• Journal of Ocean Engineering and Technology
• /
• v.26 no.1
• /
• pp.60-63
• /
• 2012

The accident risks in the marine environment are increasing because of the tendency to build faster and larger ships. To secure ship safety, risk-based ship design (RBSD) was recently suggested based on a formal safety assessment (FSA). In the process of RBSD, a ship designer decides which risk reduction option is most cost-effective in the design stage using a cost-benefit analysis (CBA). There are three dimensions of risk in this CBA: fatality, environment, and asset. In this paper, we present an approach to estimate the environmental costs based on the size of an oil tanker involved in an accident using a neural network. An appropriate neural network model is suggested for the estimation,and the neural network is trained using IOPCF data. Finally,the learned neural network is compared with the cost regression equation by IMO MEPC 62/WP.13 (2011).

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.2
• /
• pp.123-132
• /
• 2014

The maritime sector is advancing with dedicated endeavor to reduce greenhouse gas in addressing issues with regards to global warming. Since 01 January 2013, the International Maritime Organization (IMO) regulation mandatory requirement for Energy Efficiency Design Index (EEDI) has been in place and should be satisfied by newly-built ships of more than 400 gross tonnage and the Ship Energy Efficiency Management Plan (SEEMP) for all ships type. Therefore, compliance to this necessitates planning during the design stage whereas verification can be carried-out through an acceptable method during sea trial. The MEPC-approved 2013 guidance, ISO 15016 and ISO 19019 on EEDI serves the purpose for calculation and verification of attained EEDI value. Individual ships EEDI value should be lower than the required value set by these regulations. The key factors for EEDI verification are power and speed assessment and their synchronization. The shaft power can be measured by telemeter system using strain gage during sea trial. However, calibration of shaft power onboard condition is complicated. Hence, it relies only on proficient technology that operates within the permitted ISO allowance. On the other hand, the ship speed can be measured and calibrated by differential ground positioning system (DGPS). An actual test on a newly-built vessel was carried out to assess the correlation of power and speed. The Energy-efficiency Design Index or Operational Indicator Monitoring System (EDiMS) software developed by the Dynamics Laboratory-Mokpo Maritime University (DL-MMU) and Green Marine Equipment RIS Center (GMERC) of Mokpo Maritime University was utilized for this investigation. In addition, the software can continuously monitor air emission and is a useful tool for inventory and ship energy management plan. This paper introduces the synchronization and identification method between shaft power and ship speed for EEDI verification in accordance with the ISO guidance.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.15 no.2
• /
• pp.111-117
• /
• 2009

IMO is treating various and numerous agenda with time, and the contents of agenda have been tending to achieve international standardization for details of technology, for example GBS(Goal based new ship construction standards), PSPC(Performance Standards of Protective Coating), LRIT(Long-Range Identification and Tracking of Ships), etc. This paper presents the latest agenda trend of IMO committees and analyzes the ROK's activities in response to IMO committees. In the result of analysis, ROK lacks in performance ability as a A-category council member as well as infrastructure to support the government activities in IMO continuously. Therefore, ROK should be conscious of policy approaches to international maritime tendency and needs to complete the internal/external infrastructure which leads the international maritime policy.

• Journal of the Society of Naval Architects of Korea
• /
• v.53 no.1
• /
• pp.37-44
• /
• 2016

Recently researchers are conducting a lot of research related to EEDI in order to satisfy IMO resolution MEPC. Especially they are interested in design of energy saving device. This paper is to design the asymmetric pre-swirl stator for 160K LNG carrier in order to reduce energy. Two types of the asymmetric pre-swirl stator are taken into account; constant and variable pitch angle stators. “constant” and “variable” mean state that the pitch of stators change by radius. The dimensions of the stators are initially determined using potential-flow code. The propulsion performances of the stators are predicted using viscous-flow code. The model test is carried out in towing tank in PNU. Prediction of ship performance generally follow ITTC recommended. Ship wake prediction was done by two method, ITTC 1978 and ITTC 1999. Therefore propulsion performances were compared ITTC 1978 with ITTC 1999 methods. Comparison components are delivered power and thrust deduction coefficient of the model. Final pre-swirl stator is selected by comparing experiment and CFD.

• Journal of Fisheries and Marine Sciences Education
• /
• v.28 no.6
• /
• pp.1602-1613
• /
• 2016

Since Ballast Water Management Convention has been adopted, Ballast Water Management Convention is not effected yet. This convention will only enter into force 12 months after its ratification by 30 states, collectively representing 35% of world merchant shipping tonnnage. Morocco, Indonesia and Ghana have ratified this convention during last 29th IMO Assembly meeting which was held in November 2015. In 2016, Belgium, Fiji, Saint Lucia and Peru have become the latest countries to ratify the convention. As of now, 51 states and 34.87% combined merchant fleets are being calculated. BWM convention will be applied to not only new ships but also, existing ships after it is effected. Thus, existing vessel will be retrofitted a Ballast Water Treatment System according to D-2 Requirement until first IOPP nenewal survey after date of entry into force of the convention. Currently, about 65 BWTSs certified by Administration will be reported to IMO, even type of BWTSs is very various. Thus, a risk of each BWTS can be existed, and this existed risk can be also effected to ship's crew safety and protection of ship's own property. Therefore, we have evaluated a risk assessment for an existing vessel retrofitting an ultra violet type Ballast Water Treatment System which is mostly developed in the world. And we described the procedure of selecting a sample vessel, consequently, bulk carrier is selected because this vessel kind is mostly charged in the world. Especially, DWT 175K size is selected. Risk Assessment is using a HAZID and HAZOP method, evaluation method is referred to IMO Document "Considerated test of the Guidelines for Formal Safety Assessment (FSA) for use in the IMO rule-marking process(MSC/Circ.1203-MEPC/Circ.392)". The Risk Assessment Section is decided to 3 Nodes, Consequently, total risks have evaluated 51 items.

