• Current Optics and Photonics
• /
• 제7권6호
• /
• pp.755-760
• /
• 2023

In this paper, an illumination optical system that can mitigate the saturation phenomenon in the center of an image (caused by the typical flexible-endoscope illumination system using LEDs with Lambertian light distribution) is designed. When an LED with Lambertian light distribution is used as a light source, the amount of light in the center of the endoscopic illumination system is relatively high, compared to the periphery, causing saturation in the image. Since this phenomenon causes difficulty in detecting the patient's lesion, it is necessary to find a lighting-system design that can alleviate the saturation phenomenon. Therefore, in this paper a lighting system with bat-wing light distribution, which can lower the intensity at the center and secure the maximum amount of light at the maximum light distribution angle, is designed. In addition, to check the performance of the designed lighting system, a simulation of illumination and luminance is conducted for a system using a common aspherical lens with otherwise the same components. As a result, it is confirmed that the lighting system designed in this paper effectively reduces the luminance value at the center and secures more luminance values at the periphery than the familiar lighting system.

• 수산해양기술연구
• /
• 제50권4호
• /
• pp.511-519
• /
• 2014

This study is aimed to analyze the three-dimensional underwater irradiance using an optical simulation software and to clarify the propriety and operation method under considering luminous intensity distribution of the luring lamp and penetrability in the seawater, when we use the light diffuser type 300W high powered LED and the metal halide lamp (MHL) on a coastal squid jigging vessel in the 10-ton class, simultaneously. For their attenuation characteristics of each wavelength in relation to the sea, LED lamp was to be effective in the 1.9-fold at 50 m depth and 2.1-fold at 80 m for underwater irradiance more than MHL according to the power consumption. In addition, the underwater irradiance distribution using the LED and MHL combination was rather increased even when reducing total power usage up to 20% depending on the simulation with changing the configuration and lighting angle of the lamp. These results can be utilized as an evaluation method of the operation and performance of the LED lamp according to adjusting its arrangement and lighting angle.

• 조명전기설비학회논문지
• /
• 제20권1호
• /
• pp.1-6
• /
• 2006

반도체 광원(LED소자)을 이용한 새로운 해상용 등명기의 경우 기존의 해상용 등명기와는 발광 원리 및 발광 방식이 다르며, LED는 반도체 소자로서 외기 환경(온도)의 변화에 따른 그 특성이 변화하는 문제점을 내포하고 있어, 본 논문에서는 우리나라의 계절적 변화에 적응되고, 해양 환경 특성에 적합한 LED 등명기를 개발하여 현재 사용중인 등명기의 문제점을 해소하고 품질 개선, 시인효과 및 신뢰성 향상으로 이용자에게 양질의 서비스를 제공하고 선박의 안전운항에 기여하고자 하였다. 이를 위하여 기존 전구식 등명기의 기술기준, 고휘도 LED 광원을 이용한 고광도 등명기 광원 선계, 및 고휘도 LED 등명기의 실효광도 및 색도의 측정 분석시험에 대해 연구를 수행하였다.

• 디지털산업정보학회논문지
• /
• 제7권1호
• /
• pp.63-74
• /
• 2011

LED design works make user experience the conditions of time and space, and enable maximized spatial exploration and pursuit of ultimate sources. Light itself includes an ample dimension of time and, through the process of on and off, time-duration, similarity, and discontinuation is reorganized. LED design works make people experience the conditions of time and space, and enable maximized spatial exploration and pursuit of ultimate sources. LED design have been approached more from the viewpoint of material than from the viewpoint of aesthetics. LED based environmental design will be embedded deeply into our life with the technology of ubiquitous city. As the problem of the light intensity, tempo of change LED motion graphic and colors, substitutability is almost completely resolved now, LED is have more potentials than any other material as a tool of motion graphic. These result well make that using of LED is could be better useful from now on. In edition, users could be offered better beneficial lighting environment, and they will enjoy their better lives in the future.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2004년도 학술대회 논문집
• /
• pp.145-150
• /
• 2004

The LED lighting used spot-light illuminate the limited surface. So it is a key-point to condense wide emission angle of high power light emitting diodes (LEDs) to narrow that angle. In this paper, the secondary optics was designed by lens-makers formula for concentration rays of LED into specific region. So, it simulated the optics that designed by lens makers-formula in the optical design program, LightTools. And then, show the p propriety of lens design utilizing simulation result, luminous intensity, emission angle.

• 전자공학회논문지
• /
• 제51권7호
• /
• pp.89-95
• /
• 2014

주위 밝기 및 환경에 따라서 LED 조명등의 밝기를 조절하기 위한 장치를 PWM 기술과 전력 소자를 이용하여 구현하였다. 주위의 광량 측정을 위하여 CdS 센서를 사용하였으며, PWM 신호 생성을 위하여 MCU를 사용하여 제어 보드를 설계한 다음 광량에 따라 듀티비를 조절하였다. 고전압, 대전류를 필요로 하는 LED 조명등을 디밍하기 위하여 전력 소자를 사용하여 DC 전원장치의 출력을 스위칭하였으며, PowerMOSFET, IGBT, PowerBJT를 각각 사용하여 특성을 서로 비교하였다. 실험결과 선형성 면에서는 IGBT가 양호하였으나, 효율 및 가격 면까지 고려하면 PowerBJT도 우수한 특성을 보였다.

