• 대한치과교정학회지
• /
• 제15권1호
• /
• pp.43-54
• /
• 1985

Recently, rapid palatal expansion technique is widely used for the correction of the skeletal imbalance in Cl III malocclusion patients. There were many studies about the cephalometric changes to rapid palatal expansion but quantitative analysis were small. The purpose of this study was to analysis the stresses and displacement of the maxilla in human dry skull to rapid palatal expansion. The results were as follows: 1. The anterior portion of palate show more lateral and inferior displacement than the posterior portion. But the posterior portion show more anterior displacement. 2. In transpalatal suture area, the medial portion show more anterior and inferior displacement than the lateral portion. But the lateral portion show more lateral displacement than the medial portion. 3. In mid-sagittal plane, the lower portion (palatal area) of maxilla show more anterior, lateral, inferior displacement than the upper portion (frontamaxillary stuture area). 4. In zygomatic arch, the adjacent area to maxilla show tonsil. stresses and the adjacent area to frontal bone show compressive stresses. 5. The sequence of stress bearing area to R.P.E. is upper retromolar area, upper 1st molar, 1st premolar, 2nd premolar, anterior segment of teeth.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.756-759
• /
• 2004

We present a piezoelectric actuator using stiffness control and stroke amplification mechanism in order to make large lateral displacement. In this work, we suggest stiffness control approach that generates lateral displacement by increasing the vertical stiffness and reducing the lateral stiffness using additional structure. In addition, an additional structure of a serpentine spring amplifies the lateral displacement like leverage structure. The suggested lateral PZT actuator (bellows actuator) consists of serpentine spring and PZT/electrode layer which is located at the edge of the serpentine spring. The edge of the serpentine spring prevents the vertical motion of PZT layer, while the other edge of the serpentine spring makes stroke amplification like leverage structure. We have determined dimensions of the bellows actuator using ANSYS simulation. Length, width and thickness of PZT layer are 135$\mu$m, 20$\mu$m and 0.4$\mu$m, respectively. Dimensions of the silicon serpentine spring are thickness of 25$\mu$m, length of 300$\mu$m, and width of 5$\mu$m. The bellows actuator has been fabricated by SOI wafer with 25$\mu$m-top silicon and 1$\mu$m-buried oxide layer. The bellows actuator shows the maximum 3.93$\pm$0.2$\mu$m lateral displacement at 16V with 1Hz sinusoidal voltage input. In the frequency response test, the fabricated bellows actuator showed consistent displacement from 1Hz to 1kHz at 10V. From experimental study, we found the bellows actuator using thin film PZT and silicon serpentine spring generated mainly laterally displacement not vertical displacement at 16V, and serpentine spring played role of stroke amplification.

• Wind and Structures
• /
• 제36권6호
• /
• pp.379-392
• /
• 2023

Structural health monitoring is used to ensure the well-being of civil structures by detecting damage and estimating deterioration. Wind flow applies external loads to high-rise buildings, with the horizontal force component of the wind causing structural displacements in high-rise buildings. This study proposes a deep learning-based predictive model for measuring lateral displacement response in high-rise buildings. The proposed long short-term memory model functions as a sequence generator to generate displacements on building floors depending on the displacement statistics collected on the top floor. The model was trained with wind-induced displacement data for the top floor of a high-rise building as input. The outcomes demonstrate that the model can forecast wind-induced displacement on the remaining floors of a building. Further, displacement was predicted for each floor of the high-rise buildings at wind flow angles of 0° and 45°. The proposed model accurately predicted a high-rise building model's story drift and lateral displacement. The outcomes of this proposed work are anticipated to serve as a guide for assessing the overall lateral displacement of high-rise buildings.

• 한국지반공학회지:지반
• /
• 제13권4호
• /
• pp.55-66
• /
• 1997

본 연구에서는 그물식 뿌리말뚝의 타설경사각과 횡방향저항력 사이의 관계를 비교분석하고자 여러가지의 타설경사각을 갖는 모형 그물식 뿌리말뚝을 제작하여 모형지반에 설치한 다음 횡방 향재하시험을 하였다. 모형 뿌리말뚝의 배치는 12개의 말뚝을 6개씩 2개의 크고 작은 동심원에 접하도록 하였는데 각각의 시험에 사용한 모형말뚝은 $0^{\circ}\;, 5^{\circ}\;, 10^{\circ}\;, 15^{\circ}\;, 20^{\circ}\;, 25^{\circ}$의 타설경사각을 갖 는 직경 5m의 강봉에 모래를 입힌 것이다. 횡방향하중을 받는 뿌리말뚝에 있어서 실험을 통해 얻은 하중변위곡선으로 판단해 볼 때 1mm정도의 횡방향변위에서는 타설경사각이 커질수록 횡방향저항력도 커지지만 최적 타설경사 각은 횡방향변위가 증가할수록 감소하며 6mm의 횡방향변위에서는 $17.5^{\circ}$. 타설경 사각 $0^{\circ}$횡방향저항력에 대한 최적 타설경사각에서의 횡방향저항력의 비는 횡방향변위가 증가할수록 감소하므로 횡방향변위가 커질수록 말뚝을 경사지게 배치함으로써 얻는 저항력 증대효과는 줄어들 것으로 예상된다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.940-950
• /
• 2010

In case of uneven surcharge like backfill or embankment after constructing caisson applied on the deep soft marine deposits, lateral deformation of soft soils would happen due to plastic deformation of soil particles by increase of excess pore water pressure. Lateral deformation of soil will result in the caisson displacement which affects soft soil-caisson structure safety. Soft soil was improved by soil compaction pile method, and then gravity caisson was installed. Soil deformations were monitored and analyzed with step by step backfill and embankment behind the caisson. Amount and speed of lateral deformation after the installation of caissons were closely related with the time of backfill and embankment. The relationship between maximum lateral displacement($\Delta_y$) in front of caisson and settlement($\Delta_s$) can be expressed as $\Delta_y=(0.0871)\Delta_s+122.95$. Soft soil depth did not affect the lateral displacement of caisson in this study, which can be explained the soft soil improvement under the caisson by S.C.P. method. Substantially the amount and speed of the lateral deformation of caisson were closely related with the uneven surcharging rate behind caisson.

