• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.4
• /
• pp.443-451
• /
• 2010

This paper describes a fully integrated CMOS low-IF mobile-TV RF tuner for Band-III T-DMB/DAB applications. All functional blocks such as low noise amplifier, mixers, variable gain amplifiers, channel filter, phase locked loop, voltage controlled oscillator and PLL loop filter are integrated. The gain of LNA can be controlled from -10 dB to +15 dB with 4-step resolutions. This provides a high signal-to-noise ratio and high linearity performance at a certain power level of RF input because LNA has a small gain variance. For further improving the linearity and noise performance we have proposed the RF VGA exploiting Schmoock's technique and the mixer with current bleeding, which injects directly the charges to the transconductance stage. The chip is fabricated in a 0.18 um mixed signal CMOS process. The measured gain range of the receiver is -25~+88 dB, the overall noise figure(NF) is 4.02~5.13 dB over the whole T-DMB band of 174~240 MHz, and the measured IIP3 is +2.3 dBm at low gain mode. The tuner rejects the image signal over maximum 63.4 dB. The power consumption is 54 mW at 1.8 V supply voltage. The chip area is $3.0{\times}2.5mm^2$.

• Proceedings of the KIEE Conference
• /
• 2004.07c
• /
• pp.1860-1862
• /
• 2004

It is widely known that the ultra high frequency (UHF) method that detects the electromagnetic wave of the PD pulses in the gas insulated space is one of the most competitive methods for its high sensitivity. From the above point of view, this paper describes the characteristics of GIS PD signals measured with ultra wide band (UWB) GIS PD detecting system in which PD signals are detected into the dual UHF band. The UWB PD detection system consists of the UWB UHF coupler, the UWB low noise amplifier (LNA) and the oscilloscope. The dual bands for PD signals are 0.5-2GHz(full band) and 1-2GHz(high band). As results, it was found that the partial discharges of each defect have their own characteristic pattern and the ratio of High band to Full band increases with gas pressure.

• Proceedings of the IEEK Conference
• /
• 2000.11b
• /
• pp.17-20
• /
• 2000

We have enhanced the yield of 0.25 ${\mu}{\textrm}{m}$ T-gate $Al_{0.25}$G $a_{0.75}$As/I $n_{0.2}$G $a_{0.8}$As P-HEMT using three-layer E-beam lithography process and selective etching process. The three-layer resist structure (PMMA/copolymer/ PMMA=2000 $\AA$/3000 $\AA$/2000 $\AA$) and three developers (Benzene：IPA=1：1,Methanol：IPA =1：1,MIBK：IPA=1：3) were used for fabrication of a wide-head T-gate by the conventional double E-beam exposure technology. Also 1 wt% citric acid： $H_2O$$_2$：N $H_{4}$OH(200m1：4ml：2.2ml) solution were used for uniform gate recess. The etching selectivity of GaAs over $Al_{0.25}$G $a_{0.75}$As is measured to be 80. So these P-HEMT processes can be used in X-band MMIC LNA fabrication.ion.ion.ion.

• Proceedings of the KIEE Conference
• /
• 2004.11d
• /
• pp.63-66
• /
• 2004

It is widely known that the ultra high frequency (UHF) method that detects the electromagnetic wave of the PD pulses in the gas insulated space is one of the most competitive methods for its high sensitivity. From the above point of view, this paper describes the characteristics of GIS PD signals measured with ultra wide band (UWB) GIS PD defecting system in which PD signals are defected into the dual UHF band. Thc UWB PD detection system consists of the UWB UHF coupler, the UWB low noise amplifier (LNA) and the oscilloscope. The dual bands for PD signals are 0.5-2GHz(full band) and 1-2GHz(high band). As results, it was found that the partial discharges of each defect have their own characteristic pattern and the ratio of High hand to Full band increases with gas pressure.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.818-823
• /
• 2003

본 논문에서는 입력 매칭(input matching) BIST(Built-In Self-Test) 회로를 이용한 RF font end의 새로운 결함 검사방법을 제안한다. BIST 회로를 가진 RF front end는 1.8GHz LNA(Low Noise Amplifier: 저 잡음 증폭기)와 이중 대칭 구조의 Gilbert 셀 믹서로 구성되어 있으며, TSMC 0.25$\mu\textrm{m}$ CMOS 기술을 이용하여 설계되었다. catastrophic 결함 및 parametric 변동을 가진 RF front end와 결함을 갖지 않은 RF front end를 판별하기 위해 RF front end의 입력 전압 특성을 조사하였다. 본 방법에서는 DUT(Device Under Test: 검사대상이 되는 소자)와 BIST 회로가 동일한 칩 상에 설계되어 있기 때문에 측정할 때 단지 디지털 전자계와 고주파 전압 발생기만이 필요하며, 측정이 간단하고 비용이 저렴하다는 장점이 있다. BIST 회로가 차지하는 면적은 RF front end가 차지하는 전체면적의 약 10%에 불과하다. 본 논문에서 제안하는 검사기술을 이용하여 시뮬레이션해 본 결과 catastrophic 결함에 대해서는 100%, parametric 변동에 대해서는 약 79%의 결함을 검출할 수 있었다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.829-831
• /
• 2012

