• 제목/요약/키워드: Km value

검색결과 893건 처리시간 0.031초

평택항 개항에 따른 배후 지역의 변화에 대한 연구 (A Study on the change of a hinterland according to the opening of a Pyeongtaek port)

  • 신영재
    • 한국지역지리학회지
    • /
    • 제19권3호
    • /
    • pp.416-435
    • /
    • 2013
  • 1986년에 개항된 평택항은 국제무역항으로서의 역할을 다하고 있다. 평택항의 배후 지역인 평택시는 도시와 농촌이 공존하는 지역이다. 본 연구의 목적은 평택항 개항에 따른 평택시의 지역의 변화를 살펴보는 것이다. 평택항과 지역 간 평균 거리(23.7km) 기준으로 인구와 지가의 변화를, 입지 계수를 통해 산업별 지역별 산업의 변화를 살펴보았다. 인구와 산업별 종사자수는 평택항에 가까울수록 증가율이 높았으며, 지가 상승률의 차이는 크지 않았다. 입지 계수로 보면, 제조업은 촌락 지역인 읍 면 지역에서, 3차 산업은 도시 지역인 동 지역에서 특화가 이루어졌다.

  • PDF

우리나라 산악기상관측망의 공간분포 특성 (The spatial distribution characteristics of Automatic Weather Stations in the mountainous area over South Korea)

  • 윤석희;장근창;원명수
    • 한국농림기상학회지
    • /
    • 제20권1호
    • /
    • pp.117-126
    • /
    • 2018
  • 본 연구는 품질평가 등급이 우수한 4개 기관에서 운영하고 있는 990개의 AWS 중에서 고도가 200m 이상인 산악지역에 분포하고 있는 산악기상관측소의 공간분포 특성과 연도별 공간변화를 분석하였다. 공간분포특성 분석을 위해 2012년부터 2016년까지 203개의 산악기상관측망을 대상으로 유클리디안 거리 분석, 최근 린지수 분석, 커널밀도 분석 방법으로 공간분석을 수행하였다. 평균거리 분석 결과, 2012년(3개 기관)은 29.0km, 2012년(4개 기관) 26.6km, 2013년 21.9km, 2014년 16.9km, 2015년 14.3km, 2016년은 12.6km로 2012년부터 2016년까지 16.4km가 감소하는 효과를 보였다. 최근린지수는 0.666632~0.811237였으며, 군집화 범위인 Z-score 검정 결과는 -4.372239~-5.145115, 통계적으로는 P-value(P<0.01)로 매우 유의하면서 산악기상관측망이 군집화 형태로 분포하는 것으로 나타났다. 커널밀도 분석 결과, 2012년은 129,719ha/1개소, 2013년 90,917ha/1개소, 2014년 71,342ha/1개소, 2015년 58,875ha/1개소로, 2016년은 50,914ha/1개소로 2012년부터 2016년까지 169,399ha/1개소가 감소하면서 산악기상관측망 공간분포 밀도가 높아진 결과를 보였다. 따라서 백두대간 일부 지역과 경북 내륙, 경남북서부 지역을 대상으로 최적의 입지에 산악기상관측망을 확충하는 것이 필요하다고 사료된다.

영산강과 섬진강 유역의 하천 수질환경 평가 (Estimation of Water Quality Environment in Youngsan and Seumjin River Basins)

