• Animal Bioscience
• /
• v.35 no.5
• /
• pp.677-689
• /
• 2022

Objective: This study was conducted to evaluate the effects of concentrate level and chromium-methionine (Cr-Met) supplementation on the growth performance, carcass characteristics, meat quality, and fatty acid composition of Tan lambs. Methods: Sixty male Tan lambs (21±1.23 kg body weight) fed a finishing diet (concentrate-to-forage ratio: 35:65 [LC group] or 55:45 [HC group]) with daily Cr-Met supplementation (0, 0.75, or 1.50 g) were used in a completely randomized design with a 2×3 factorial arrangement of treatments. Results: Lambs from the HC group had higher average daily gain, dry matter (DM) digestibility, dressing percentages, leg proportions, intramuscular fat (IMF) contents, and saturated fatty acid levels, but lower feed conversion ratios, globulin (GLB) and total protein (TP) concentrations, shear force, and monounsaturated fatty acid (MUFA) levels (all p<0.05). Cr-Met supplementation increased the DM digestibility, GLB and TP concentrations, rack and loin percentages, and cooking loss, but decreased the IMF contents and leg proportions (all p<0.05). Cr-Met supplementation at 0.75 g/d increased the conjugated linoleic acid (CLA) content in both the HC and LC groups (p<0.01). Significant interactions between the concentrate level and Cr-Met dosage were observed for MUFA (p<0.01) and polyunsaturated fatty acid (PUFA) (p<0.01) levels. Meat from the lambs fed an unsupplemented LC diet presented the highest PUFA and MUFA levels (p<0.01). However, the MUFA and PUFA levels decreased significantly with increasing Cr-Met supplementation levels in the LC group (p<0.01), whereas the opposite trend was seen in the HC group. Conclusion: The HC diet improved the growth performance of Tan lambs, increased their profitability by increasing leg and rack joint proportions, and improved meat quality by promoting an IMF content that was more visibly acceptable to consumers. Cr-Met supplementation at 0.75 g/d in a HC diet was the best choice and may be economically beneficial.

• Proceedings of the Optical Society of Korea Conference
• /
• 2007.02a
• /
• pp.50-51
• /
• 2007

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.831-833
• /
• 2004

A novel transflective-type LC mode with good display performance has been developed In order to drive both transmissive and reflective modes simultaneously without any modulation of gamma in a single-gap structure, we have introduced a new design concept in the reflective region, where the capacitance is separated into liquid crystal($C_{LC}$} and organic layer($C_{OL}$), playing a key role as a voltage divider in our cap-divided VA-mode. With this cap-divided method having both merits of simplifying process and good legibility, we have achieved good optical characteristics such as high contrast ratio and wide viewing angle in a single-gap homeotropic panel design.

• Korean Institute of Interior Design Journal
• /
• v.14 no.5 s.52
• /
• pp.218-225
• /
• 2005

In this apartment market, many apartments are being reconstructed within even less than 20 years from their first construction. This entails many problems in environmental and economical facets, for which many researches are under way in several institutions and universities. International cases show that the international trend goes for remodeling of maintenance, management, and repairing rather than new building. The purpose of this study is to investigate the factors of cost evaluation for establishing the time period of apartment based on durability of material and equipment while considering the economic feasibility of apartment, when remodeling as a concept of sustainability regarding building is being vitalized. This study investigates the proper period of remodeling in consideration of weight accruing to the LC(Life Cycle) and cost based on the standardized durability. The weight of cost, period establishment analysis, and LC according durability varies the data values of remodeling periods. The physical durability and cost from this data enable the investigation into not only the repair period of individual materials of the apartment but also remodeling period.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.7
• /
• pp.647-651
• /
• 2005

We studied the external pressure-stable advanced frnge field switching (FFS) pixel design with 3 slit sructue. In this mode, a patterned pixel slit is partitioned into 3 areas, namely, two edges and a center, where the edge slit angle is larger than the center slit angle. Thus the reverse twist region in the pixel edge is reduced comparing to the conventional FFS mode so that the LC dynamics in this region becomes very stable. And also, when the external pressure is applied to the panel at the high voltage, the disclination lines (DLs) were barely intruded into active area. Therefore, the structure is use for the pen based system such as the tablet personal computer (PC), personal digital asistant (PDA).