본 논문은 차량 추돌 예방 레이더용 고 이득 저전력 저잡음 특성을 가진 24GHz 저잡음 증폭기(LNA)를 제안한다. 이러한 회로는 TSMC $0.13{\mu}m$ 혼성신호/고주파 CMOS 공정($f_T/f_{MAX}=120/140GHz$)으로 설계되어 있다. 증폭기의 전압 이득을 향상시키기 위해 2단 캐스코드 구조로 구성되어 있다. 제안한 저잡음 증폭기는 최근 발표된 연구결과에 비해 41dB의 가장 높은 전압이득과 3.7dB의 가장 낮은 잡음지수 및 2.8dBm의 가장 우수한 IIP3 특성을 각각 보였다.

• Journal of electromagnetic engineering and science
• /
• v.8 no.1
• /
• pp.34-39
• /
• 2008

An RF front-end dual-conversion receiver for $3{\sim}5\;GHz$ MB-OFDM UWB systems is implemented in $0.18\;{\mu}m$ CMOS technology. The receiver includes a two-stage UWB LNA, an RF mixer, an IF I/Q mixer, and a frequency synthesizer. The proposed receiver adopts the dual-conversion architecture to mitigate the burden of design of the frequency synthesizer. Accordingly, the proposed frequency synthesizer generates four LO tones from only one VCO. The receiver front-end achieves power gain of 16.3 to 21 dB, NF of 7 to 7.6 dB over $3{\sim}5\;GHz$, and IIP3 of -21 dBm, while consuming 190 mW from a 1.8 V supply.

• Proceedings of the KIEE Conference
• /
• 2004.05b
• /
• pp.136-139
• /
• 2004

It is widely known that the ultra high frequency (UHF) method that detects the electromagnetic wave of the PD pulses in the gas insulated space is one of the most competitive methods for its high sensitivity. From the above point of view, this paper describes the propagation characteristics of GIS PD signals measured with ultra wide band (UWB) GIS PD detecting system in which PD signals are detected into the dual UHF band. The UWB PD detection system consists of the UWB UHF coupler, the UWB low noise amplifier (LNA) and the oscilloscope. The dual bands for PD signals are 0.5-2GHz(full band) and 1-2GHz(high band). As results, propagation characteristics of GIS PD signals were measured in the mock-up GIS bus and it was found that the propagation characteristics of the high band showed a better result in accordance with the infernal configuration of the GIS bus than those of the full band.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.6
• /
• pp.900-909
• /
• 1999

The receiving part of the RF system for the digital TRS base stations is developed in this paper. Based on the system specifications, the structure of the RF system is accomplished and its block diagram is drawn. The RF system is implemented according to these block diagrams. Subsequently the RF band-pass filter, the low noise amplifier, the automatic level controlled attenuator, the frequency synthesizer and other components for the system are designed and implemented, and a main board to integrate these modules is also manufactured. To lower the noise floor of the system and suppress the RF spurious noise, a PCB layout is performed carefully. For each module consisting of the RF system and the entire system, the performance tests are accomplished to check the specifications.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.6
• /
• pp.670-680
• /
• 2010

A low power single-chip CMOS receiver for 60 GHz mobile application are proposed in this paper. The single-chip receiver consists of a 4-stage current re-use LNA with under 4 dB NF, Cgs compensating resistive mixer with -9.4 dB conversion gain, Ka-band low phase noise VCO with -113 dBc/Hz phase noise at 1 MHz offset from 26.89 GHz, high-suppression frequency doubler with -0.45 dB conversion gain, and 2-stage current re-use drive amplifier. The size of the fabricated receiver using a standard 0.13 ${\mu}m$ CMOS technology is 2.67 mm$\times$0.75 mm including probing pads. An RF bandwidth is 6.2 GHz, from 55 to 61.2 GHz and an LO tuning range is 7.14 GHz, from 48.45 GHz to 55.59 GHz. The If bandwidth is 5.25 GHz(4.75~10 GHz) The conversion gain and input P1 dB are -9.5 dB and -12.5 dBm, respectively, at RF frequency of 59 GHz. The proposed single-chip receiver describes very good noise performances and linearity with very low DC power consumption of only 21.9 mW.