  • 양해근;최희철
    • 대한지리학회지
    • /
    • 제38권1호
    • /
    • pp.16-31
    • /
    • 2003
  • 본 연구에서는 영산강과 섬진강의 유역을 대강으로 하천수질 환경관리에 가장 중요한 인자로 간주되는 종합적 수질지표(WQI)와 비유달부하량에 대한 개념을 도입하여 유역별 수질환경을 파악하였으며. 하천수질 형성에 영향을 미치는 인위적인 요인을 규명하였다. 영산강 유역의 비유달부하량은 8.34∼97.25kg/day/$\textrm{km}^2$로 나타났으며. 고막원천과 광주천유역에서 각각 97.25kg/day/$\textrm{km}^2$. 86.06kg/day/$\textrm{km}^2$로 높게 나타났다. 섬진강 유역의 비유달부하량은 10.98∼19.51kg/day/$\textrm{km}^2$로서. 오염 기여도가 높은 유역이 없는 것으로 밝혀졌다. WQI는 영산강 유역에서 1.36∼3.45인 반면에 섬진강 유역에서는 0.5~1.47로 비교적 낮은 수질 오염도를 나타냈다. 유역의 종합적 환경관리를 위해서는 유역별 오염 발생량과 하천 자정능력을 고려한 하천의 오염물질 수용한계에 대한 분석이 전제되어야 하며, 본 연구에서 제시한 비유달부하량은 오염물질 수용한계에 대한 기초 자료로서 그 가치가 있다고 볼 수 있다.

한국토양유실량 및 토양유실위험 지역 분석 (Analysis of Korea Soil Loss and Hazard Zone)

  • 김주훈;김경탁;이효정
    • Spatial Information Research
    • /
    • 제17권3호
    • /
    • pp.261-268
    • /
    • 2009
  • 본 연구는 전국 토양유실분포도와 토양유실위험 등급도를 작성하는 것을 목적으로 하였다. 토양유실분포도는 RUSLE를 이용하였고, 강우-유출 침식성인자(R)는 기상청의 59개 기상관측소의 1977년부터 2006년까지 (30년간)의 강우량 자료를 이용하여 산정하였다. 빈도분석은 FARD를 이용하였고, 전국 R인자를 빈도별로 산정하였다. 전국 R인자 분석에서 낙동강 유역이 가장 작은 값을 한강유역이 큰 값을 갖는 것으로 분석되었다. 토양유실량 분석결과 토지피복별로 초지, 나지 밭의 크기 순서로 토양유실이 발생하고, 전체적으로 약17.2ton/ha 정도의 토양유실이 발생하는 것으로 분석되었다. 단위면적당 평균토양유실량은 나지와 초지에서 많은 토양유실이 발생하고 있다. 5년빈도 강우특성에서 전체 토양유실량은 15,000여 톤의 토양유실이 발생하는 것으로 나타났다. 토지피복별 면적비를 고려하면 논, 산림, 밭작물 재배지역에서 많은 토양유실이 발생하는 것으로 분석되었다. 토양유실 위험 등급도 작성은 토양유실위험 등급을 5개 등급으로 구분하여 수행하였다. 분석결과 토양유실위험 2등급인 보통지역이 전체 토양유실량 위험지역의 78.2%로 가장 많은 부분을 차지하고 있으며, 심각한 토양유실 위험지역은 분석지역 전체 중에서 약 1.1%인 $1,038km^2$정도인 것으로 분석되었다. 토지피복별로 심각한 토양유실 위험지역은 나지, 초지, 밭작물 재배지역의 순으로 각각 $93.5km^2$, $168.1km^2$, $327.4km^2$ 정도가 심각한 등급의 토양유실 위험지역으로 분석되었다.

  • PDF

클라우드 경로탐색을 이용한 미래 교통정보 예측 방법 (A Study on Predictive Traffic Information Using Cloud Route Search)

