• Journal of the Semiconductor & Display Technology
• /
• v.9 no.2
• /
• pp.55-60
• /
• 2010

Ink transfer process from the printing roll to the moving web was investigated using a CFD technique for the application in R2R printed electronics. In line with the requirement that the web handling speed needs to be increased further for the cost competitiveness, the effects of web moving velocity with relatively complex roll patterns were analyzed. To make the present analysis more realistic, the numerical geometry and the ink properties were selected to match those of the real printing production system. Our numerical results showed that both web handling speed and complex printing-roll patterns influenced the shape of the transferred ink. As the web moving speed approaches towards 30mpm, a significant distortion of the shape of the transferred ink occurred. In the range of pattern width smaller than 100 microns, a phase distortion was also found to occur in all the printing-roll patterns considered in the present work but the ratio of the phase distortion to the line width gets smaller as the width becomes smaller. Thus, the web handling speed and the shape of printing-roll pattern will be important elements for the better printing quality under 100 micron line width range.

• Journal of the Korean Society of Costume
• /
• v.30
• /
• pp.201-210
• /
• 1996

The perpose of this study is to compare and to analyze the characters of the shape of up-per arm and armscye line between young and aged women. The subjects were measured with the Mar-tin's anthropometer and with free curve ruler. 10 items in the shape of upper arm were measured and 16 items in the shape of armscye line measured indirectly based on the measured shape taken from the subjects with free curve ruler and both date were analyzed. Mean standard deviation f-test factor analysis were performed for the statistical analysis of the date. The main results were as follows: 1) The shape of the upper arm is long and narrow in youg women compared with aged. 2) The length of the axilla of the aged women were longer than that of young women. 3) There are significant differences young and aged women on the shape of armscye line. THe length of from the front point of axilla to shoulder point width and depth of the shape of the armscye line length of axilla of aged women were longer than that of young. but the length of from the back point of axilla to shoulder point of yyoung women was longer than aged. 4.) The front point of axilla was existed lower than back point of axilla in aged women while front point of axilla was existed higher than the back point in young. 5) Through the factor analysis two factors were obtained from the shape of the upper arm and five factors from the shape on armmscye line in both groups. Factor compornents in the shape of the up per arm were length width and girth of that and in the shape of the armscye line were width and length of upper and lower back and front part of the shape of the armscye line depth of the axilla. he items in the same factor were resemble each other between two groups.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.3
• /
• pp.385-392
• /
• 2006

This paper proposes a new stroke extraction algorithm for phoneme segmentation, which is one of main techniques for off-line handwritten Hangul recognition. The proposed algorithm extracts vertical, slant, and horizontal strokes from phonemes using run-length. The run-length of vertical or slant strokes becomes the width, and also the number of horizontal run-lengths the width. After extracting horizontal strokes from phonemes, the algorithm links two continuous vertical or slant stokes with run-lengths of the strokes' width to represent the features of a character. The extracted strokes can be utilized to recognize a character, using template matching of strokes, which is being adopted in on-line handwritten Hangul recognition.

• Journal of Fashion Business
• /
• v.10 no.4
• /
• pp.55-69
• /
• 2006

The purpose of this study is to evaluate the differences of visual effects by variations in the location and width of the waist band of one-piece dress. The stimuli are 24 samples: 8 variations of the location of the waist band and 3 variations of the width of the waist band. The data has been obtained from 50 fashion design majors. The data has analyzed by Factor Analysis, Anova, Scheffe's Test and the MCA method. The results of the study are as follows: According to the result of factor analysis of the visual effects based on the changes in the location and width of waist bands for one-piece dress, four factors were identified - verticality of whole-body, horizontality of upper-body, curves of lower-body and shape of breast. Whole-body verticality and upper-body horizontality were found to be the most important factor among them. In all of the four factors of the visual effects, significant differences were observed according to the location of the waist bands for one-piece dress. The visual effects were evaluated positively when the waist bands were positioned above the natural waist line and negatively when the waist bands were positioned below the natural waist line. In addition, significant differences were observed in the visual effects according to the width of waist bands when the waist bands were positioned above the natural waist line, and visual effects were better when the band width was 3.5cm and 4.5cm than the others. The interaction of the visual effect showed significant differences in horizontality of upper-body, curves of lower-body and shape of breast.

