Geomechanics and Engineering

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Dilatation characteristics of the coals with outburst proneness under cyclic loading conditions and the relevant applications

  • Li, Yangyang (State Key Laboratory of Mining Disaster Prevention and Control, Shandong University of Science and Technology) ;
  • Zhang, Shichuan (State Key Laboratory of Mining Disaster Prevention and Control, Shandong University of Science and Technology) ;
  • Zhang, Baoliang (College of Architecture Engineering, Liaocheng University)
  • Received : 2017.01.07
  • Accepted : 2017.09.18
  • Published : 2018.04.10
⟨ Previous Next ⟩

Abstract

By conducting uniaxial loading cycle tests on the coal rock with outburst proneness, the dilatation characteristics at different loading rates were investigated. Under uniaxial loading and unloading, the lateral deformation of coal rock increased obviously before failure, leading to coal dilatation. Moreover, the post-unloading recovery of the lateral deformation was rather small, suggesting the onset of an accelerated failure. As the loading rate increased further, the ratio of the stress at the dilatation critical point to peak-intensity increased gradually, and the pre-peak volumetric deformation decreased with more severe post-peak damage. Based on the laboratory test results, the lateral deformation of the coals at different depths in the #1302 isolated coal pillars, Yangcheng Coal Mine, was monitored using wall rock displacement meter. The field monitoring result indicates that the coal lateral displacement went through various distinct stages: the lateral displacement of the coals at the depth of 2-6 m went through an "initial increase-stabilize-step up-plateau" series. When the coal wall of the working face was 24-18 m away from the measuring point, the coals in this region entered the accelerated failure stage; as the working face continued advancing, the lateral displacement of the coals at the depth over 6 m increased steadily, i.e., the coals in this region were in the stable failure stage.

Keywords

Acknowledgement

Supported by : National Natural Science Foundation of Shandong Province, Scientific Research Foundation of Shandong University of Science and Technology Talents

