• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.12
• /
• pp.146-152
• /
• 2016

The purposes of this study were to investigate the effects of professional soldiers' family healthiness on the organizational effectiveness of the military and test for any differences in the structural modeling path caused by the mediating effects of empowerment depending on whether they lived with their families or not. Data were collected with a self-administered survey distributed to 480 professional soldiers after the approval of the Ministry of National Defense. The data collected were then analyzed using descriptive statistics, structural equation modeling, and multi-group analysis. The analysis results show that the family healthiness of all of the professional soldiers had direct or indirect effects on their organizational effectiveness via empowerment and that family healthiness was a variable with a very large explanatory power for organizational effectiveness. Both family healthiness and empowerment had effects on the organizational effectiveness of the solders that were living with their families and those who lived separately from their families. The levels of family healthiness, empowerment, and organizational effectiveness were all high among the professional soldiers that were living with their families and all low among those who were not. Increasing the family healthiness and empowerment was found to enhance the organizational effectiveness in all of the models, and a higher organizational effectiveness would be expected from professional soldiers living with their families. These findings led to a proposal that various plans should be prepared to help professional soldiers live with their families and provide them with family welfare support.

• The Journal of Advanced Prosthodontics
• /
• v.5 no.4
• /
• pp.452-456
• /
• 2013

PURPOSE. The aim of this study was to evaluate the repeatability of the digitizing of silicon rubber impressions of abutment teeth by using a white light scanner and compare differences in repeatability between different abutment teeth types. MATERIALS AND METHODS. Silicon rubber impressions of a canine, premolar, and molar tooth were each digitized 8 times using a white light scanner, and 3D surface models were created using the point clouds. The size of any discrepancy between each model and the corresponding reference tooth were measured, and the distribution of these values was analyzed by an inspection software (PowerInspect 2012, Delcamplc., Birmingham, UK). Absolute values of discrepancies were analyzed by the Kruskal-Wallis test and multiple comparisons (${\alpha}$=.05). RESULTS. The discrepancy between the impressions for the canine, premolar, and molar teeth were $6.3{\mu}m$ (95% confidence interval [CI], 5.4-7.2), $6.4{\mu}m$ (95% CI, 5.3-7.6), and $8.9{\mu}m$ (95% CI, 8.2-9.5), respectively. The discrepancy of the molar tooth impression was significantly higher than that of other tooth types. The largest variation (as mean [SD]) in discrepancies was seen in the premolar tooth impression scans: $26.7{\mu}m$ (95% CI, 19.7-33.8); followed by canine and molar teeth impressions, $16.3{\mu}m$ (95% CI, 15.3- 17.3), and $14.0{\mu}m$ (95% CI, 12.3-15.7), respectively. CONCLUSION. The repeatability of the digitizing abutment teeth's silicon rubber impressions by using a white light scanner was improved compared to that with a laser scanner, showing only a low mean discrepancy between $6.3{\mu}m$ and $8.9{\mu}m$, which was in an clinically acceptable range. Premolar impression with a long and narrow shape showed a significantly larger discrepancy than canine and molar impressions. Further work is needed to increase the digitizing performance of the white light scanner for deep and slender impressions.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.6
• /
• pp.78-86
• /
• 2014

In this paper, a novel intensity-based fiber optic vibration sensor using a mass-spring structure, which consists of four serpentine flexure springs and a rectangular aperture within a proof mass, is proposed and its feasibility test is given by the simulation and experiment. An optical collimator is used to broaden the beam which is modulated by the displacement of the rectangular aperture within the proof mass. The proposed fiber optic vibration sensor has been analyzed and designed in terms of the optical and mechanical parts. A mechanical structure has been designed using theoretical analysis, mathematical modeling, and 3D FEM (Finite Element Method) simulation. The relative aperture displacement according to the base vibration is given using FEM simulation, while the output beam power according to the relative displacement is measured by experiment. The simulated sensor sensitivity of $15.731{\mu}W/G$ and detection range of ${\pm}6.087G$ are given. By using reference signal, the output signal with 0.75% relative error shows a good stability. The proposed vibration sensor structure has the advantages of a simple structure, low cost, and multi-point sensing characteristic. It also has the potential to be made by MEMS (Micro-Electro-Mechanical System) technology.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.4 no.2
• /
• pp.208-223
• /
• 1994

