• Mass Spectrometry Letters
• /
• 제5권3호
• /
• pp.89-93
• /
• 2014

Lincomycin is one of the major species among the Pharmaceuticals and Personal Care Products (PPCPs) detected from the four major rivers in Korea. The structure characterization was performed of six degradation products of lincomycin formed under the irradiation of electron beam, and the degradation efficiency as a function of the various irradiation dose and sample concentration was investigated. Electron beam (10 MeV, 0.5 mA and 5 kW) experiments for the structural characterization of degradation products that are fortified with lincomycin, were performed at the dose of 10 kGy. The separation of degradation products and lincomycin was carried out using a C18 column ($2.1{\times}100$ mm, $3.5{\mu}m$), using gradient elution with 20 mM ammonium acetate and acetonitrile. The structures of six degradation products of lincomycin were proposed by interpretation of mass spectra and chromatograms by LC-MS/MS. The mass fragmentation pathways of mass spectra in tandem mass spectrometry were also proposed. Experiments were performed of the degradation efficiency as a function of the irradiation dose intensity and the initial concentration of lincomycin in an aqueous environment. In addition, increased degradation efficiency was observed with a higher dose of electron beam and lower concentration.

• Journal of Magnetics
• /
• 제12권1호
• /
• pp.35-39
• /
• 2007

A highly sensitive magnetic sensor using the Giant MagnetoImpedance effect has been developed. The sensor performance is studied and estimated. The sensor circuitry consists of a square wave generator (driving source), a sensing element in a form of composite wire of a 25 $\mu$m copper core electrodeposited with a thin layer of soft magnetic material ($Ni_{80}Fe_{20}$), and two amplifier stages for improving the gain, switching mechanism, scaler circuit, an AC power source driving the permeability of the magnetic coating layer of the sensing element into a dynamic state, and a signal pickup LC circuit formed by a pickup coil and an capacitor. Experimental studies on sensor have been carried out to investigate the key parameters in relation to the sensor sensitivity and resolution. The results showed that for high sensitivity and resolution, the frequency and magnitude of the ac driving current through the sensing element each has an optimum value, the resonance frequency of the signal pickup LC circuit should be equal to or twice as the driving frequency on the sensing element, and the anisotropy of the magnetic coating layer of the sensing wire element should be longitudinal.

• 대한한의학방제학회지
• /
• 제20권1호
• /
• pp.51-65
• /
• 2012

Objectives : In this study the antidepressant effects of mixture of Lycii Radicis Cortex and Gardeniae Fructus on the change of HPA-Axis and Catecholamine system was investigated Methods : The forced swimming test was performed. The expression of CRF, c-Fos in the PVN, and TH in the VTA and LC were measured with immunohistochemical method. And the experimental groups were divided into the Extraction after Mix group(A) and Mix after Extraction group(B). The effects of both group were compared. Results : The duration of immobility in the FST was decreased significantly in three groups except B100(P<0.01). B100 was shown the significant increase(P<0.05). The expression of CRF in PVN was decreased significantly in all group(P<0.05~P<0.01). The expression of c-Fos in PVN was decreased in A100, A400 and was increased significantly in B100, B400(P<0.05). The expression of TH in VTA and LC were decreased significantly in all group(P<0.001). Conclusions : Effects of Extraction after Mix group(A) and Mix after Extraction group(B) on the HPA-Axis system and Catecholamine system were validated.

• 대한전자공학회논문지SD
• /
• 제43권9호
• /
• pp.10-16
• /
• 2006

본 논문에서는 PHS 어플리케이션에서 새로운 Coarse Toning 기법을 사용한 빠른 스위칭의 CMOS 주파수 합성기를 기술하였다. 제안한 Coarse Tuning 방법은 Phase Noise와 Lock-Time을 최적화하기 위해 LC-VCO의 적절한 Tuning Capacitances를 선택하는 것이다. 이를 바탕으로 측정된 Lock-Time은 약 $20{\mu}s$ 이고, Phase Noise는 600kHz의 offset에서 -121dBc/Hz이다. 칩은 $0.25{\mu}m$ CMOS 공정으로 제작하였고, 면적은 $0.7mm{\times}2.1mm$ 이다. 소비전력은 2.7V 공급 전압 하에서 54mW 이다.

