• KIEAE Journal
• /
• 제15권4호
• /
• pp.77-84
• /
• 2015

Purpose: In 2008, As the green growth policy was presented, Green Building is made any effort to propagation. In this paper, the respective technologies that are able to considerably reduce the energy demands for heating, cooling, hot-water, lighting and ventilation among the variety of technologies were selected. Method: Design factors such as (1) External insulation, (2) Triple glazing window, (3) LED lighting, (4) External venetian blind, (5) Geothermal and (6) Heat recovery ventilator were derived. In addition, energy saving effects in terms of energy demand, energy consumption and energy cost were investigated using EnergyPlus, building energy analysis tool. Result : The results were as follows. (1) It can be seen that high insulated triple glazing window, heat recovery ventilator and external insulation technology is excellent for energy demand. (2) Unlike energy demand, saving effect of energy consumption and energy cost was shown in order of Geothermal > Triple Window > Heat recovery Ventilation> Insulation> LED Lighting > EVB Blind.

• 한국전기전자재료학회논문지
• /
• 제34권2호
• /
• pp.121-125
• /
• 2021

The machine vision technology has been widely used in the industrialized nations like the United States, Japan, and EU in the various industries from the late 1980s. Machine vision inspection system mainly consists of a camera, optics, illumination and an image acquisition system. Optimization of the illumination light source is very important. This paper shows a comparison between Pulse Width Modulation (PWM) control and strobe control in driving LED lighting system for machine vision. PWM control method has problems such as a temperature rising of LED and a flickering in image measurement for inspection. In contrast, the proposed strobe control method can suppress the temperature of LED light source below 40℃. Also, it can remove the flickering problem through a synchronization between a frame grabber and a camera shutter. Finally, the strobe control method was shown to extract clearer images with a high precision compared to PWM control method.

• 디지털융복합연구
• /
• 제19권2호
• /
• pp.365-371
• /
• 2021

분 논문은 도시의 야간 조명연출에 사용되고 있는 조명 기술 및 유형에 대해 연구하였다. 현 사회의 생활방식과 생활양식이 지속적으로 변화하고 혁신되어지면서 도시의 다양한 기능은 끊임없이 발전하고 있다. 현재 도시의 야간 조명은 낮 시간대의 경관을 조명기구를 통해 밤에 밝히는 것에 머물지 않고, 새로운 디지털 조명기술을 활용하여 독창적이고 지속적인 변화가 가능한 혁신적인 디지털 야경을 연출하고 있다. 이러한 도시의 야간 조명연출은 현대적인 디지털 아트와 융합하면서 도시의 브랜드 이미지를 높이고, 경제적 발전에도 영향력을 미친다. 그러므로 새로운 도시의 건설에서 야간 경관을 결정하는 디지털 조명연출은 중요한 연구가치를 가지게 되었으며, 혁신적인 조명연출 기술의 발달로 앞으로도 도시의 야경은 더욱 다양한 영상디자인적 경험을 제공 할 것으로 사료된다.

• 생물환경조절학회지
• /
• 제21권3호
• /
• pp.220-227
• /
• 2012

폐쇄형 묘생산 시스템에서 청색LED, 적색LED, 백색형광등을 인공광원으로 이용한 가운데 파프리카의 육묘시 생장 특성과 정식 후 생장 및 초기 수량을 분석하고자 본 연구가 수행되었다. 폐쇄형 시스템에서 파프리카 육묘용 환경조건은 광주기 16/8h, 평균 PPF $204{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$, 기온 26/$20^{\circ}C$, 상대습도 70%이었다. 육묘 후 21일째에 백색형광등과 LED 하에서 생장된 파프리카 묘의 엽장, 엽폭, 엽면적 등 잎 관련지표뿐만 아니라 지상부 생체중과 건물중, 엽록소함량 등이 자연광 처리구에 비해서 크게 나타났다. 청색 LED, 적색LED 및 자연광 처리구에서의 엽면적은 대조구인 형광등 처리구와 비교할 때 각각 63%, 63%, 28%에 해당하였다. 또한 청색LED, 적색LED 및 자연광 처리구의 지상부 건물중은 각각 대조구의 64%, 50%, 22%로 나타났다. 정식 후 18일째에 엽수는 대조구에서 44매로 가장 크게 나타났다. 적색LED, 청색LED 및 자연광 처리구의 엽수는 대조구에 비해서 각각 86%, 81%, 48%로서 정식 시기와 비교할 때 엽수의 차이가 줄어들었다. 정식 후 114일째에 초장은 청색LED와 적색LED 처리구에서 상대적으로 작게 나타났다. 이러한 결과는 단색LED 하에서 육묘된 파프리카의 줄기 신장이 정식 후에 억제된 것으로 판단된다. 초기 4주 동안 수확된 파프리카는 청색LED 3.5개/plant, 적색LED 3.3개/plant, 자연광 1.0개/plant으로서 대조구 2.2개/plant에 비해서 각각 159%, 150%, 45%로 나타났다. 초기수량은 적색LED 453g/plant, 청색LED 403g/plant, 자연광 101g/plant으로서 대조구 273g/plant와 비교할 때 각각 166%, 148%, 37%로 나타났다. 한편 적색LED 처리구에서의 평균 중량은 136g으로서 다른 처리구와 비교할 때 상대적으로 큰 과실이 생산되었다. 한편 정식 후 온실에서의 재배기간이 길어짐에 따라 인공광 처리구와 자연광 처리구에서 수량 차이가 없었다. 이러한 결과를 종합하면 LED 또는 형광등을 인공광원으로 이용한 조건에서 육묘된 파프리카의 정식 후 초기 생육이 양호하였으며, 초기 수확이 자연광 처리구에 비해서 1주 정도 빠르게 이루어졌음을 알 수 있다. 따라서 LED 또는 형광등과 같은 인공광원이 파프리카 육묘에 이용될 경우 묘소질의 향상, 조기 수확 및 초기 수량의 증대가 기대된다.

