Journal of the Institute of Electronics and Information Engineers (전자공학회논문지)

The Institute of Electronics and Information Engineers (대한전자공학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on LED Light Dimming using Power Device

전력소자를 사용한 LED 조명 디밍에 관한 연구

  • 김동식 (호서대학교 전자공학과) ;
  • 채상훈 (호서대학교 전자공학과)
  • Received : 2014.03.12
  • Accepted : 2014.07.01
  • Published : 2014.07.25
Download PDF
⟨ Previous Next ⟩

Abstract

An LED lighting which adjusted brightness according to the surround ambient implemented using PWM technology and power devices. To measure the brightness of surround ambient a CdS sensor was used. A control board for the generation of the PWM signal was made using a MCU and duty ratio was controlled according to light intensity of surround ambient of the system. To drive the LED lamps which require high-voltage and high-current power devices were used for switching the DC power supply. Measurement results show that the IGBT is excellent as only lineality but the PowerBJT is more good to consider to efficiency and cost.

주위 밝기 및 환경에 따라서 LED 조명등의 밝기를 조절하기 위한 장치를 PWM 기술과 전력 소자를 이용하여 구현하였다. 주위의 광량 측정을 위하여 CdS 센서를 사용하였으며, PWM 신호 생성을 위하여 MCU를 사용하여 제어 보드를 설계한 다음 광량에 따라 듀티비를 조절하였다. 고전압, 대전류를 필요로 하는 LED 조명등을 디밍하기 위하여 전력 소자를 사용하여 DC 전원장치의 출력을 스위칭하였으며, PowerMOSFET, IGBT, PowerBJT를 각각 사용하여 특성을 서로 비교하였다. 실험결과 선형성 면에서는 IGBT가 양호하였으나, 효율 및 가격 면까지 고려하면 PowerBJT도 우수한 특성을 보였다.

Keywords

References

  1. S. B. Song, "Technologies and goods of LED lights," J. of KIIEIE, vol. 2, no. 5, pp. 19-28, Sep. 2011.
  2. B. S. Lee, Y. S. Kim, "A study of lighting fixtures power supply that use current control", J. of IEEK SD, vol. 49. no. 11, pp.193-198, Nov. 2012.
  3. Gacio D, Alonso J. M, Garcia J, Campa L, "High frequency PWM dimming technique for high power factor converters in LED lighting", Applied Power Electronics Conference and Exposition (APEC), pp.743-749, 2010.
  4. Chanho Park, Kwyro Lee, "Shallow Saturation and Fast Switching Characteristics of the Power BJT with Corrugated Base Junctions", Solid-State Device Research Conference, pp.259-262, 2001.
  5. S. J. Finney, B. W. Williams, T. C. Green, Heriot-Watt, "IGBT Turn-off Characteristics and High Frequency Application", Electron Devices, IEE, pp.5/1-5/4, 1994.
  6. Adler, M. S, Owyang, K. W, Baliga, B. Jayant, Kokosa, R. A, "The evolution of power device technology", Electron Devices, IEEE Transactions on Vol.31, Issue.11, pp.1570-1591, 1984. https://doi.org/10.1109/T-ED.1984.21754

Cited by

  1. Development of the LED Street Lamp by using Wired and Wireless Remote Control System vol.51, pp.10, 2014, https://doi.org/10.5573/ieie.2014.51.10.235