References

  1. Chai, Z., Kang, T. and Chen, W. (2014), "Effects of organic silicone additive material on physical and mechanical properties of mudstone", Geomech. Eng., 6(2), 139-151. https://doi.org/10.12989/gae.2014.6.2.139
  2. Chen, S.J., Zhou, H., Guo, W.J., Wang, H.L. and Sun, X.Z. (2012), "Study on long-term stress and deformation characteristics of strip pillar", J. Min. Safe. Eng., 29(3), 376-380.
  3. Heap, M.J. and Faulkner, D.R. (2008), "Quantifying the evolution of static elastic properties as crystalline rock approaches failure", J. Rock Mech. Min. Sci., 45(4), 564-573. https://doi.org/10.1016/j.ijrmms.2007.07.018
  4. Huang, D., Huang, R.Q. and Zhang, Y.X. (2012), "Experimrntal investigations on static loading rate effects on mechanical properties and energy mechanism of coarse crystal grain marble under uniaxial compression", Chin. J. Rock Mech. Eng., 31(2), 245-255.
  5. Jorat, M.E., Kreiter, S., Moerz, T., Moon, V. and de Lange, W. (2013), "Strength and compressibility characteristics of peat stabilized with sand columns", Geomech. Eng., 5(6), 575-594. https://doi.org/10.12989/gae.2013.5.6.575
  6. Kong, X., Liu, J., Zou, D. and Liu, H. (2016), "Stress-dilatancy relationship of Zipingpu gravel under cyclic loading in triaxial stress states", J. Geomech., 16(4), 04016001. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000584
  7. Lyamina, E.A. and Nguyen, T. (2016), "Effect of the yield criterion on the strain rate and plastic work rate intensity factors in axisymmetric flow", Struct. Eng. Mech., 58(4), 719-729. https://doi.org/10.12989/SEM.2016.58.4.719
  8. Mouthereau, F., Fillon, C. and Ma, K.F. (2009), "Distribution of strain rates in the Taiwan orogenic wedge", Earth Planet. Sci. Lett., 284(3-4), 361-385. https://doi.org/10.1016/j.epsl.2009.05.005
  9. Qi, C., Wang, M. and Qian, Q. (2009), "Strain-rate effects on the strength and fragmentation size of rocks", J. Imp. Eng., 36(12), 1355-1364. https://doi.org/10.1016/j.ijimpeng.2009.04.008
  10. Qiu, S.L., Feng, X.T., Xiao, J.Q. and Zhang, C.Q. (2014), "An experimental study on the pre-peak unloading damage evolution of marble", Rock Mech. Rock Eng., 47(2), 401-419. https://doi.org/10.1007/s00603-013-0394-7
  11. Wang, C.Q., Gao, L.Q. and Chen, S.J. (2013), "Field research on long-term bearing capacity of strip pillar", J. Min. Safe. Eng., 30(6), 799-804.
  12. Wang, H.L., Fan, P.X., Wang, M.Y., Li, W.P. and Qian, Y.H. (2011), "Influence of strain rate on progressive failure process and characteristic stresses of red sandstone", Rock Soil Mech., 32(5), 1340-1346.
  13. Xiao, J.Q., Ding, D.X., Xu, G. and Jiang, F.L. (2010), "Deformation characteristics of rock under constant amplitude cyclic loading", J. Central South Univ. Sci. Technol., 41(2), 685-691.
  14. Xie, Z., Peng, F. and Zhao, T. (2014), "Experimental study on Fatigue crack propagation of fiber metal laminates", Steel Compos. Struct., 17(2), 145-157. https://doi.org/10.12989/scs.2014.17.2.145
  15. Yu, S., Zhu, W.S., Yang, W.M., Zhang, D.F. and Ma, Q.S. (2015), "Rock bridge fracture model and stability analysis of surrounding rock in underground cavern group", Struct. Eng. Mech., 53(3), 481-495. https://doi.org/10.12989/sem.2015.53.3.481
  16. Zhang, J., Yang, J., Han, J. and Zhang, W. (2016), "Evaluation of dilatancy behavior of asphalt mixtures using partial triaxial compression tests", J. Mater. Civ. Eng., 28(1), 1-10.
  17. Zhao, W., Huangb, R. and Yanc, M. (2015), "Mechanical and fracture behavior of rock mass with parallel concentrated joints with different dip angle and number based on PFC simulation", Geomech. Eng., 8(6), 757-767. https://doi.org/10.12989/gae.2015.8.6.757
  18. Zhao, X., Cai, M. and Cai, M. (2010), "Considerations of rock dilation on modeling failure and deformation of hard rocks-a case study of the mine-by test tunnel in Canada", J. Rock Mech. Geotech. Eng., 2(4), 338-349.
  19. Zhou, J.W., Yang, X.G., Fu, W.X., Xu, J., Li, H.T., Zhou, H.W. and Liu, J. (2010), "Experimental test and fracture damage mechanical characterstic of brittle rock under uniaxial cyclic loading and un loading conditions", Chin. J. Rock Mech. Eng., 29(6), 1172-1183.
  20. Zhou, X.P., Yang, H.Q. and Zhang, Y.X. (2009), "Rate dependent critical strain energy density factor of Huanglong limestone", Theor. Appl. Fract. Mech., 51(1), 57-61. https://doi.org/10.1016/j.tafmec.2009.01.001

Cited by

  1. Deformation Failure Characteristics and Loading Rate Effect of Sandstone Under Uniaxial Cyclic Loading and Unloading pp.1573-1529, 2019, https://doi.org/10.1007/s10706-018-0674-9
  2. Study on the “Pressure Relief and Yielding Support” Joint Prevention and Control Technology for the Weak Impact Roadway in the Extremely Thick Coal Seam vol.2021, pp.None, 2018, https://doi.org/10.1155/2021/6635350
  3. An Experimental Study Into the Effects of Cumulative Energy Damage on the Mechanical Properties of Coal vol.8, pp.None, 2018, https://doi.org/10.3389/fmats.2021.733391
  4. Deformation and permeability evolution of coal during axial stress cyclic loading and unloading: An experimental study vol.24, pp.6, 2018, https://doi.org/10.12989/gae.2021.24.6.519