• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 A
• /
• pp.267-269
• /
• 2004

Recently, due to increasing the application of power electronic equipment, harmonics generated from the non-liner load are fairy produced. Harmonics can cause a distribution problems such as the overheating of distribution transformer, the breakdown of device and communication interference. Interest about power quality decline of distribution system is very increased. In this paper, we are measured the harmonic voltage and current of distribution system to analyze harmonic characteristics, and it is analyzed Total Harmonic Distortion(HTD). Also, we are modeled distribution system using PSCAD/EMTDC. And it is analyzed harmonic voltage and current in steady-state. The study result have been indicated the utility about harmonics analysis and modeling for distribution system.

• 한국지반신소재학회논문집
• /
• 제14권2호
• /
• pp.89-94
• /
• 2015

본 연구에서는 제주도 내에서 발생되는 현무암 석분슬러지를 차수용 재료로 재활용하기 위하여 최적의 석분슬러지 혼합비를 가진 혼합토를 선정하고자 한다. 토질시험결과에 따르면 현무암 석분슬러지의 입경은 대부분 0.1mm 이하이고, 토질의 분류기준인 통일분류법(USCS)을 적용하면 ML 및 CL에 해당한다. 그리고 현장토의 입경은 0.1-10mm 사이에 존재하고, 통일분류법(USCS)을 적용하여 분류하면 SW에 해당한다. 최적의 석분슬러지 혼합비를 가진 혼합토를 선정하기 위하여 다양한 석분슬러지 혼합비를 가진 혼합토를 대상으로 최적 다짐조건 및 현장조건을 고려하여 투수시험을 수행하였다. 투수시험결과 석분슬러지 혼합비가 증가함에 따라 혼합토의 투수계수는 감소하는 경향을 보이며, 석분슬러지의 혼합비가 60%인 경우 가장 낮은 투수계수를 갖는다. 따라서 현무암 석분슬러지를 차수용 재료로 재활용하기 위한 석분슬러지 혼합토의 최적 혼합비는 60%임을 알 수 있다.

• 대한수학회지
• /
• 제36권2호
• /
• pp.403-419
• /
• 1999

We introduce a Hamiltonian system which consists of two balls in the vertical line colliding elastically with each other and the floor. Wojtkowski proved that for the system of two linear balls with a linear potential (with gravity), there is a periodic orbit which becomes linearly stable if m1

• 한국자동차공학회논문집
• /
• 제2권3호
• /
• pp.94-104
• /
• 1994

In order to improve engine performance and its reliability it is very important to find the friction force between piston-ring assembly and cylinder wall in engine operating conditions. A new system was developed for the piston-ring assembly friction force measurement. This system had a relatively high fundamental frequency at 884 Hz and a fine resolution of 0.5N in friction force measurement. Comparing with existing floating liner systems this systems required small installation space and at the same time alleviated the system noise problem induced by the thrust and slap impulse forces.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 A
• /
• pp.147-148
• /
• 2006

Recently, due to increasing the application of power electronic equipment, harmonics generated from the non-liner load are fairly produced. Harmonics can cause a variety of problems such as the overheating of distribution transformer, the breakdown of device and communication interference. Interest about power quality decline of power system is very increased. In this paper, we are measured the harmonic voltage and current o( power system to analyze harmonic characteristics, and it is analyzed Total Harmonic Distortion(THD). Also, we Ere modeled power system using PSCAD/EMTDC. And it is analyzed harmonic voltage and current in steady-state. The study results have been indicated the utility about harmonics analysis and modelling for power system.