The purpose of this study was to evaluate the efficiency of diffusive(or passive) sampler in measuring airbone organic solvents. Diffusive samplers are generally simple in construction and do not require power for operation. The efficiency of the diffusive samplers has not sufficiently been investigated in Korea. Three types of samplers were studied in this study. The sampling and analytical results by passive samplers were compared with results by charcoal tube method recommended by NIOSH(National Institute for Occupational Safty and Health). The following characteristics are identified and studied as critical to the performance passive monitors; recovery, reverse diffusion, storage stability, accuracy and precision, face velocity and humidity, n-Hexane, TCE(trichloroethylene) and toluene were used as test vapors. A dynamic vapor exposure system consisting of organic vapor generator and sampling chamber for evaluating diffusive samplers are made. The results of the study are summarized as follows. 1. NIOSH recommands that the overall accuracy of a sampling method in the range of 0.5 to 2.0 times the occupational health standard should be ${\pm}25$ percent for 95 percent confidence level. Among three types of diffusive samplers, sampler A has permeation membrane and samplers Band C have diffusive areas, samplers A and B met the criterion that overall accuracy for 95% confidence level of the samplers were within ${\pm}25$ percent of the reference value. Sampler C had overall accuracy ${\pm}9.6%$ and ${\pm}11.8%$ in hexane and TCE, respectively. The concentration of toluene was overestimated in sampler C with overall accuracy of ${\pm}43.9%$. 2. The desorption efficiencies of diffusive samplers were 96-107%. 3. There was no significant sampe loss during four weeks of storage both with and without refrigeration. 4. There was no significant reverse diffusion, when the samplers were exposure to clean air for 2 hours after sampling for 2 hours at the level of 2 TLY. 5. In case of 8 hours sampling, relative differences(RD) of concentrations between charcoal tube method and diffusive method were 15-39%, 13-46%, and 4-35% for sampler A, B and C, respectively. The performance was poor in 8 hours sampling for multiple substance monitors. 6. At high velocity(100 cm/sec), samplers B and C overestimated the concentrations of organic vapors, and sampler A with permeation membrance gave better results. 7. At 80% relative humidity, samplers showed no siginificant effect. Low humidity also did not affect the diffusive samplers.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.8
• /
• pp.74-85
• /
• 2015

PCI Express is a well-known and widely used de-facto system bus standard for connecting among a processor and IO devices. PCI Express is originated from old PCI standard, and its most of applications are limited to be used within a PC or server system. But, because of its fast speed, low power consumption, and good protocol efficiency, it is considered as one of a good candidate for an alternate system interconnect for many years. In this paper, we present design, implementation and early evaluation of an alternate system interconnect by utilizing PCI Express. The developed alternate system interconnect using PCI Express (named PCIeLINK) utilizes non-transparent bridging (NTB) technic which generally used in fail-over system in PCI and PCI Express. By using NTB technic, PCI Express device can be extended to outside of a system without electrical and logical problems arising during system boot and enumeration. To build up an alternate system interconnect, we designed and implemented a network interface card having multiple PCI Express ${\times}4$ connections (theoretically 20 Gbps) and tested, The early test results revealed that an ${\times}4$ port in the card showed 8.6 Gbps peak performance for bulk transmission and 5.1 Gbps peak for normal TCP/IP transfer.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.10
• /
• pp.82-90
• /
• 2011

Because of the development of Smart phone devices, the demands of high performance FPU(Floating-point Unit) becomes increasing. Therefore, we propose the high-speed single-/double-precision FPU design that includes an elementary add/sub unit and improved multiplier and compare and convert units. The most commonly used add/sub unit is optimized by the parallel rounding unit. The matrix operation is used in complex calculation something like a graphic calculation. We designed the Multiply-Add Fused(MAF) instead of multiplier to calculate the matrix more quickly. The branch instruction that is decided by the compare operation is very frequently used in various programs. We bypassed the result of the compare operation before all the pipeline processes ended to decrease the total execution time. And we included additional convert operations that are added in IEEE754-2008 standard. To verify our RTL designs, we chose four hundred thousand test vectors by weighted random method and simulated each unit. The FPU that was synthesized by Samsung's 45-nm low-power process satisfied the 600-MHz operation frequency. And we confirm a reduction in area by comparing the improved FPU with the existing FPU.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.2
• /
• pp.455-464
• /
• 2015

Investments into existing cultural facilities are determined based on administrative district-based indices like population and area. Such macro judgment indices, however, fail to consider accessibility of cultural facilities from neighboring administrative districts and thus create problems including wasted budgets and duplicated investments. More recently, the government has made it a goal to increase the level of citizen awareness of these facilities, but achieving this requires the integration of neighboring administrative districts such that characteristics including transportation network and buildings are reflected in a comprehensive manner. This research therefore looks into Urban Network Analysis (UNA) as a means to investigate accessibility of cultural facilities. Use of UNA will make it possible to analyze the transportation network as well as building distribution, explained by building density, settled population, and other important building factors, in tandem, leading to the concentration of cultural facilities and the surrounding economic district being more properly reflected, and thus allowing for greater explanatory power in determining the level of accessibility. To test this, four target research districts were chosen from within the Gyeonggi Province and analyzed in terms of the accessibility of their everyday cultural facilities. Of the four districts of Gunpo, Anyang, Uiwang, and Gwacheon, accessibility of the first two districts, was found to be high, while accessibility was found to be relatively low for the latter two districts. This finding indicates that cultural facilities investments should be concentrated in the districts of Gunpo and Anyang.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.708-714
• /
• 2019

