• 한국기계가공학회지
• /
• 제4권4호
• /
• pp.48-53
• /
• 2005

This research is materialized the mechanism of a interlocking elevator device to meet with customer's requirement demanding a variety of function. On this suitably theoretical translation and by considering of material significance of the most factor's tension spring and torsion spring, it's compared and reviewed the stress's calculation according that SWC and SWPB applied differently. And also that is approved through actual experiment. Out of a variety of feasible movement. Torque Balance is materialized by combination of tension spring, torsion spring and disk spring. So that application of 3 factors for optimal design is very important factor. In future, this research thesis make sure to play a highly role for application and improvement mechanically in various industry sector out of materializing interlock.

• 한국IT서비스학회지
• /
• 제10권4호
• /
• pp.295-307
• /
• 2011

The purpose of this research is to find a better knowledge service R&D management process. There are four basic characteristics in service : intangibility, inseparability, inconsistency, and no inventory. These intrinsic characteristics require us to change the traditional manufacturing sector based R&D management process. It is necessary to develop an effective knowledge service R&D management model to improve the competitiveness of the service industry and Korean economy. A model case knowledge service R&D has been performed to find a better R&D management model. The whole cycle of R&D process, such as planning, selection, performing, and evaluation has been reviewed by real experience. Several important aspects of R&D process are compared between manufacturing R&D and service R&D. A knowledge service R&D management framework has been suggested. The results of this research can be used for building a better service R&D management process.

• 신재생에너지
• /
• 제7권1호
• /
• pp.8-14
• /
• 2011

As is the case in Korea, the expansion of renewable energy dissemination is an essential matter in Ukraine when considering its energy consumption and dependence on energy import. While Korea has set about promoting the new and renewable energy industry on the back of the national policy on green growth, Ukraine expects a virtuous circle of renewable energy industry with green tariffs and the attraction of foreign capital in association with carbon emission trade. Utilizing its well-developed heavy industrial sector including the shipbuilding and automobile industries, Korea expects wind turbine manufacturing to become one of its next-generation growth engines. Ukraine is also trying to enter the wind turbine system or parts manufacturing industry based on its automobile industry and advanced aerospace technology. Although the Crimean region in Ukraine seems to have excellent wind resources, and thus shows great potential as a location for wind farm development, political instability has been a major obstacle to the attraction of foreign capital, leading to delayed investment.

• 기술혁신연구
• /
• 제14권3호
• /
• pp.23-42
• /
• 2006

This study investigates the determinants of output of a manufacturing firm's innovative activity (the number of patent applications) and spillover effects using a count data model. This paper attempted a negative binomial distribution In order to take into account unobserved heterogeneity. The results of our study suggested that Firm size, R&D intensity, technical network activity, and online business performance have significantly positive effects in the Korean manufacturing industry. Moreover, there are significantly positive spillover effects in the same industry sector.

• 한국CDE학회논문집
• /
• 제14권3호
• /
• pp.168-175
• /
• 2009

A recent advance in RFID technology is one of the major technological drives in reducing cost in logistics, distribution and even in the manufacturing sector. However, currently the technology is practically accepted only in the area of logistics and inventory control. The characteristic of these application areas is that the technology is used in the controllable environment. In this paper, we discuss a case study of using active and passive RFID technologies to automatically gather process information in the mold factory. Active RFID tags are attached on the main parts of molds and their positions in the floor are tracked with the routers. We also discuss on the idea of using mobile device with RFID reader to inquire information for molds on the spot in the factory floor. The inquirable information includes 3D design data and basic mold data. The paper shows implementation results with hardware configuration for the testbed.

• 무역학회지
• /
• 제44권1호
• /
• pp.1-15
• /
• 2019

This study aims to analyze the effects of trade on human capital accumulation and economic growth in Korean manufacturing industry. The results of empirical analysis by dynamic panel model are as follows. The increase in exports of skilled labor intensive industries has a positive effect on human capital and economic growth, and the impact of import on human capital accumulation and economic growth has alst a positive impact. The exports of unskilled intensive labor industries have a negative impact on human capital accumulation and economic growth. Imports of unskilled labor intensive industries have negative on human capital accumulation and economic growth. It is difficult to derive statistically significant results for the effects of trade on human capital accumulation and economic growth before and after 2008. However, as a result of the financial crisis in 2008, it seems that the effects have decreased since 2008.

• KDI Journal of Economic Policy
• /
• 제44권3호
• /
• pp.75-99
• /
• 2022

This paper analyzes job creation when the Korean economy transitioned to a knowledge economy from the 1990s to the 2010s. During this period, the ratio of service to manufacturing jobs increased, knowledge intensive industries grew, and job creation became geographically concentrated around Seoul. The changes slowed down in the 2010s, and overall job growth weakened. To analyze the effect of job creation driver industries during this period, the main part of which are knowledge intensive tradable service industries, on local service job creation, I use a modified version of the local labor market of Moretti (2010). I analyze the job changes during 1995-2005 and during 2006-2016 in 237 Si-Gun-Gu areas in the Census on Establishments datasets. I find that one manufacturing job creates 0.5 local service jobs and that one tradable service job creates 1.1 jobs within Gu areas of metro cities and 2.3 jobs in Si-Gun areas. The job creation relationship between the tradable and local service sectors was not altered in this period. As more jobs were created in the tradable sector driven by the transition to a knowledge economy, job creation overall remained active, with the opposite also being true.

