• 대한간호학회지
• /
• 제42권3호
• /
• pp.405-413
• /
• 2012

Purpose: The aim of this study was to explore the effects of A-solution on halitosis and oral status in preoperative NPO patients. Methods: A nonequivalent control group, non-synchronized pretest-posttest design was used in this study. The participants in this study were 66 patients who were admitted for gynecologic surgery. The experimental treatment was to give oral gargling with A-solution, blended essential oils and diluted with distilled water. To identify the experimental treatment effects, halitosis, salivary pH, and oral status were measured by a portable halitosis detector, visual analogue scale, Bromo Thymol Blue (BTB), Bromo Cresol Purple (BCP) test paper and oral assessment guide. Data were analyzed using $X^2$-test, t-test with PASW 18.0 version. Results: Participants were homogeneous before experimental treatment. Objective halitosis in the experimental group, measured by a portable halitosis detector (t=-8.34, p<.001) was significantly lower than the control group. Subjective halitosis was significantly lower in the experimental group (t=-9.29, p<.001). Salivary pH was significantly different between two groups (t=8.81, p<.001). Oral status was significantly better in the experimental group (t=-13.31, p<.001). Conclusion: These findings indicate that oral gargling using A-solution is effective in reducing patient halitosis, and improving oral status.

• 한국염색가공학회지
• /
• 제17권1호
• /
• pp.30-37
• /
• 2005

The tensile properties, acetic acid solubility and degree of swelling in distilled water of cellulose/chitosan and sericin/chitosan film blended by mixing chitosan acetic acid solution with cellulose solution or sericin solution were investigated and the effect of crosslinking agent on solubility and degree of swelling were also considered. From the experimental results, the model of intermolecular bond is proposed. Tensile modulus of 100% cellulose film is high but the tensile strength and elongation are low. The elongation of 100% chitosan film is high but tensile modulus and strength is low. But it is possible to make film having same or higher tensile strength and modulus compared to that of 100% cellulose film by mixing cellulose and chitosan or by mixing sericin and chitosan. Chitosan is solved in 5vol % acetic acid solution but cellulose and sericin are not solved. Degree of swelling of chitosan in distilled water is higher than that of cellulose and sericin. Lower than 40wt% chitosan content, the solubility of cellulose/chitosan film in 5vol % acetic acid solution shows lower expected value but higher in case of sericin/chitosan film.

• Bulletin of the Korean Chemical Society
• /
• 제30권7호
• /
• pp.1521-1525
• /
• 2009

Thermosensitive block copolymers of ethylene oxide and N-isopropylacrylamide (NIPAM) were synthesized. A five armed star shape oligo(ethylene oxide) initiator with a cyclotriphosphazene core was prepared and used for the atom transfer radical polymerization (ATRP) of NIPAM. The lower critical solution temperatures (LCSTs) of the copolymers were 36 to 46 ${^{\circ}C}$, higher than that of PNIPAM (32 ${^{\circ}C}$), depending on their molecular weights. The copolymers were soluble in water below the LCSTs but formed micelles above the LCSTs. The thermosensitive micellization behaviors of the polymers were investigated by fluorescence spectroscopy. With increasing the temperature of an aqueous solution of P2 and pyrene above the LCST, the peak of 333 nm red-shifted to appear around 339 nm and its intensity increased significantly, indicating the micelle formation. The transfer of pyrene into the micelles was also confirmed by a confocal laser scanning microscope. The fluorescence image obtained from P2 in an aqueous pyrene solution exhibited a green emission resulting from the pyrene transferred into the micelles. Salt effects on the solubility of the copolymers in an aqueous solution were investigated. The LCST of P2 decreased sharply as the concentration of sodium chloride increased, while decreased slowly with potassium chloride.

• 한국농공학회지
• /
• 제15권4호
• /
• pp.3137-3146
• /
• 1973

This study was to investigate the effects of compaction, compressive strength and Atterberg limits in accordance with the temperatures changes. It was conducted on four soils-KJ, JJ, MH, SS-at temperatures of -1, 1, 3, 5, 7, 10, 15, 19, $22^{\circ}C$. These tests were obtained the maximum dry density and the optimum moisture content of four soils in accordance with temperature changes by using distilled water and $CaCl_2$ 10% solution, and were put to the compressive strength tests on remolded specimens of soils compacted at the optimum moisture content. The result of the study can be summarized as follows; The maximum dry density increased with an increase in temperature, and the use of $CaCl_2$ 10% solution had higher maximum dry density than distilled water. The optimum moisture content decreased with an increase in temperature, and the use of $CaCl_2$ 10% solution had lower optimum moisture content than distilled water. The maximum compressive strength was shown high peak from $7^{\circ}C\;to\;15^{\circ}C$, and the use of $CaCl_2$ 10% solution had higher maximum compressive strength than distilled water. The liquid limit and plasticity index decreased with an increased in temperature. It is estimated that the use of $CaCl_2$ 10% solution can lower the minimum compacted temperature from $2^{\circ}C\;to\;4^{\circ}C$ in low temperature.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제18권7호
• /
• pp.63-72
• /
• 2013