This study investigated the effect of emotional leadership on the job satisfaction of dental hygienists. Therefore, we tried to determine a way to improve job satisfaction through emotional leadership, which is one of the skills that dental hygienists should have. The study subjects were 237 dental hygienists working in dental clinics in Jeollabuk-do from April 16, 2018 to April 28, 2018. The data was analyzed using the SPSS 12.0 program. The following results were obtained. The emotional leadership of the subjects was lowest for leadership ability (3.15), and the average job satisfaction was 3.43. Salary levels were low, ranging from 2.49 to 2.98. The final academic achievement and dental career had significant influences on emotional leadership (p<0.05). Marital status, self-cognition ability, self-management ability, and relationship management ability influenced the subjects' job satisfaction. The explanatory power of the multiple regression model was 26.5% and the validity of the model was statistically significant (p<0.05). Based on the above results, it was determined that self-recognition ability, self-management ability and relationship management ability of emotional leadership are all highly related to the job satisfaction of dental hygienists. Thus, emotional leadership of dental hygienists can be strengthened to enhance empathy, understanding and management of others' feelings. Therefore, institutional support should be provided for developing an emotional leadership program based on education and training.

• International Journal of Highway Engineering
• /
• v.17 no.3
• /
• pp.49-58
• /
• 2015

PURPOSES : The use of environmentally friendly construction methods has been recently encouraged to reduce fuel consumption and the effects of global warming. For this purpose, the roller compacted concrete pavement (RCCP) construction method has been developed. RCCP is more environmentally friendly and economically efficient than general concrete by reducing the amount of CO2 generated through the application of a smaller amount of cement. RCCP has a number of advantages such as an easy construction method, low cost, high structural hydration performance, and aggregate interlocking. However, mix design standards and construction guidelines of RCCP are required for domestic application. In addition, a study on aggregate selection, which has an effect on the characteristics of RCCP, is necessary owing to a limited number of researches. Thus, the aggregate effect on the performance of RCCP in securing the required strength and workability was evaluated in consideration of domestic construction. METHODS : Sand and coarse aggregates of both 19mm and 13mm in maximum size were used in this study. Four types of aggregate gradations (s/a = 30%, 58%, and 70% for the sand and coarse aggregate of 19mm in maximum size, and s/a = 50% for a combination of the three types of aggregates) were set up to investigate the effects of the PCA band on the RCC characteristics. The conditions of s/a = 30% and 70% were evaluated to check the gradation effect outside of the recommended band. The conditions of s/a = 58% and 50% were used because they are the optimum combination of the two and three types of aggregates, respectively. RCCP gradation band was suggested gradation with a proper construction method of RCCP by synthetically comparing and analyzing the correlation of optimum water content, maximum dry density, and strength of requirements through its consistency and compaction test. RESULTS : The lower and upper limit lines are insufficient to secure a relatively strong development and workability compared to an aggregate gradation in the RCCP gradation band region. On the other hand, the line in the RCCP gradation band and the 0.45 power curve in the RCCP gradation band region were satisfactory, ensuring the required strength and workability. CONCLUSIONS : The suitable aggregate gradation on RCCP process should meet the RCCP gradation band area; however, fine particles passing through a #60 sieve do not need to be within the recommended gradation band because the influence of this region on such fine particles is small.

• Journal of Technology Innovation
• /
• v.22 no.2
• /
• pp.51-75
• /
• 2014

Sustainability has already become one of the most important innovation policy agendas in many countries. Korea has tried to emulate this global trend in various forms, unfortunately with little success. A very strong tradition of centralized administration in Korea has meant that local communities and municipalities have remained more or less passive in tackling their own sustainability issues and problems. In recent years, with the impetus of huge democratization attempts in Korea since the late 1980s, there have been some local attempts to remedy these imbalances since the early 2000s. A series of local experiments to try and test green alternatives against the very hostile environment have been implemented, with varying degrees of success. This study analyzed cases of transition experiment to sustainable socio-technical system such as MUSIC project, Low Carbon Green Village and Citizens' Sunlight Power Stations. To draw politic meanings for sustainable socio-technical system, these content, process of conversion and feature were examined.