터널과지하공간 (Tunnel and Underground Space)

  • 제23권4호
  • /
  • Pages.271-279
  • /
  • 2013
  • /
  • 1225-1275(pISSN)
  • /
  • 2287-1748(eISSN)
한국암반공학회 (Korean Society for Rock Mechanics and Rock Engineering)
권호 표지
DOI QR코드

DOI QR Code

Top-Hammer 천공기 국내외 기술동향 분석

Trend Analysis of Drilling Technology for Top-Hammer Drilling Machine

  • 송창헌 (한국생산기술연구원 건설기계부품연구그룹) ;
  • 권기범 (한국생산기술연구원 건설기계부품연구그룹) ;
  • 신대영 (한국생산기술연구원 대경본부 연구부문) ;
  • 황운규 (에버다임 선행개발팀) ;
  • 임종혁 ((주)에버다임 드릴사업본부) ;
  • 조정우 (한국생산기술연구원 건설기계부품연구그룹)
  • 투고 : 2013.08.05
  • 심사 : 2013.08.27
  • 발행 : 2013.08.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

본 기술보고에서는 천공장비의 종류와 작동방식에 대해 간략히 소개하였다. 이 중 탑해머 방식의 천공기에 탑재되는 부품 및 세부 기술을 조사하였다. 탑해머 천공기술에 연관된 국내외 기술현황을 분석하고, 국내 기술수준과 선진기술 수준을 비교하였다. 이를 바탕으로 천공 관련 융복합 기술의 연구개발 필요성을 토의하고, 선진국과 기술격차를 줄이기 위한 천공산업의 미래 전략을 제안하였다.

This report introduced the types of drilling equipment and their operation mechanisms. The state of the art technologies of the Top-hammer drill equipment were investigated and the technology level of Korean drill industry was compared to that of the advanced country. Based on the investigation, the necessity of fusion research and development in the Korean drilling technology and industry was discussed, and the future strategy to catch up with the advanced technology was suggested.

키워드

참고문헌

  1. Atlas Copco, 2006, Surface Drilling in Quarry and Construction.
  2. Atlas Copco, 2013, Technical specification; Face drilling rigs, Boomer E3 C, pp. 1-4.
  3. Bu, C., Qu, Y., Cheng, Z., Liu, B., 2009, Numerical simulation of impact on pneumatic DTH hammer percussive drilling, Journal of Earth Science, 20.5, 868-878. https://doi.org/10.1007/s12583-009-0073-5
  4. Franca, L., 2011, A bit-rock interaction model for rotary-percussive drilling, Int. J. Rock Mech. Min. Sci. Vol. 48, 827-835. https://doi.org/10.1016/j.ijrmms.2011.05.007
  5. Geogeny Consultants Group Inc., 2006, TunDesign 4; Design & modeling program for tunnel blasting.
  6. Hustruid, W.A. and Fairhurst, C., 1971(a), A theoretical and experimental study of the percussive drilling of rock, Part I-Theory of percussive drilling, Int. J. Rock Mech. Min. Sci. Vol. 8, 311-333. https://doi.org/10.1016/0148-9062(71)90045-3
  7. Hustruid, W.A. and Fairhurst, C., 1971(b), A theoretical and experimental study of the percussive drilling of rock, PART II-Force-penetration and specific energy determinations, Int. J. Rock Mech. Min. Sci. Vol. 8, 335-356. https://doi.org/10.1016/0148-9062(71)90046-5
  8. Hustruid, W.A. and Fairhurst, C., 1972(a), A theoretical and experimental study of the percussive drilling of rock, PART III-Experimental verification of the mathematical theory, Int. J. Rock Mech. Min. Sci. Vol. 9, 417-429. https://doi.org/10.1016/0148-9062(72)90006-X
  9. Hustruid, W.A. and Fairhurst, C., 1972(b) A theoretical and experimental study of the percussive drilling of rock, PART IV-Application of the model to actual percussion drilling, Int. J. Rock Mech. Min. Sci. Vol. 9, 431-449. https://doi.org/10.1016/0148-9062(72)90007-1
  10. Korea Evaluation Institute of Industrial Technology, 2012, 굴착용 천공장비의 기술개발동향 및 건설기계산업의 발전방향, KEIT PD Issue report, 12.10(2012. Nov.), pp. 33-58.
  11. Kwon, K. B., Song, C. H., Park, J. Y., Shin, D. Y., and Cho, J. W., 2013, Investigation of drilling efficiency using percussion test of drill bit, International Symposium on Green Manufacturing and Applications (ISGMA 2013), June 26th, 2013. P-C-Machining 19.
  12. Kwon, K. B., Song, C. H., Park, J. Y., Shin, D. Y., Cho, J. W., and Cho, S, H., 2013, Rock Fragmentation Assessment of a Drill Bit by Hopkinson Bar Percussion Test, Korean Society for Rock Mech., Tunnel & Underground Space, 23.1, 42-53. https://doi.org/10.7474/TUS.2013.23.1.042
  13. Kim, K. Y., Kim, C. Y., Kim, K. S., 2008, Assessment of Hydraulic Drilling Data on Homogeneous Rock Mass, Korean Society for Rock Mech., Tunnel & Underground Space, 18.6, 480-490.
  14. Shin, D. Y., Song, C. H., 2012, Performance Optimization of Down-the-Hole Hammer Using Taguchi Method, Transactions of the Korean Society of Mechanical Engineers-A 36.1, 109-116. https://doi.org/10.3795/KSME-A.2012.36.1.109
  15. Ministry of Trade, Industry and Energy, 2013, 지식경제 부품소재기술개발사업 기술혁신사업,"굴착용 천공드릴 모듈", 최종 연구보고서
  16. Ministry of Knowledge Economy, 2010, 지식경제 부품소재기술개발사업, "굴착용 천공드릴 모듈", 지식경제 기술혁신사업 계획서
  17. Ministry of Knowledge Economy, 2012, 지식경제 부품소재기술개발사업 기술혁신사업,"굴착용 천공드릴 모듈", 2차년도 연구보고서
  18. Oh, J. Y., Lee, G. H., Song, C. S., 2011, A Study on the Analysis of Hydraulic Circuit of a Rockdrill Drifter, Proceedings of the KFPS 2011 Spring Conference, 70-75.
  19. Song, C. H., Kwon, K. B., Park, J. Y., Shin, D. Y., and Cho, J. W, 2012, Optimization of Flow Path of Drill Bit using CFD Simulation, Korean Society for Rock Mech., Tunnel & Underground Space, 22.4, 257-265. https://doi.org/10.7474/TUS.2012.22.4.257
  20. The freedonia Group Inc., 2009, Industry Study 2562: World Mining Equipment.

피인용 문헌

  1. Analytic Hierarchy Process Analysis on Correlation Between Drilling Error and Blasting Accuracy vol.24, pp.5, 2014, https://doi.org/10.7474/TUS.2014.24.5.386
  2. Development of lab-scale rock drill apparatus for testing performance of a drill bit vol.16, pp.7, 2015, https://doi.org/10.1007/s12541-015-0185-z