• Restorative Dentistry and Endodontics
• /
• v.18 no.2
• /
• pp.291-316
• /
• 1993

Restorative procedures can lead to tooth fracture due to the relatively small amount of the remaining tooth structure. It is essential to prevent fractures by having a clear concept of the designs for cavity preparations. Among the several parameters in cavity designs, profound understanding of isthmus width factor would facilitate selection of the appropriate cavity preparation for a specific clinical situation. In this study, MO amalgam cavity were prepared on maxillary first premolar and filled with amalgam. Three dimensional, model with 1365 8-node brick elements was made by serial photographic method. In this model, isthmus was varied in width at 1/4, 1/3, 1/2 and 2/3 of intercuspal width and material properties were given for three element groups, i.e., enamel, dentin and amalgam. A load of 500 N was applied vertically on amalgam and enamel. In case of enamel loading, 2 model (with and without amalgam) was compared to consider the possibility of play at the interface between tooth material and amalgam. These models were analyzed with three dimensional finite element method. The results were as follows: 1. The stress was concentrated on the facio-pulpal line angle and distal marginal ridge of the cavity. 2. With the increase of the isthmus width, the stress spread around the facio-pulpal line angle and the area of stress concentration moved toward the proximal box. 3. In case of narrow isthmus width, the initiation point of crack would be in the area of isthmus corner of the cavity, and with the increase of the isthmus width, it would move toward the proximal box and at the same time the possibility of crack increase at the distal marginal ridge. 4. The direction of crack progressed outward and downward from the facio-pulpal line angle, and with the increase of the isthmus width, it approximated vertical direction. At the marginal ridge, it occurred in vertical direction. 5. It would be favorable to make the isthmus width narrower than a third of the intercuspal width, and to cover the cusp if isthmus width were wider than half of the intercuspal width. 6. It is necessary to apply the possibility of play to the finite element analysis.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1993.05a
• /
• pp.96-99
• /
• 1993

Electrical properties of the Thin Film Transistor(TFT) electrode metal films were investigated through the Test Elements Group(TEG) experiment. The main purpose of this investigation was to characterize the electrical resistance properties of patterned metal films with respect to the variations of film thickness and TEG metal line width. Aluminum(Al), Tantalum(Ta) and Chromium(Cr) that are currently used as TFT electrode films were selected as the probed metal films. To date, no work in the electrical characterizations of patterned electrodes of a-Si TFT was accomplished. Bulk resistance$(R_b)$, sheet resistance$(R_s)$, and resistivities($\rho$) of TEG patterned metal lines were obtained. Electrical continuity test of metal film lines was also performed in order to investigate the stability of metallization process. Almost uniform-linear variations of the electrical properties with respect to the metal line displacements was also observed.

• Proceedings of the IEEK Conference
• /
• 2003.07c
• /
• pp.2851-2854
• /
• 2003

The purpose of this paper was to find out the stabilized and effective value of RC-parameter by using PSpice simulation, considering that gate signal voltage can be distorted by RC-delay of signal line. the results of this study were as follows: TFT-LCD with high quality resolution increased the number of gate signal line and this made TFT on-time shorter over-width of signal line to improve the performance of TFT made the electrostatic capacity increase and the time constant higher, making problems and errors. and owing to the decrease of the aperture ratio, an electro optic character of LCD, we must consider the capacity and the condition of production process in deciding the width and the thickness of the gate signal line.

• Journal of computational fluids engineering
• /
• v.13 no.1
• /
• pp.1-6
• /
• 2008

Direct Write Technologies are being utilized in various industrial fields such as antennas, engineered structures, sensors and tissue engineering. With Direct Write Technologies, producing features have the mesoscale range, from 1 to 100 microns. One form of the Direct Write Technologies is based on aerosol dynamics. The shape of deposited aerosols determine the form of products in the Direct Write Technology based on aerosol dynamics. To predict shape of deposited aerosol, a prediction model is created. In this study, we estimated Line-Width and Line-Thickness from the prediction model. Results of prediction model is valid from comparison with experimental results.

• Laser Solutions
• /
• v.3 no.2
• /
• pp.25-33
• /
• 2000

One of perspective direction of microfabrication is direct laser writing technology that allows to create metal, semiconductive and dielectric micropatterns on substrate surface. In this work, a two step method, the combination of seed forming process, in which metallic Al seed was selectively generated on AlN ceramic substrate by direct writing technique using a pulsed Nd : YAG laser and subsequent electroless Ni plating on the activated Al seed, was presented. The effects of laser parameters such as pulse energy, scanning speed and pulse frequency on shape of Alseed and conductor line after electroless Ni plating were investigated. The nature of the laser activated surface is analyzed from XPS data. The line width of this metallic Al and Ni is analyzed using SEM. As a results, Al seed line with 24㎛ width and 100㎛ isolated line space is obtained. Finally, laser direct writing can be applied in the field between thin and thick film technique in electronic industry.

• Journal of IKEEE
• /
• v.22 no.3
• /
• pp.882-885
• /
• 2018

Recently, signal integrity on PCB (printed circuit board) becomes very important as the system operation speed increases. So far, PCB is customarily designed to minimize area and cost. However, ultra-high-speed PCB often fail to operate properly, unless it is precisely and carefully designed considering dielectric characteristics, line width, line spacing, and impedance matching. This paper surveys many problems in ultra-high-speed PCB and various design methods to mitigate them.