  • 김준현;권기욱
    • 한국측량학회지
    • /
    • 제33권4호
    • /
    • pp.287-296
    • /
    • 2015
  • 최근 내비게이션에서는 실시간 교통정보와 과거의 교통정보를 가공하여 미래의 교통정보를 예측하는 패턴 교통정보를 같이 활용하여 빠른 길을 안내해주고 있다. 그러나 현재 사용되는 패턴 교통정보는 과거의 정보를 가공하여 교통정보를 예측하기 때문에 특별한 상황(유고, 날씨 등)에서는 예측이 정확하지 않는 문제점을 가지고 있다. 그래서 본 연구에서는 빠른 길을 찾기 위해 실시간으로 운전자들이 요청하는 경로탐색 데이터를 분석하여 가까운 미래 운전자들이 위치할 도로의 교통 혼잡도를 미리 파악하여 패턴 교통정보 보다 정확한 예측 교통정보를 제시하였다. 연구결과 첫째, 연구지역의 정체경로인 양재에서 마포간 차량속도 비교에서는 기존 상습정체 도로의 속도가중치 정확도가 3km/h에서 18km/h의 오차율이 발생하였지만, 본 연구의 Real 예측 교통 정보를 적용한 결과는 1km/h에서 5km/h의 오차율이 발생하였다. 둘째, 경로 품질에서 기존의 경로보다 최대 약 9분, 평균 약 3분 일찍 목적지에 도착하여 예측 교통정보 결과의 신뢰성을 입증할 수 있었다. 셋째, 기존의 경로탐색 결과 보다 혼잡도를 미리 예측하여 혼잡이 발생할 도로에 대해 회피되는 경로탐색 결과를 도출할 수 있었다. 따라서 본 연구결과의 경로탐색 비교를 통해 교통량에 대한 예측정보를 획득할 수 있었으며 이를 활용하여 실시간 빠른 길 탐색이 가능하고, 향후 교통 흐름을 분산 시키는데도 도움이 될 것으로 판단된다.

전방위 감시와 영상추적이 가능한 화재감시시스템에 관한 연구 (The Study on the Fire Monitoring Dystem for Full-scale Surveillance and Video Tracking)

  • 백동현
    • 한국화재소방학회논문지
    • /
    • 제32권6호
    • /
    • pp.40-45
    • /
    • 2018
  • 전방위 감시카메라에는 어안렌즈를 이용하여 광대역감시가 가능하도록 물체감지알고리즘으로 물체를 단위별 레벨링한 다음 전방위 감시카메라와 추적(PTZ)카메라로 구성된 시스템으로 연동하여 현장실험한 것이다. 전방위 감시카메라가 움직이는 물체를 정확히 감지하며 사각표시를 하였고 추적카메라와 유기적으로 연동하며 확대 추적하였다. 감지카메라와 화염감지 및 온도에 대한 현장실험에서는 오토스캔 중 화염이 감지되면 멈추며, 해당 화점부분을 화면의 중심부분으로 이동시켜 온도가 표출되었다. 또한 화염이격거리별 검지에 필요한 발열량의 인정기준인 1 km 2,340 kcal를 초과한 1.5 km에서도 가능하였다. 거리에 따른 화염감지성능시험에서는 거리 1 km일 때 폭 56 cm ${\times}$ 높이 90 cm를 초과한 1.5 km에서도 가능하여 산불화재에도 적응성이 충분하였다. 향후 석유 가스비축시설 및 저유소에 설치하면 자체는 물론 주위 화재예방 및 침입감시 등의 안전에 매우 유용할 것으로 기대된다.

동일 승용차량에 대한 RCAR 신.구 충돌시험을 통한 차체 충돌특성에 관한 연구 (A Study on Vehicle Crash Characteristics with RCAR Crash Test in Compliance with the New Test Condition)

  • 임종훈;박인송;허승진
    • 한국자동차공학회논문집
    • /
    • 제14권6호
    • /
    • pp.190-194
    • /
    • 2006
  • This research investigates vehicle structure acceleration and vehicle deformation with RCAR crash test. To investigate vehicle damage characteristics in an individual case, it is possible to RCAR low speed crash test. In this study, two tests were conducted to evaluate difference between RCAR new condition and RCAR old condition. A two large vehicles were subjected to a frontal crash test at a speed of 15km/h with an offset of 40% $10^{\circ}$ angle barrier and flat barrier. The results of the 15km/h with an offset of 40% $10^{\circ}$ angle barrier revealed high acceleration value on the vehicle structure and high repair cost compared to the RCAR 15km/h with an offset of 40% flat barrier. So in order to improve damage characteristics in low speed crash of vehicle structure and body component of the monocoque type passenger vehicles, the end of front side member and front back beam should be designed with optimum level and to supply the end of front side member as a partial condition approx 300mm.