• 한국지반신소재학회논문집
• /
• 제11권1호
• /
• pp.11-21
• /
• 2012

본 연구에서는 지중연속벽 설계시 사용되는 범용 해석프로그램에 Rankin(1857)의 이론토압과 홍원표와 윤중만(1995a)의 경험토압을 각각 적용하여 Top-Down 공법에 적용된 지중연속벽의 수평변위를 분석하였다. 그리고 이들 해석 프로그램에서 산정된 예측변위량과 지중경사계로 측정된 실측변위량을 비교 검토하였다. 현재 지중연속벽 설계에 적용되는 해석프로그램에는 Rankine의 토압이 주로 적용되고 있다. 검토결과, 지중연속벽의 예측수평변위는 적용되는 토압에 따라 상당히 큰 차이를 나타내고 있다. Rankine의 토압을 적용하여 산정된 예측수평변위 형상은 실측결과와 큰 차이를 보이고 있으며 벽체의 하부에서 예측치가 실측치보다 과다하게 산정되었다. 반면, 홍원표 윤중만의 토압을 적용하여 얻은 예측수평변위 형상과 최대수평변위량은 실측결과와 유사하게 나타났다. 따라서 Top-Down 공법이 적용된 지중연속벽의 설계시 Rankine의 토압보다는 홍원표 윤중만의 경험토압을 적용하는 것이 적합함을 알 수 있다.

• Geomechanics and Engineering
• /
• 제14권5호
• /
• pp.459-466
• /
• 2018

By conducting uniaxial loading cycle tests on the coal rock with outburst proneness, the dilatation characteristics at different loading rates were investigated. Under uniaxial loading and unloading, the lateral deformation of coal rock increased obviously before failure, leading to coal dilatation. Moreover, the post-unloading recovery of the lateral deformation was rather small, suggesting the onset of an accelerated failure. As the loading rate increased further, the ratio of the stress at the dilatation critical point to peak-intensity increased gradually, and the pre-peak volumetric deformation decreased with more severe post-peak damage. Based on the laboratory test results, the lateral deformation of the coals at different depths in the #1302 isolated coal pillars, Yangcheng Coal Mine, was monitored using wall rock displacement meter. The field monitoring result indicates that the coal lateral displacement went through various distinct stages: the lateral displacement of the coals at the depth of 2-6 m went through an "initial increase-stabilize-step up-plateau" series. When the coal wall of the working face was 24-18 m away from the measuring point, the coals in this region entered the accelerated failure stage; as the working face continued advancing, the lateral displacement of the coals at the depth over 6 m increased steadily, i.e., the coals in this region were in the stable failure stage.

• 한국지반신소재학회논문집
• /
• 제10권4호
• /
• pp.1-10
• /
• 2011

측방유동의 발생이 가능한 해안연약지반에 성토를 시행하면 지표면의 하부에는 수평변위가 발생한다. 이러한 수평변위는 인접지반에 변형을 발생하여 인접 지하에 매설된 각종 기반시설에 영향을 미칠수 있다. 수평변위의 억지대책으로 성토지지말뚝과 억지말뚝을 적용하였고, 억지대책의 효과분석을 위해 무보강지반과 보강지반으로 구분하여 수치해석을 시행하였다. 수치해석 결과는 억지말뚝 보강시가 무보강시보다 1.9배의 효과가 있었다. 성토지지말뚝의 보강은 무보강시보다 2.6배의 효과가 있는 것으로 나타났다. 또한, 두 억지대책중 억지말뚝 보강보다 성토지지말뚝 보강이 1.3~1.6배의 효과가 있는 것으로 나타났다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 기초기술학술발표회
• /
• pp.43-56
• /
• 2002

To find a lateral long term behavior of driven H-piles in embankment, inclinometer is installed at pile and measurement is done during a year. When behavior of measured slope angles is in accord with behavior of nonlinear p-y curves(Reese, Murchison and O'Neil, Matlock's p-y analysis), maximum displacement of pile head, maximum stress and maximum bending moment of pile obtained from the numerical analysis are shown. As results, maximum lateral displacement at pile head, maximum stress and maximum bending moment of pile are shown linear behavior, And maximum lateral load, maximum lateral displacement, and maximum bending moment at pile obtained from the numerical analysis are 8∼12.4tonf, 9∼10.1㎜, and 10.39∼12.67tonf-m per pile according to the curves, respectively.

• 한국산학기술학회논문지
• /
• 제7권2호
• /
• pp.219-223
• /
• 2006

본 연구에서는 배면성토에 의하여 발생하는 연약지반의 측방유동 판정기준을 평가하고 분석하였다. 이를 위하여 군장신항만 잔교구조물 현장의 측방유동을 계측하였으며, 계측결과와 판정기준을 비교, 분석하였다. 연구결과, 비배수강도로 표현되는 측방유동 한계하중, 일본 도로공단 측방이동지수, 일본 건설성 토목연구소 측방이동판정수. 한국 도로공사 수정 I 지수 등이 각 기준값보다 작은 값에서 측방유동이 발생하였다.