal (ANOS). Furthermore, a Monte Carlo simulation is shown when the observations were from an exponential distribution.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제18권1호
• /
• pp.20-32
• /
• 2018

Purpose: The purpose of this study is to set up an anomaly detection criteria for sensor data coming from a motorcycle. Methods: Five sensor values for accelerator pedal, engine rpm, transmission rpm, gear and speed are obtained every 0.02 second from a motorcycle. Exploratory data analysis is used to find any pattern in the data. Traditional process control methods such as X control chart and time series models are fitted to find any anomaly behavior in the data. Finally unsupervised learning algorithm such as k-means clustering is used to find any anomaly spot in the sensor data. Results: According to exploratory data analysis, the distribution of accelerator pedal sensor values is very much skewed to the left. The motorcycle seemed to have been driven in a city at speed less than 45 kilometers per hour. Traditional process control charts such as X control chart fail due to severe autocorrelation in each sensor data. However, ARIMA model found three abnormal points where they are beyond 2 sigma limits in the control chart. We applied a copula based Markov chain to perform statistical process control for correlated observations. Copula based Markov model found anomaly behavior in the similar places as ARIMA model. In an unsupervised learning algorithm, large sensor values get subdivided into two, three, and four disjoint regions. So extreme sensor values are the ones that need to be tracked down for any sign of anomaly behavior in the sensor values. Conclusion: Exploratory data analysis is useful to find any pattern in the sensor data. Process control chart using ARIMA and Joe's copula based Markov model also give warnings near similar places in the data. Unsupervised learning algorithm shows us that the extreme sensor values are the ones that need to be tracked down for any sign of anomaly behavior.

• Journal of the Korean Data and Information Science Society
• /
• 제25권1호
• /
• pp.245-254
• /
• 2014

The traditional methods of simulating daily precipitation have paid little attention to the inherent dependence structure between the total precipitation amount and the precipitation frequency for a fixed period of time. To address this issue, we propose a new simulation algorithm using copula in order to incorporate the dependence into the traditional methods. The algorithm consists of two parts: First, while reflecting the observed dependence, we generate the total precipitation amount (S) and the frequency (N) during the period of interest; then we simulate the daily precipitation whose aggregation matches the pair of (N; S) generated in the first part. Our result shows that the proposed method substantially improves the traditional methods.

• 한국수자원학회논문집
• /
• 제54권12호
• /
• pp.1317-1328
• /
• 2021

본 연구에서는 예측 모델의 정확성이 비교적 높은 월단위의 GloSea5 자료를 기반으로 예측강수량을 편의보정 및 시공간적으로 상세화하여 연속된 일단위 강우량을 모의하고자 하였다. 이를 위하여 GloSea5를 입력자료로 조건부 Copula와 MNHMM 모형을 적용하여 일단위 시계열 강우량 예측정보를 생산할 수 있는 모델링 체계를 제시하였다. 모의결과 동기간의 자료라도 매주 생산되는 결과가 큰 차이를 나타내는 예측강수량의 변동성이 유의하게 개선되었다. 모형 검증에서 모의된 일강수량, 연속강우확률, 연속무강우확률 및 강우일수가 관측자료와 유사한 값으로 모의되는 등 수문모형의 입력자료로써 활용성이 클 것으로 판단된다. 유역 단위에서의 모의된 강수량 계열간의 상관성 차이가 최소 -0.02에서 최대 0.10로 유역의 강우관측소간 상호종속성을 효과적으로 복원되는 등 수문모형의 입력자료로 활용 시 유역의 수문기상학적 반응을 보다 현실적으로 모의가 가능할 것으로 기대된다.

• 한국수자원학회논문집
• /
• 제52권8호
• /
• pp.545-554
• /
• 2019

가뭄평가 시 단일 수문인자를 활용하여 가뭄지수를 산정하고 가뭄의 출현, 심도 및 지속기간 등을 평가하는 것이 일반적이다. 하지만 가뭄은 여러 요인이 복합적인 연관성을 가지며 나타나는 현상이므로 단일인자로 가뭄을 평가하는 경우 불확실성 및 한계가 존재한다. 이에 따라 다양한 수문기상 특성을 고려할 수 있는 가뭄지수의 개발이 지속적으로 요구되고 있다. 본 연구에서는 강우량 및 토양수분을 이용하여 가뭄을 평가하고자 은닉 마코프 모형(Hidden Markov chain Model)기반의 토양수분 모의기법을 통해 과거(1973-2014년) 토양의 수분함량을 모의하였으며, Copula 함수를 활용하여 강우량과 토양수분을 동시에 고려한 합성가뭄지수를 산정하였다. 본 연구에서 제안된 토양수분산정 모델은 다중 회귀 모형의 모의결과와 비교를 통해 모델의 적합성을 검증하였으며, 가뭄의 지속기간과 심도를 고려하여 이변량 빈도해석을 수행하였다. 이변량 빈도해석결과 2015년 전라북도 지역에 발생하였던 가뭄은 약 20년의 재현기간을 갖는 것으로 분석되었다.

• Journal of applied mathematics & informatics
• /
• 제31권5_6호
• /
• pp.711-732
• /
• 2013

In this paper, we are interested in finding explicit numerical formulas to evaluate defaultable bonds prices of firms. For this purpose, we use a default intensity whose values depend on the credit rating of these firms. Each credit rating corresponds to a state of the default intensity. Then, this regime switches as soon as one of the credit rating of a firm also changes. Moreover, this regime switching default intensity model allows us to capture well some market features or economics behaviors. Thus, we obtain two explicit different formulas to evaluate the conditional Laplace transform of a regime switching Cox Ingersoll Ross model. One using the property of semi-affine of the model and the other one using analytic approximation. We conclude by giving some numerical illustrations of these formulas and real data estimation results.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제19권1호
• /
• pp.23-45
• /
• 2015

We consider counterparty risk in CDS rates. To do so, we use a multivariate jump diffusion process for obligors' default intensity, where jumps (i.e. magnitude of contribution of primary events to default intensities) occur simultaneously and their sizes are dependent. For these simultaneous jumps and their sizes, a homogeneous Poisson process. We apply copula-dependent default intensities of multivariate Cox process to derive the joint Laplace transform that provides us with joint survival/default probability and other relevant joint probabilities. For that purpose, the piecewise deterministic Markov process (PDMP) theory developed in [7] and the martingale methodology in [6] are used. We compute survival/default probability using three copulas, which are Farlie-Gumbel-Morgenstern (FGM), Gaussian and Student-t copulas, with exponential marginal distributions. We then apply the results to calculate CDS rates assuming deterministic rate of interest and recovery rate. We also conduct sensitivity analysis for the CDS rates by changing the relevant parameters and provide their figures.