• Journal of Fisheries and Marine Sciences Education
• /
• v.29 no.2
• /
• pp.503-512
• /
• 2017

Over the past few years, as maritime trade and traffic were highly expanding, problem of invasive species via ballast water have been raised. In 1988, Canada and Australia had firstly experience that unexpected and hazardous species were observed on their own sea, they have issued the problem to MEPC under the IMO. At the end of many years of discussion, on the diplomatic conference in 13 Feb. 2004, "International Convention for the Control and Management of Ballast Water and Sediments of the Ship" was adopted. Requirements for entering into force of this Convention is that 30 countries ratify and world merchant marine fleet is more than 35% and BWM Convention will be effected after 12months from date satisfying conditions. With Finland ratifying the BWM Convention on 8 Sep. 2016, the fleet amounted to 35.1441% and ratification country became 52 countries. Therefore, after 12month, BWM Convention will be formally effected on 8 Sep. 2017. Ballast Water Treatment System is to be fitted in new ships as well as existing ships. Thus, there are concerns of ship owners to be suitably installed a variety typed BWTS in many kinds of vessels. As approaching for resolving these problems, engineering analysis was carried out research studies and detailed design to analyze to optimal installation space for retrofitting a BWTS using 3D Scanning method, targeting representative DWT 180K Bulk carrier of dry cargo vessels charged more 40% on worldwide vessel and mainly two type BWTS as electrolysis treatment type and ultra violet treatment type. Optimal design of 3D Scanning technology was applied to analyze four step process and the overall conclusion was described in this paper.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2003.05a
• /
• pp.206-211
• /
• 2003

Bans on TBT based antifouling paints have been drafted since 1998 by meeting 42, 43, 45 and 46 for the MEPC(Marine Environmental Protection Committee) of the International Marine Organization, and decided finally at a Diplomatic Conference of the IMO in October 2001. It was a key issue that there should be a global prohibition on the presence of organo-tin compounds in ships by 1 Jan. 2008. TBT Paint Waste from ship happens by vast quantity since 2003. This paper suggests a method to design Treatment System for TBT Paint Waste from Ship. The result of measurement in pyrolysis system were removal rate on 99％. at hight temperature in 1000$^{\circ}C$ and reaction time 1hr. TBT removal was more that 99％.

• Journal of Navigation and Port Research
• /
• v.35 no.5
• /
• pp.371-380
• /
• 2011

Traditionally, UNCLOS stipulates that States have the obligation and responsibility to protect and preserve the marine environment and exercise their rights in Principle of Non-Discrimination with respect to foreign ships visiting to port states. UNFCCC and Kyoto protocol established Common but Differentiated Responsibility as the basis which is established on the historic responsibility. The principle in which IMO is presently developing the regulations of Green House Gas emitted from ships is contradict with the principle of UNFCCC regime. In this paper, the development and the principle of UNFCCC and Kyoto protocol is surveyed and it provides the tendency of the IMO activities regarding GHG emission from ships. Also, through consideration of the problems and restrictions drawn from comparison between two principles, the conclusion suggests the fundamental theory and implementation means in order to carry out the purpose of IMO regulations in accordance with the principles of UNCLOS and IMO Convention.

• Journal of Navigation and Port Research
• /
• v.27 no.4
• /
• pp.449-454
• /
• 2003

Bans on TBT based antifouling paints have been drafted since 1998 by meetings 42, 43, 45 and 46 for the MEPC(Marine Environmental Protection Committee) of the international Maritime Organization, and decided finally at a Diplomatic Conference of the IMO in October 2001. It was a key issue that there should be a global prohibition on the presence of organo-tin compounds in ships by 1 Jan. 2008. TBT Paint Wastes from ship have been produced by vast quantity since 2003. This paper suggests a method to design Treatment System for TBT Paint Waste from Ship. The organotion compound was dissolved by heating, and the organic matters was oxidized and turned into inorganotins, then they were stabilized in the end. At 500^{\circ}C$, the organotin compound which heated for one hour was removed by 58%, and in 1000^{\circ}C$ the organotin compound was treated by 99.9% after and hour of heating treatment.

• Proceedings of KOSOMES biannual meeting
• /
• 2008.05a
• /
• pp.5-10
• /
• 2008

In recent years, the major interest in international environmental laws has focused on the ways to secure observation of the laws. For the implementation and compliance of international marine environmental convention, the new sequence of developing convention has been sdopted. The main convention is adopted in a form of 'Framework Convention' and the details are expressed in the Annex and/or Guidelines of the convention for the purpose of conveniense of adoption and to secure the observation of the convention And the Annexes or Guidelines are amended, revised and newly adopted continuously. Therefore this study is to analyze the tendency of sequence for developing new convention, which will help understanding one particular international marine environmental convention as a whole.