• 한국환경과학회지
• /
• 제20권10호
• /
• pp.1221-1232
• /
• 2011

We investigated the toxic effects of difenoconazole on the development in the African clawed frog, Xenopus laevis. To test the toxic effects, frog embryo teratogenesis assays using Xenopus were performed. Embryos were exposed to various concentrations of difenoconazole (0-30 ${\mu}M$). $LC_{100}$ for difenoconazole was 30 ${\mu}M$, and the $LC_{50}$ determined by probit analysis was 27.19 ${\mu}M$. Exposure to difenoconazole concentrations ${\geq}$5 ${\mu}M$ resulted in 10 different types of severe external malformation. Histological examinations revealed dysplasia of the eye, heart, liver, somatic muscle, and swelling of the pronephric ducts. The tissue-specific toxic effects were investigated with an animal cap assay. Blood cells were normally induced at a high frequency by mSCF and activin A. However, the induction of blood cells was strongly inhibited by the addition of difenoconazole. Electron micrographs of tested embryos showed the degeneration of somatic muscle and the shrinkage of microvilli on pronephric duct. The gene expression of cultivated animal cap explants was investigated by reverse transcriptase-polymerase chain reaction (RT-PCR). It revealed that the expression of the blood-specific marker(${\beta}$-globin II) and muscle-specific marker (XMA) were more strongly inhibited than the neural-specific marker(XEn2) by the addition of difenoconazole.

• Environmental Analysis Health and Toxicology
• /
• 제24권3호
• /
• pp.181-191
• /
• 2009

As an effort to prevent serious accidents involving oxygen deficiency and suffocation in confined spaces and to identify the causes of such accidents, the present study investigated relevant accidents and systems in Korea and other countries. This study also conducted a number of experiments at lethal concentration levels of oxygen deficiency using SD rats and observed the changes of experimental animals with humidity, organic gas (toluene), hydrogen sulfide, carbon monoxide and so on at the oxygen deficient environment. The results of the study are as follows. 1. The results from the experiment conducted using SD rats at lethal concentration levels of oxygen showed that there were no casualties at the 7% oxygen concentration level, but the mortality increase to 20% at 6% oxygen, it was jumped to 90% at 5% oxygen, and it was also dramatically reached 100% at 4% oxygen concentration. Therefore, 5.5% was calculated as the $LC_{50}$ (rat, 4hr) from these dose-response experiments with oxygen deficiency. 2. When we changed the level of toluene, $H_2S$, CO, humidity, and so on, in an oxygen deficient environment, it was observed that the small concentrations of $H_2S$ and CO make the highest effect on animals. In case of 350 ppm $H_2S$, it resulted in 30% mortality, and the 100% mortality was shown in 1,200 ppm CO concentration. The mortality increased as an oxygen deficient condition. However in the case of toluene up to 1,000 ppm, it were not affected with oxygen deficiency, and it did not indicate any significant differences in mortality as 20%, 90% humidities.

• 한국환경보건학회지
• /
• 제39권6호
• /
• pp.505-512
• /
• 2013

Objectives: Ultraviolet (UV) radiation may cause skin cancer, photo-ageing, erythema, and sunburn. Benzophenone (BP) is commonly used to protect skin from UV radiation. In Korea, sunscreen, sunblock, socalled 'blemish balm' (BB) and 'color correcting' (CC) creams, and foundation may contain from 0.5 to 5% benzophenone in order to protect skin from UV radiation. The purpose of this study is to understand the levels of benzophenone derivatives in urine among a group of university students and identify the contribution of cosmetics use. Methods: Forty volunteers (20 women and 20 men) were asked about skin type, frequency of use of cosmetics, and recognition of related health effects, etc. in a survey. Subjects were divided into several subgroups and were compared for concentration of benzophenone-1 (BP-1) and benzophenone-3 (BP-3). Their urine was pretreated with enzyme hydrolysis and solid phase extraction. Determinations of BP-1 and BP-3 in the urine were made with LC-MS/MS. Results: Among the study subjects, 82.5% used basic cosmetics at least once per day, and 77.5% used sunscreens at least once per day. The concentrations of BP-1 and BP-3 of the males were 4.36 ng/mL and 9.16 ng/mL, respectively. Those of the females were 3.98 ng/mL and 5.07 ng/mL, respectively. The use of cosmetics was positively related to urinary benzophenone levels. Conclusions: BP-1 and BP-3 were widely detected among the university students. Cosmetic use was identified as a potential source. Implications of such exposure deserve further investigation.