• 원예과학기술지
• /
• 제31권4호
• /
• pp.400-406
• /
• 2013

This study was conducted to investigate the growth and flowering of African marigold (Tagetes erecta L.) and salvia (Salvia splendens F. Sello ex Ruem & Schult.) seedlings before and after storage under fluorescent lamps and green LED radiation conditions with different light intensities during storage. The both seedlings were kept under a storage room controlled at $8^{\circ}C$ air temperature and $40{\pm}10%$ relative humidity conditions. Light intensities were maintained at 15 and $30{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ during storage. In lighting treatments, dry weight of African marigold at 28 days after storage was not significantly different, and decreased approximately 29% compared to pre-storage under dark treatment. There was no significant difference in the leaf area of salvia seedlings stored under dark condition compared to before storage, but the leaf area under green light radiation with higher light intensity (treatment GH) was two times greater than before storage. The survival rate after transplanting of African marigold stored under dark condition was 10%, and days to flowering increased compared to those stored under fluorescent and green light with higher light intensity (treatment FLH, GH). Comparing to before storage, growth and flowering of the both seedlings after storage were significantly promoted by the light exposure during storage. The present experimental results show that the light intensity should be decided to maintain minimum growth during lighting storage and storage quality of the seedlings such as flowering promotion and extended blooming period after lighting treatment during storage period from the above results.

• 한국환경농학회지
• /
• 제30권4호
• /
• pp.382-389
• /
• 2011

BACKGROUND: Light-emitting diodes (LEDs) with lower electric cost and the specific wavelength have been considering as a novel light source for plant production in greenhouse conditions as well as in a closed culture system. Supplementary lighting for day-length extension was considered as light intensity, light quality, and/or photoperiod control on plant growth and development. Effects of supplementary blue or red LED radiation with lower light intensity on growth of Ageratum (Ageratum houstonianum Mill., cv. Blue Field), African marigold (Tagetes erecta L., cv. Orange Boy), and Salvia (Salvia splendens F. Sello ex Ruem & Schult., cv. Red Vista) were discussed during sunrise and sunset twilight in the experiment. METHODS AND RESULTS: Supplementary lighting by blue and red LEDs for 30 (Treatment B30; R30) or 60 (Treatment B60; R60) min. per day were established in greenhouse conditions. Photosynthetic photon flux for supplementary radiation was kept at $15{\mu}mol\;m^{-2}\;s^{-1}$ on the culture bed. Natural condition without supplementary light was considered as a control. The highest shoot and root dry weights were shown in African marigold exposed by red light for 60 min. per day. Supplementary blue and red lighting regardless of the radiation time significantly stimulated development of lateral branches in African marigold. Stem growth in Ageratum and Salvia seedlings was significantly promoted by red radiation as well as natural light. CONCLUSIONS: Extending of the radiation time at sunrise and sunset twilight using LEDs stimulated reproductive growth of flowering plant species. Different characteristics on growth under supplementary blue or red lighting conditions were also observed in the seedlings during supplementary radiation.

• 대한두경부종양학회지
• /
• 제26권2호
• /
• pp.187-192
• /
• 2010

Background and Objectives : LED(Light emitting diode) is recently introduced as a energy-saving light source in many area including agriculture and environment. In medical field it is known as bright and safe light source in surgical lighting including headlight. This study is aimed to test effectiveness and cost-saving of mountain-climbing headlight in comparison with xenon headlight. Materials and Methods : Internet market-available mountain-climbing headlight was compared with medical xenon headlight regarding heat generation after 30 minutes' usage, intensity of illumination and possible burn to the perioral skin. To get temperature data, 5 cases of tonsillectomy were done with the aid of LED headlight, while another 5 tonsillectomies were done using xenon headlight. Results : The temperatures of all light sources were below 45 degrees Celcius until finish of the surgery without burn or complications. No differences in operation time with both headlights. The maximal intensities of illumination were 24000 Lux for xenon, 20000 Lux for LED. Conclusion : Mountain-climbing headlight could be safe and helpful light source with low cost in simple oral surgery.

• 한국생산제조학회지
• /
• 제24권4호
• /
• pp.448-454
• /
• 2015

In this paper, the band structural design that is typically in a line was arranged in a ring shape, so as to configure the high power LED lighting in such a way as to form a concentrated light distribution angle of less than 15 degrees. The parabolic aluminized reflector PAR38 that facilitates design using area and the area of the optical system to the same extent, applied a multiple light-source condenser lens optical system for the control of integration. The LED used here implemented a single linear light source using ans LED module with ans LED, flip-chip chip-scale package. The optical system was designed based on the energy star standard.