• Tribology and Lubricants
• /
• 제28권6호
• /
• pp.315-320
• /
• 2012

For proper functioning, general machines usually need lubricant oil as a cooling, cleaning, and sealing agent at points of mechanical contact. The quality of lubricant oil can deteriorate during operation owing to various causes such as high temperature, combustion products and extraneous impurities. In this study, a heavy load stopped during operation, and the oil was analyzed to check whether any impurities were added. Extraction using acetonitrile followed by reaction with BSTFA(bistrimethylsilyl trifluoroacetamide) showed that, trimethylsilylated ethylene glycol was present in the lubricant oil. To quantify the ethylene glycol in the oil, deuterium-substituted ethylene glycol, which acted as an internal standard, was added to the sample and then extracted with the solvent. Next, the extract was reacted with the derivatizing agent(BSTFA) and then analyzed with GC/MS. The detection limit of this method was found to be $0.5{\mu}g/g$ and the recovery of oil containing $20,000{\mu}g/g$ of ethylene glycol was measured to be 94.8%. A damaged O-ring and eroded cylinder liner were found during the overhaul, which implied the leakage of coolant containing ethylene glycol into the lubricating system. The erosion of the cylinder liner was assumed to be due to cavitation of the coolant in the cooling system.

• 대한환경공학회지
• /
• 제28권3호
• /
• pp.265-269
• /
• 2006

본 연구는 산성상태의 침출수가 차수층에 미치는 영향을 규명하고 년간 산업부산물로 다량 배출되는 고로슬래그, 플라이애쉬를 재활용하기 위한 한 방안으로 매립지 차수층에 첨가시의 역할을 규명하기 위한 기초연구자료이다. 산성침출수가 고화차수층에 미치는 영향을 고찰하기 위해 압축강도와 투수계수 실험결과, 고화재(시멘트)와 준설점토로 성형된 고화차수층의 경우 산성상태의 침출수에 노출됨에 따라 압축강도 감소와 투수계수 증가현상을 나타내었다. 반면 고로슬래그와 플라이애쉬를 첨가한 고화토차수층의 경우는 산성상태의 침출수에 영향을 크게 받지 않는 것으로 나타났다. 이는 고알카리 상태를 나타내는 고로슬래그와 플라이애쉬의 경우 차수층 내부로 침투되어 수화반응에 의해 생성된 칼슘계 수화물을 용해하는 산성물질의 용해작용을 방해하기 때문으로 판단된다.

• 대한전기학회논문지
• /
• 제41권9호
• /
• pp.984-993
• /
• 1992

Fuzzy L.P. with Multi-criteria function is adopted in this VAR planning algorithm to accomplish the optimization of comflicting objectives, such as the amount of the VAR installed and power system loss, while keeping the bus voltage profile within an admissible range. Fuzzy L.P. with Multi-criteria function, a powerful tool dealing with the fuzziness of satisfaction levels of the constraints and the goal of objective functions, enables us to search for the solutions which may contribute in VAR planning. This advantage is not provided by traditional standardized L.P. The effectiveness of the proposed algorithm has been verified by the test on the IEEE-30 bus system.

• 대한전기학회논문지
• /
• 제37권7호
• /
• pp.484-489
• /
• 1988

Sufficient conditions concerning the perturbation region of system parameters, which guarantee the asymptotic stability of linear time- varying systems, are presented. These conditions are obtained by Lyapunov function approach for continuous-time and discrete-time systems. Also, a computational algorithm using nonlinear programming is proposed for finding the maximum perturbation region which satisfies the sufficient condition for the continuous-time systems. The technique of finding the solution for the continuous-time systems can also be applied to the discrete-time systems. In the continuous-time case, it is shown by an example that the method proposed in this paper yields much larger perturbation region of parameters than other previously reported results. An example of the perturbation region of system paramters for the discrete-time system is also given.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.559-562
• /
• 1995

In the crane control system, it is reguired that the travelling time of the crane must be reduced as much as possible and the swing must be stoped at the end point. In paper, we present a hybrid control method which include the optimal regulator and velocity pattern controller in order to make high performance of the anti-sway. To implement the control algorithm, the dynamic equation is linearlized at an equilibrium point, so that the liner time invariant state equation can be obtained. In order to experiment the crane control, we consider 1 over 10 of the gantry crane which is used in a port. As a result, the hybrid control method improve efficient anti-sway control more than conventional velocity pattern control. It is expected that the proposed system will make an important contribution to the industrial fields.