• 조명전기설비학회논문지
• /
• 제29권6호
• /
• pp.8-13
• /
• 2015

Recently, Illumination industry of LED module has been focused to industry technology for energy conservation of nation. The LED device is excellent to power efficiency due to semiconductor light source element. And the application to the lighting circuit technology can be designed to the sensitive lighting system for human sensitivity control. In this paper, as a process for analyzing the operating temperature of standardized electronic device including LED device has analyzed about fusing character with in designed micro fuse for electronic device protection from the over current. Using the de-rating technique, which is performed to micro fuse fusing test in the range of $-30^{\circ}C{\sim}120^{\circ}C$ thermostatic chamber. To the output data in each temperature zone, it is performed to first-order linear fitting. Additionally, applying the resistance temperature coefficient and statistical data for the reliable analysis has derived to the metal element resistance of micro fuse with temperature change of the thermostatic chamber. As a research result, The changed temperature effect of thermostatic chamber was confirmed regarding fusing time change.

• 한국실내디자인학회논문집
• /
• 제23권6호
• /
• pp.78-86
• /
• 2014

Lighting in indoor space is being changed to system lighting converged with IT technology. Office space lighting with incandescent lamps and fluorescent lamps was completed through overall lighting plan by illumination in most cases, but convergence between LED lighting and IT technology enables the technology of responding to user requirements to be realized. Optical physical quantity suitable for humans and the lighting environment in accordance with user's sensibility, based on space function and user's behavior, would contribute to the improvement of service productivity, energy reduction, and enhancement of emotional satisfaction by providing user optimized lighting solution. Thus, user-customized system lighting guidelines to be applied with integration indicators of optics and sensibility are required. For the design elements required by users, environmental factors, product characteristics, optical characteristics, and sensibility factors are drawn from the design cases for office space and the survey, and the design check list and evaluation indicators are considered to reflect the requirements in the design and requirement indicators to give integrated satisfaction for optics and sensibility are developed. Purpose-centered design method from the user's viewpoint is applied to function-focused design through scenario, and it should be applied flexibly, as the new lightning design method solutions, to the concept design stage of space lighting design and device development. This paper, therefore, presents user-customized guidelines by pursuing the optics and sensibility evaluation and design method combining the requirement conditions and scenario, to be used for lighting content development and design.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제9권1호
• /
• pp.59-69
• /
• 2009

LEDs have rapidly replaced old light devices such as incandescent or fluorescent lamps, and have been widely applied in general lighting, signals, automobile, signs and others. Since LEDs are for both indoor and outdoor use, temperature and humidity inevitably affect its reliability. We explain the result of the degradation life test on LEDs, and guide to reliability analysis procedure. Analysis on reliability measures are performed by Weibull++6 program, and a common shape parameter of Weibull distribution on the LED is suggested. Also, we make a description of reliability analysis procedures for the degradation data using collected test data from degradation tests. Reliability analysis procedures are consisted of estimating degradation models and failure time, verifying of distribution and parameters of the distribution, and estimating of reliability measures. Finally, this paper suggests reliability analysis method for light characteristics on LEDs.

• 한국전기전자재료학회논문지
• /
• 제33권2호
• /
• pp.151-154
• /
• 2020

Radiation noise due to EMI noise generated by the driving circuits of LED lighting devices in a medical imaging room was reduced by decreasing the noise source in the driving circuits and changing the number of corrections in EMI filters. Noise attenuation and filter changes enabled driving circuits that reduced the electromagnetic waves. Such circuits were efficiently designed by using capacitors and inverters in a given space. Therefore, the malfunction of radiation devices can be minimized by using EMI-reduction filter circuits, and reliable operation of medical devices can be expected by blocking electromagnetic waves.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1343-1348
• /
• 2008

LEDs which have many merits are widely used in the field of light devices, and have rapidly replaced old light devices such as incandescent or fluorescent lamps. Long life, on the order of 50,000 to 100,000 hours, is one of the key features of light emitting diodes(LEDs) that has attracted the lighting community to this technology. High Power white LEDs have yet to demonstrate this capability. This paper planed accelerated life test that has two factor(temperature, current) and two levels. Finally, using ALTA programs, we estimated the common shape parameter of Weibull distribution, life-stress relationship, B10 life and accelerating factors.

• 센서학회지
• /
• 제25권2호
• /
• pp.155-159
• /
• 2016

In this work, we have developed a test system to examine whether the charge indicator of the plug-in hybrid electric vehicle (PHEV) works properly or not. In PHEV, the driver should charge the necessary electricity by plugging in manually and be able to know the charging status through the charge indicator conveniently located for the charging individual. Our system used the CAN bus to transmit the same commands from ECU to the indicator to test the proper operation of the indicator lights. It measured the electric current values during operation and analyzed to determine the quality of the indicators. The inspection items included the proper packaging, the electrical shorts, the LED lighting during charging, the LED lighting for charging failure, and the LED lighting when errors occur. We developed the system for the operators in the factory allowing them to approve the test results at the site. We developed the hardware, the control software, and the software to store the test results and the history of the products in the database. Serial numbers were given to the good quality products and the bar code labels were printed to trace the products afterwards. Through this work, we developed a system to inspect the electric parts in real time upon fabrication. We are planning to further improve our system to inspect the brightness of the indicator by adding the vision inspection in future.