• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 B
• /
• pp.1343-1345
• /
• 2004

The inherent pulsating force generation makes the control of switched-reluctance motor quite complicate. So in this paper, an orthogonal scheme that can be applied to the control of LSRM will be presented. By using this scheme, the motor reluctance forces, which are magnetically decoupled and position dependent, can be projected onto sets of stationary axes that are aligned with the motor fixed secondary poles. Hence the electromagnetic forces can be controlled not only for driving the LSRM at its propulsive direction but also for alleviating the load at its normal direction. Simulation results will be provided to show the validity of the proposed scheme.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.725-726
• /
• 2008

This paper deals with characteristic analysis of Linear Switched Reluctance Motor (LSRM) according to switching condition. When approved current in each phase by decided position, we made sure current and voltage according to turn-on, turn-off. In dynamic simulation of LSRM, through an experiment, we decided turn-on position of inductance profile. Also, we presented dynamic characteristic analysis model which is consisted at motor and sensor signal part, etc., and substitute circuit constant that get using magnetic equivalent circuit method, we confirmed current and voltage waveform.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.77-79
• /
• 2008

This paper deals with extraction of design parameters of Linear Switched Reluctance Motor (LSRM) based on force calculation using space harmonic analysis, 2D Finite Element Method (FEM) and experimental measurement. First, analytical solutions for flux density due to mover winding currents are derived in terms of magnetic vector potential and a 2D rectangular coordinate system, for the case when the mover is located at aligned and unaligned position. The analytical results are compared with those obtained from a 2D FEM Second, using Fourier series expansion, this paper predicts the force profile of LSRM analytically.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1077-1078
• /
• 2011

This paper deals with eddy current analysis of linear switched reluctance motor using analytical method. First, flux density is calculated using analytical method. From flux density, eddy current is analyzed according to moving speed. Finally, analyzed result is compared with finite element method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.802_803
• /
• 2009

This paper deals with extraction of design parameters of Linear Switched Reluctance Motor (LSRM) and electromagnet based on force calculation using space harmonic analysis and 2D Finite Element Method (FEM) measurement. We introduce the design method employing FEM and parameter estimation method and a characteristics of LSRM according to variation of parameter.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.806_807
• /
• 2009

This paper deals with characteristic analysis on the Linear Switched Reluctance Motor with Interior Permanent Magnet (LSRM-IPM) according to the magnetization of permanent magnet. The governing equations and force equations are derived using analytical method for the suggested models. This paper compares the force characteristics in terms of three cases considering the position and size of permanent magnet.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.62-64
• /
• 2007

This paper deals with design of high speed linear switched reluctance motor(LSRM). First, we derived design factor from pole arc ratio of stator and mover, and calculated time constant using inductance and resistance. Second, we decided design parameter from design factor using time constant. Finally, analyze characteristics for LSRM using finite element analysis.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.59-61
• /
• 2008

This paper deals with design of Linear Switched Reluctance Motor (LSRM) considering to normal force. First, we derived design factor from pole arc ratio of stator and mover, and calculated time constant using inductance and resistance. Second, we decided design parameter from design factor using time constant, and analyze characteristics for LSRM using finite element analysis. Finally, we analyzed force characteristic according to design factor.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.138-140
• /
• 2005

This paper deals with inductance profile of linear switched reluctance motor. Inductance profile of LSRM calculate at align and unalign position using analytical method. Analytical method of this paper used space harmonics method, Also, analysis result compares with data that is derived through an experiment, and proved validity.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1034-1037
• /
• 2003

Recently in the field of precision positioning device, the contact-free actuators are gaining focuses with their outstanding performances by eliminating mechanical frictions. Th is paper is about the driving algorithm for contact-free linear actuator. The proposed driving algorithm has similar structure of drives of switched reluctance motor and reduces the normal forces and force ripple. The simulation and experiment are executed to verify the proposed method.