Mutational Analysis of Two Conserved Active Site Tyrosine Residues in Matrilysin

  • Jaeho Cha
    • Journal of Life Science
    • /
    • 제9권2호
    • /
    • pp.44-48
    • /
    • 1999
  • The ionization of tyrosine residue is known to be involved in the stabilization of transition-state in catalysis of astacin based upon the astacin-transition state analog structure. Two tyrosine residues, Tyr-216 and Tyr-219, are conserved in all MMPs related with astacin family, We replaced Tyr-216 and Tyr-219 into phenylalanine, respectively and the zinc binding properties, kinetic parameters, and pH dependence of each mutant are determined in order to examine the role of tyrosine residue in matrilysin catalysis. Both mutants contain two zinc atoms per mol of enzyme, indicating that either tyrosime does not affect the zinc binding property of the enzyme. Y216F and Y219F mutants are highly active and the kcat/Km values are only decreased 1.1-1.5-fold compared to the wild-type enzyme. The decrease in the activity of the mutants is essentially due to the increase in Km value. The pH dependencies of the kcat/Km values for both mutants are similar to the corresponding dependencies obtained with the wild type enzyme. The pKa values at the alkaline side of both mutants are not changed. These kinetic and pH dependence results indicate that the ionization of active site tyrosine residue of matrilysin is not reflected in the kinetics of peptide hydrolysin as catalyzed by astacin.

차세대 고속철도 차량 모델의 1.2차 현가요소의 고장 발생 시 안전성 해석 (The Safety Analysis under failure of the 1st and 2ne Suspension Elements of the Next Generation High-speed Train model)

  • 김지영;박태원;윤지원;조재익
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2010년도 춘계학술대회 논문집
    • /
    • pp.984-988
    • /
    • 2010
  • In Korea, the next generation high-speed train, whose target is maximum speed of 400km/h and operating speed of 370km/h, has been developed since 2007. In this paper, the safety of the next generation high-speed train is compared UIC 518OR under the malfunctioning situation of the suspension system. The bogie of the next generation high-speed train has two suspensions. Two different vehicle models of the next generation high-speed train are created by using VAMPIRE and ADAMS/Rail, which are specialized to design railway vehicle. And Those models are showed same dynamic properties. First of all, the sensitivity analysis of ModelCenter is performed using model of VAMPIRE. One suspension element which has significant effects on the safety are selected by result of the sensitivity analysis. And then, the dynamic analysis when the suspension element is broken is performed using ADAMS/Rail. The 30km track between Pungsegyo and Biryong tunnel in Gyeongbu High-speed Line was used at the dynamic analysis. The estimated value is found by using the normal method of UIC 518OR. The estimated values on the normal/fault state and the limit values of UIC 518OR are compared. Finally, the safety of the next generation high-speed train is verified.

  • PDF

광 위상 공액기의 최적 파라미터 값 도출을 통한 0.96 Tbps WDM 신호의 BER 개선 (BER Improvements of 0.96 Tbps WDM Signals through Optimal Parameter Values of Optical Phase Conjugator)

  • 이영교
    • 디지털산업정보학회논문지
    • /
    • 제11권1호
    • /
    • pp.79-88
    • /
    • 2015
  • In this paper, it is investigated that the limitation due to the asymmetry of optical power and chromatic dispersion with respect to optical phase conjugator (OPC) for compensating optical signal distortion in WDM system is overcomed by using OPC position offset and optimal dispersion coefficients of fiber sections, which depend on OPC position offset. It is confirmed that overall WDM channels are efficiently compensated by applying the optimal parameter values obtained from the proposed method into 24 channels ${\times}40$ Gbps WDM system with non zero - dispersion shifted fiber (NZ-DSF) of 1, 000 km, such as power penalties of inter-channel are reduce to almost 3.5 dB from the infinite value. It is also confirmed that the flexible design of WDM system with OPC is possible by using the optimal parameters, in which OPC is placed at ${\pm}15km$ from 500 km for efficiently compensating overall channels. Thus, the methods proposed in this research will be expected to alternate with the method of making a symmetrical distribution of power and local dispersion in real optical link which generates a serious problem if it was not made but it is the condition in the case of applying the OPC into multi-channels WDM system.