This study estimated stabilization efficiency of As and heavy metal contaminated agricultural soil in abandoned mine through pot experiment. Also contaminants uptake of plant (lettuce) was compared as function of amendment (limestone, steelmaking slag and the mixture of these) addition. In soil solution analysis, concentration of contaminants in soil solutions which added limestone or steelmaking slag were lower than that of the mixture. Especially in As analysis, concentration with 5% (wt) addition of steelmaking slag showed the lowest value among those with other amendments. This seems that As stabilization happens through Fe adsorption during precipitation of Fe by pH increasing. Leachability of As in stabilized soil by TCLP was represented similar result with soil solution analysis. However leachability of heavy metals in stabilized soil was similar with that of non-stabilized soil due to dissolution of alkali precipitant by weak acid. Contaminants uptake rate by plant was also lower when limestone or steelmaking slag was used. However this study revealed that concentration of contaminants in soil solution didn't affect to the uptake rate of plant directly. Because lower $R^2$ (coefficient of determination) was represented in linear regression analysis between soil solution and plant.

• 한국지반공학회논문집
• /
• 제27권5호
• /
• pp.45-59
• /
• 2011

본 논문은 비배수 점토지반에서 얕은 기초의 지지력계수인 $N_c$값을 도식적 상계법과 하계법을 이용해 이론적으로 유도하고 이를 Prandtl(1921)이 제안한 값과 비교하였다. 그 결과, 상계법과 하계법이 일치하는 값이 Prandtl(1921)이 제안한 $N_c$ 값이 5.14임을 확인하였으며, 유한요소해석 결과도 얕은 기초가 파괴하중에 도달할 때의 $N_c$가 5.14로 나타났다. 이러한 유한요소해석 결과는 유한요소 형태(finite e1ement type)와 수, 그리고 증분수(increments)에 크게 의존한다. 본 연구를 통해 상계법에서 구한 값과 하계법에서 구한 값이 서로 일치할 때 비로소 이론적으로 정확한 값임을 정의할 수 있으나, 일치하는 값을 유도하는 일은 매우 어려우며 일반적으로 상계법의 해와 하계법 해 사이에 존재한다고 볼 수 있다.

• International Journal of Aeronautical and Space Sciences
• /
• 제14권2호
• /
• pp.112-121
• /
• 2013

An approach for composing a performance optimized computational code is suggested for the latest microprocessors. The concept of the code optimization, termed localization, is maximizing the utilization of the second level cache that is common to all the latest computer systems, and minimizing the access to system main memory. In this study, the localized optimization of the LU-SGS (Lower-Upper Symmetric Gauss-Seidel) code for the solution of fluid dynamic equations was carried out in three different levels and tested for several different microprocessor architectures widely used these days. The test results of localized optimization showed a remarkable performance gain of more than two times faster solution than the baseline algorithm for producing exactly the same solution on the same computer system.

• 한국경영과학회지
• /
• 제23권2호
• /
• pp.1-13
• /
• 1998

The purpose of this paper is to formulate the three-dimensional loading problem and to develop an exact algorithm. The three-dimensional loading problem is not only to load as many boxes as possible, but also to ensure load stability. In this Paper, we propose formulation by zero-one integer programming. Further we propose as an algorithm the branch-and-bound enforced by efficient bounding criteria. As an upper bound, we use the solution of the Lagrangean relaxation problem which relaxes constraints of zero-one IP, and as a lower bound, we use a heuristic solution induced by the solution of the Lagrangean relaxation problem. Last, we show computational experiments on convergency of upper and lower bounds.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제15권2호
• /
• pp.249-254
• /
• 2015

Solution-derived amorphous indium-gallium-zinc oxide (a-IGZO) thin-film-transistor (TFTs) were developed using a microwave irradiation treatment at low process temperature below $300^{\circ}C$. Compared to conventional furnace-annealing, the a-IGZO TFTs annealed by microwave irradiation exhibited better electrical characteristics in terms of field effect mobility, SS, and on/off current ratio, although the annealing temperature of microwave irradiation is much lower than that of furnace annealing. The microwave irradiated TFTs showed a smaller $V_{th}$ shift under the positive gate bias stress (PGBS) and negative gate bias stress (NGBS) tests owing to a lower ratio of oxygen vacancies, surface absorbed oxygen molecules, and reduced interface trapping in a-IGZO. Therefore, microwave irradiation is very promising to low-temperature process.

• Journal of applied mathematics & informatics
• /
• 제27권3_4호
• /
• pp.475-487
• /
• 2009

This paper studies the iteration method of solving a type of second-order three-point boundary value problem with non-linear term f, which depends on the first order derivative. By using the upper and lower method, we obtain the sufficient conditions of the existence and uniqueness of solutions. Furthermore, the monotone iterative sequences generated by the method contribute to the minimum solution and the maximum solution. And the error estimate formula is also given under the condition of unique solution. We apply the solving process to a special boundary value problem, and the result is interesting.