• 벤딩인더스트리
• /
• 제6권1호통권16호
• /
• pp.36-37
• /
• 2006

중국의 자판기 시장은 여전히 가능성의 영역이다. 2008년 북경 올림픽 개최를 계기로 자판기 시장의 큰 성장이 예상되고 있는 반면 자국내 산업 인프라는 제대로 갖추어져 있지 못한 상황이다. 이렇다보니 많은 자판기 관련 해외업체들이 이 시장에 관심을 가지고 시장 진출을 추진하거나 눈독을 들이고 있다. 올 7월 20일부터 22일까지 개최되는 Automatic Vending System & Equipment Exhibition 2006 전시회는 중국시장 진출에 관심을 가지고 있는 업체들에 있어 구미가 당기는 전시회이다. 전시회 참가를 통해 해당회사와 제품에 대한 현지의 반응을 살펴볼 수 있을뿐더러 전반적인 현지 시장조사도 알차게 진행을 할 수 있다. 중국시장 진출을 위한 교두보로 국내 업체도 관심을 가질 필요성이 큰 이번 전시회의 면면을 살펴보기로 하자

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 추계학술대회 논문집
• /
• pp.480-484
• /
• 2004

Despite is product that existent higher hrust engine, ship, vehicles, development equipment and Metal Bearing for plant equipment Cast White Metal Lining Bearing that is Bimetal Bearing standing 2 generation is accomplishing master and servant and this is foreseen to be used widely on industry whole in hereafter but Cast White Metal Bearing need minuteness processing, price competitive power is depending on income from superior another thing area than itself manufacture already in advanced nation to lowdown that the technique is generalized widely.

• 대한안전경영과학회지
• /
• 제2권4호
• /
• pp.1-8
• /
• 2000

Equipment and machine of industrial plant are give effect to mechanical-stress of many working-stop or long time operating. Therefore, to be old and decrepit of every king of equipment. As long time operating equipment period into increase conservation and of repair equipment time is efficacious necessity of utility factor gradually that of productivity of diminution and complete equipment expense of increase. Conservation at special skill working and necessity is that will effectually and complete a period prevention management diagnosis can conservation point at issues at in advance.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 춘계학술대회 논문집
• /
• pp.359-360
• /
• 2012

• 한국BIM학회 논문집
• /
• 제8권1호
• /
• pp.24-32
• /
• 2018

A construction machine guidance system is an assistance system that helps construction equipment operators dig grounds during excavation work at a construction site. This system has long been applied in the overseas countries of the United States, Japan and Europe. However, the system has not been paid much attention in Korea. The objective of this paper is to present a business model for adopting construction machine guidance systems in Korea and evaluate the effectiveness of applying the system to excavation work. The business model in this study shows a new process of applying construction machine guidance system, business stakeholders and revenues, and suggests the benefits to the business stakeholders. A field test of the construction machine guidance system proves that the system can be applied as a tool that can improve the productivity of excavation work. This productivity improvement consequently demonstrates that the business model in this study is a prospective challenge in improving the effectiveness of excavation work at the construction site.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1998년도 춘계학술대회 논문집
• /
• pp.293-297
• /
• 1998

A method for the evaluation and the compensation of the vertical milling machine is presented. The method used a mathmatical model of thermal deformation based on temperatur variations of the machine and the environment. It follows an empirical approach and requires low cost equipment to be applied. According to this study, machine error caused by thermal deformation will be reduced to about 1/6.

• Structural Engineering and Mechanics
• /
• 제49권5호
• /
• pp.645-660
• /
• 2014

This paper presents the design and project of an innovative concept for a Single Point Incremental Forming (SPIF) Machine. Nowadays, equipment currently available for conducting SPIF result mostly from the adaptation of conventional CNC machine tools that results in a limited range of applications in terms of materials and geometries. There is also a limited market supply of equipment dedicated to Incremental Sheet Forming (ISF), that are costly considering low batches, making it unattractive for industry. Other factors impairing a quicker spread of SPIF are large forming times and poor geometrical accuracy of parts. The following sections will depict the development of a new equipment, designed to overcome some of the limitations of machines currently used, allowing the development of a sounding basis for further studies on the particular features of this process. The equipment here described possesses six-degrees-of freedom for the tool, for the sake of improved flexibility in terms of achievable tool-paths and an extra stiffness provided by a parallel kinematics scheme. A brief state of the art about the existing SPIF machines is provided to support the project's guidelines.

• Journal of Electrical Engineering and Technology
• /
• 제11권1호
• /
• pp.192-199
• /
• 2016

With changes in insulated defects, the environment, and so on, new partial discharge (PD) data are highly different from the original samples. It leads to a decrease in on-line recognition rate. The UHF signal and pulse current signal of four kinds of typical artificial defect models in gas insulated switchgear (GIS) are obtained simultaneously by experiment. The relationship map of ultra-high frequency (UHF) cumulative energy and its corresponding apparent discharge of four kinds of typical artificial defect models are plotted. UHF cumulative energy and its corresponding apparent discharge are used as inputs. The support vector machine (SVM) incremental method is constructed. Examples show that the PD SVM incremental method based on simulated annealing (SA) effectively speeds up the data update rate and improves the adaptability of the classifier compared with the original method, in that the total sample is constituted by the old and new data. The PD SVM incremental method is a better pattern recognition technology for PD on-line monitoring.

• 터널과지하공간
• /
• 제23권4호
• /
• pp.271-279
• /
• 2013

본 기술보고에서는 천공장비의 종류와 작동방식에 대해 간략히 소개하였다. 이 중 탑해머 방식의 천공기에 탑재되는 부품 및 세부 기술을 조사하였다. 탑해머 천공기술에 연관된 국내외 기술현황을 분석하고, 국내 기술수준과 선진기술 수준을 비교하였다. 이를 바탕으로 천공 관련 융복합 기술의 연구개발 필요성을 토의하고, 선진국과 기술격차를 줄이기 위한 천공산업의 미래 전략을 제안하였다.

• 대한건축학회논문집:구조계
• /
• 제34권5호
• /
• pp.35-42
• /
• 2018

In order to seek out methods to reduce safety accidents caused by construction machinery and equipment, this study collects data about safety accidents and draws main risk factors by construction from the data, through SNA. It aimed to suggest safety management points to be used in future construction fields, by analyzing risk index of such factors. The finding can be summarized: First, Backhoe Bucket is the risk factor for crash accidents of average workers in earth works; boring machines-maintenance is the risk factor for fall accidents of construction machinery operators in foundation works; bending machine-reinforcing rod processing is the risk factor for jamming accidents of reinforcing rod engineers in frame works; and mobile crane-hook is the risk factor for crash accidents of average workers in lifting works. Second, works can be arranged in turn, according to the risk index: earth, lifting, frame and foundation works. Risk factors can be also arranged according to the risk index: Backhoe in earth works, pile drivers in foundation works, bending machines in frame works and mobile cranes in lifting works. This study has some limits, in that it only analyzed main machinery/equipment, among various kinds of them, for earth, foundation, frame and temporary works (lifting works) and used data collected over three years. Therefore, it is necessary to conduct an analysis using big data, by collecting additional data about a lot of machinery/equipment in future construction fields.