• Journal of electromagnetic engineering and science
• /
• v.9 no.2
• /
• pp.98-104
• /
• 2009

An InGaP/GaAs MMIC LC VCO designed with Harmonic Noise Frequency Filtering(HNFF) technique is presented. In this VCO, internal inductance is found to lower the phase noise, based on an analytic understanding of phase noise. This VCO directly drives the on-chip double balanced mixer to convert RF carrier to IF frequency through local oscillator. Furthermore, final power performance is improved by output amplifier. This paper presents the design for a 1.721 GHz enhanced LC VCO, high power double balance mixer, and output amplifier that have been designed to optimize low phase noise and high output power. The presented asymmetric inductance tank(AIT) VCO exhibited a phase noise of -133.96 dBc/Hz at 1 MHz offset and a tuning range from 1.46 GHz to 1.721 GHz. In measurement, on-chip down-converter shows a third-order input intercept point(IIP3) of 12.55 dBm, a third-order output intercept point(OIP3) of 21.45 dBm, an RF return loss of -31 dB, and an IF return loss of -26 dB. The RF-IF isolation is -57 dB. Also, a conversion gain is 8.9 dB through output amplifier. The total on-chip down-converter is implanted in 2.56${\times}$1.07 mm$^2$ of chip area.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2000.12a
• /
• pp.209-212
• /
• 2000

This paper describes the design and implementation of a hard- wired AGV controller using CPLD(Complex Programmable Logic Device). The proposed controller manages a guidance equipment, motor and I/O sequence controller for a self-control traveling. Compared with a conventional $\mu$-processor, the CPLD controller using a hard-wired control method can reduce a difficult programming process. Also, the total costs of production are reduced, such as development time, product's size and difficulty because memory, combinational logic and sequential logics are implemented by CPLD. The Controller designed using behavioral description method with VHDL and was synthesized by MAX＋Plus II of the ALTERA co. We implemented controller using EPF10K10LC84-4 device.

• Journal of Korean Society of Water and Wastewater
• /
• v.34 no.1
• /
• pp.61-73
• /
• 2020

Tetracycline is one of the most commonly used antibiotics in domestic and foreign livestock industries to suppress the growth of pathogens. Tetracycline has been reported as a non-biodegradable compound. Therefore it has been not completely removed in the sewage treatment process. In this study, tetracycline was degraded using liquid ferrate (VI). Based on these experiments, the optimal water condition (pH and water temperature) were selected, appropriate liquid ferrate (VI) dosage was calculated, and finally the degradation pathway was estimated with the intermediate products detected by LC/MS/MS. All degradation experiments were completed within 30 seconds and the optimal condition was obtained in basic condition (pH 10) at room temperature (20℃). And the appropriate molar ratio between tetracycline and liquid ferrate (VI) was 12.5:1. Finally, 12 intermediate products were detected with LC/MS/MS and the degradation pathways and the degradation pathways and proposed the degradation pathways.

• Proceedings of the IEEK Conference
• /
• 2002.06e
• /
• pp.307-310
• /
• 2002

A design for the input filter and the output filter of a single-phase UPS system is proposed. And also, this paper describes a reduction of the DC voltage ripple of a single-phase UPS. The input power of proposed UPS fluctuates with twice frequency of the utility source, which causes DC voltage fluctuation. The reduction of the DC voltage fluctuation requires a large DC link capacitor. The proposed method uses a LC series resonant filter paralleled with a conventional smoothing capacitor. The effectiveness of the proposed method was confirmed by simulation results.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2000.01a
• /
• pp.59-60
• /
• 2000

We have developed the LCD Simulator, which is called "ProLCD", in order to reduce time and efforts for the design and analysis of LCDs. We describe the numerical models implementing the computation of LC directors and electro-optics, the graphic user interface and the visualization modules. Many applications show that ProLCD is a very useful, interactive design tool with good reliability.