• 기술혁신학회지
• /
• 제16권3호
• /
• pp.559-581
• /
• 2013

지난 수년간 서비스 산업은 빠르게 성장해 왔으며, 현재도 그 성장가능성이 매우 높다. 때문에 서비스 산업의 생산성 및 혁신활동이 국가경제발전의 중요한 요소로 관심을 받기 시작하였다. 그럼에도 불구하고, 제조분야에서의 혁신과 관련된 연구들은 활발히 이루어진 것과 달리, 서비스 산업에서의 혁신 활동의 특성에 대한 연구는 상대적으로 부족하였다. 특히, 서비스 혁신은 서비스에 따라 상이하게 나타날 수 있기 때문에 이에 대한 연구가 반드시 필요하다. 따라서 본 연구는 서비스 유형별 혁신활동의 특성을 비교 및 분석하는 것을 그 목적으로 하고자 한다. 이를 위해, 첫째, 과학기술정책연구원(STEPI)의 기술혁신조사(KIS) 서비스업 분야 데이터를 활용한다. 둘째, 서비스의 고객화 정도와 설비의 중요도를 기준으로 서비스의 유형화를 수행한다. 셋째, 각 서비스 유형별 혁신활동의 특성을 혁신활동의 투입, 프로세스, 산출의 관점에서 분석한다. 연구 결과, 각 서비스 유형은 고유의 혁신활동 패턴을 가지고 있는 것으로 나타났으며, 이는 서비스 유형의 특성에 대한 가치 있는 정보를 제공함으로써 서비스 분야에서의 혁신활동에 대한 추후 연구를 위한 기초적인 자료를 제공해 줄 수 있을 것으로 기대한다.

• 벤처혁신연구
• /
• 제5권4호
• /
• pp.109-115
• /
• 2022

본 연구는 주요국 정책을 토대로 중소 제조기업의 디지털 전환 현황과 문제점을 진단하고, 이에 대응하기 위한 개선방안을 제시하고자 한다. 디지털 전환은 비대면 경제 및 디지털 기술에 대한 요구가 부상하면서 산업 패러다임이 변화하였다. 이에 주요국들은 디지털 전환 관련 정책을 추진중에 있으며, 우리나라도 한국형 뉴딜 정책을 시행중에 있다. 다만, 한편, 우리나라는 주요국의 디지털 전환 정책 전략을 그대로 차용하고 있어 우리의 강점 활용 및 단점 보완을 할 수 있는 한국형 모델이 결핍되어 있다. 따라서 한국의 독자적인 표준화 작업이 시급히 진행되어야 한다. 또한 기존에는 스마트공장 보급 및 확산, 즉 양적 정책에 초점이 맞춰서 진행되었다면, 앞으로는 데이터의 활용 및 성과창출을 지향할 수 있는 질적 정책으로의 전환이 필요하다. 즉, 스마트공장 지원정책의 고도화 정책을 통하여 질적 수준을 제고시킬 수 있는 정책적 보완이 필요하다. 이에 사업의 유기적인 연계와 효율적 지원을 위하여 기관별로 추진하고 있는 정책을 공유할 필요가 있다. 따라서 사업의 유기적인 연계와 효율적 지원을 위하여 기관별로 추진 중인 정책을 공유할 필요가 있다. 중소기업의 디지털 전환에 대한 인식 수준을 제고하고 중장기적으로 기술 및 솔루션 개발을 지원해야 한다. 따라서 향후 중소 제조기업의 디지털 전환 정책은 중소기업의 질적 수준시킬 수 있는 방안을 모색할 필요가 있다는 것을 제시함 점에서 실무적인 의의가 있다.

• 한국보건간호학회지
• /
• 제17권2호
• /
• pp.212-223
• /
• 2003

The purpose of this study was to investigate work stress and identify the various factors affecting stress in married women in working manufacturing industries. Data were collected between March 31 and June 28, 2003 from 266 married women working in 10 manufacturing industries in Korea. The self-administered questionnaire included general characteristics. social support, and work stress. The data were analyzed using descriptive statistics, t-test, ANOVA, and Cronbach's alpha. SPSS/win 11.0 was used to assist analysis. The results of the study are as follows: 1. Scores for work stress in the field of sub-categories 2. Perceived work stress was significantly different according to salary, behavior type, discomfort related to menstruation, consumption, duty type, job stability, weekly work time and family, 3. Social support had a significant negative relationship with work stress. Accordingly, stress management for married working women will be more successful if interventions not only address each person's unique needs, for example, control of perimenstrual discomforts and health behavior change, but also are accompanied by organizational management strategies and policies, for example, improvement of work environment and nursery facilities.