• 한국전기전자재료학회논문지
• /
• 제20권3호
• /
• pp.245-249
• /
• 2007

The liquid crystal display (LCD) applications treated on the organic overcoat thin film surfaces by ion beam irradiation was successfully studied. The good LC aligning capabilities treated on the organic overcoat thin film surfaces with ion beam exposure of $60^{\circ}$ for 2 min above ion beam energy of 1200 eV can be achieved. But, the alignment of defect of NLC on the organic overcoat surface at low energy of 600 eV was measured. The pretilt angle of NLC on the organic overcoat thin film surface with ion beam exposure of $60^{\circ}$ for 2 min at energy of 1800 eV was measured about 1 degree. Finally, the good thermal stability of LC alignment on the organic overcoat thin film surface with ion beam exposure of $60^{\circ}$ for 2 min until annealing temperature of $200^{\circ}C$ can be measured.

• Restorative Dentistry and Endodontics
• /
• 제19권2호
• /
• pp.447-459
• /
• 1994

The purpose of this study is to evaluate of shear bond strength of light-curing composite resin to light-curing glass ionomer cement. Composite resin and glass ionomer cement have been widely used as an esthetic filling materials in dental clinics. To achieve better clinical results, sandwich technic was developed with conpensating for disadvantages of these two materials. Especially, light-curing glass ionomer cement provided greately improved bonding strength of teeth or composite resin, and then excellent clinical results can be acquired. In this study, 6 commercial light-curing glass ionomer cements(3 commercial restorative materials : Fuji II LC, Variglass VLC, Vitremer, and 3 commercial lining materials : Fuji Lining LC, Baseline VLC, Vitrebond) were devided two groups. According to manufacturer's appointment, no surface treatment was referred to N groups. Supposing. of clinical practice, surface grinding with water spray at 320 grit sand paper, 40 seconds etching with 37% phosphoric acid, 20 seconds washing, 20 seconds air drying was referred to N groups. Totally 12 experimental groups were devided, and all 120 specimens from 10 specimens of each groups were made. After light-curing composite resin was bonded to light-curing glass ionomer cement, shear bond strength was tested by Instron universal testing machine between glass ionomer cement and composit resin. The data were analyzed statistically by Student's t-test and ANOVA. The obtained results were as follows; 1. In light-curing glass ionomer cement, restorative materials showed higher shear bond strength to composite resin than lining materials(p<0.05). 2. Variglass VLC of restorative material group and Baseline VLC of lining material group have highest shear bond strength to composite resin(p<0.001). 3. In light-curing glass ionomer cement, surface grinding and acid etching reduced shear bond strength to composite resin(p<0.001)}. 4. VGN group 1s highest shear bond strength to composite resin, VBE group is lowest shear bond strength to composite resin(p<0.001).

• 융합신호처리학회논문지
• /
• 제4권1호
• /
• pp.41-48
• /
• 2003

본 논문에서는 DGS(Defected Ground Structure)에 대한 새로운 등가 회로를 제안하였으며, 이를 IMT-2000용 AB급 대전력 증폭기 설계에 적용하여 증폭기의 성능을 향상시켰다. 새로운 DGS 등가 회로는 병렬의 LC 공진기와 병렬 형태의 캐패시턴스로 구성되어 금속 접지면에 에칭된 결함으로 인한 프린징(fringing) 효과를 반영하도록 하였으며, 전력 증폭기 출 단 정합 회로를 최적화하기 위하여 사용되었다. 이전의 논문에서도 하모닉 성분의 억제와 증폭기의 효율 개선을 위하여 DGS를 사용하였으나 DGS 등가 회로의 해석은 없었으며(1), 본 논문에서는 이를 개선하여 회로 시뮬레이션을 통한 정한 DGS의 등가 회로를 AB급 증폭기의 출력 단 정합회로에 적용함으로써 성능 향상과 함께 증폭기 제작 후에 튜닝이 거의 필요없는 정확한 설계 방법을 제시하였다. 이와 같이 제안된 전력 증폭기의 설계 방법은 정확한 설계 결과를 제공함으로써 최적 부하 조건과 하모닉 성분의 제거 성능을 동시에 만족시킬 수 있었다. 제안된 방법의 효과를 입증하기 위하여 DGS를 적용한 기존의 방법과 새로이 제안된 방법을 사용하여 20W급의 전력 증폭기를 설계 및 제작하였으며, 그 측정 결과를 비교하였다.