• Archives of Plastic Surgery
• /
• v.38 no.5
• /
• pp.567-575
• /
• 2011

Purpose: Acellular human dermis is very useful implant for use in plastic and reconstructive surgery. However, the volume of acellular human dermis graft is known to decrease for a long time. Basic fibroblast growth factor (bFGF) is a polypeptide that enhances the collagen synthesis and angiogenesis. In the current study we examined whether bFGF could improve the survival of acellular human dermis ($SureDerm^{(R)}$) by increasing angiogenesis of the graft. Methods: Forty rats were divided into two groups (control and bFGF). A 2-mm thick piece of $SureDerm^{(R)}$ was cut into smaller pieces that were $15{\times}5$ mm in size. Two subcutaneous pockets were made on the back of each rat. Grafts sprayed with bFGF were implanted in the bFGF group and injected with bFGF after transplantation every 3 days for 2 weeks. In the control group, the grafts were treated with phosphate-buffered saline (PBS) instead of bFGF. Four days, and 1, 4, and 12 weeks after the implantation, the grafts were harvested and gross and histologic examinations were performed. Inflammation grade, graft thickness, neocollagen density, and neocapillary count were measured. Results: The bFGF group displayed more rapid accumulation of inflammatory cells with a higher density of neocapillaries, and increased active collagen synthesis. After 12 weeks, the thickness of the grafts in the control and bFGF groups was $75.15{\pm}4.80%$ and $81.79{\pm}5.72%$, respectively, in comparison to the thickness before transplantation. There was a statistically significant difference between both groups ($p$ <0.05). Conclusion: bFGF was effective in reducing the absorption of acellular human dermal grafts by increasing angiogenesis and accelerating engraftment. In conclusion, bFGF may be a good tool for use in acellular human dermal graft transplantation for reconstructive surgery involving soft-tissue defects.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.77
• /
• pp.113-144
• /
• 2018

This study explores how to prevent the fraudulent export financing and its subsequent export insurance fraud in relation to O/A negotiation. Under the traditional letter of credit(L/C) transactions, the banks, as a negotiation bank, can extend trade financing to the exporters through negotiation of draft and/or shipping documents. Under the O/A transaction scheme, however, bank cannot ascertain existence of trade performance and it is much riskier to extend an advance financing to the exporters before the buyer sends confirmation of debt. In O/A negotiation. some exporters tried to fraud banks by falsifying the shipping documents and the size and gravity of this fraudulent export financing were huge. Therefore, this study examines the banking process in O/A-based trade financing, documents examination process, the negotiation of instruments, treatment of trade financing in export credit guarantee, most importantly, explores what could be the criteria for appropriate treatment of account receivable to insure the safe transfer of account receivable. To maximize the benefit for optimum trade financing, the Bank of Korea established several Trade Finance Rules (refers to "BOK Rules") requiring that commercial banks should maintain optimal credit limits(so called, 'the principle of optimal loan') to extend the trade finance. The K-sure post-shipment credit guarantee programs and short-term export insurance program(EFF)can also facilitate 'the principle of optimal loan' principle.

• Restorative Dentistry and Endodontics
• /
• v.32 no.6
• /
• pp.550-558
• /
• 2007

The purpose of this study was to evaluate the insertion depth of several brands of master gutta percha cones after shaping by various Ni-Ti rotary files in simulated canals. Fifty resin simulated J-shape canals were instrumented with ProFile, ProTaper and HEROShaper. Simulated canals were prepared with ProFile .04 taper #25(n=10), .06 taper #25(n=10), ProTaper F2(n=10), HEROShaper .04 taper #25(n=10) and .06 taper #25(n=10). Size #25 gutta percha cones with a .04 & .06 taper from three different brands were used: DiaDent; META; Sure-endo. The gutta percha cones were selected and inserted into the prepared simulated canals. The distance from the apex of the prepared canal to the gutta percha cone tip was measured by image analysis program. Within limited data of this study, the results were as follows 1. When the simulated root canals were prepared with HEROShaper, gutta-percha cones were closely adapted to the root canal. 2. All brands of gutta percha cones fail to go to the prepared length in canal which was instrumented with ProFile, the cones extend beyond the prepared length in canal which was prepared with ProTaper. 3. In canal which was instrumented with HEROShaper .04 taper #25, Sure-endo .04 taper master gutta percha cone was well fitted(p < 0.05). 4. In canal which was instrumented with HEROShaper .06 taper #25, META .06 taper master gutta percha cone was well fitted(p < 0.05). As a result, we concluded that the insertion depth of all brands of master gutta percha cone do not match the rotary instrument, even though it was prepared by crown-down technique, as recommended by the manufacturer. Therefore, the master cone should be carefully selected to match the depth of the prepared canal for adequate obturation.

• East Asian mathematical journal
• /
• v.34 no.3
• /
• pp.249-263
• /
• 2018

We aim to establish certain Gronwall type inequalities associated with Riemann-Liouville k- and Hadamard k-fractional derivatives. The results presented here are sure to be new and potentially useful, in particular, in analyzing dependence solutions of certain k-fractional differential equations of arbitrary real order with initial conditions. Some interesting special cases of our main results are also considered.

• Proceedings of the KIEE Conference
• /
• 2002.07b
• /
• pp.1187-1189
• /
• 2002

In the case of an existing high frequency inverter is became forced extinction by quick load change, due to be connected with series inductor on switch, it is destroyed or is generated conduction loss by resistance component in reactor. And, In the operation of high current with a soft switching, conduction loss can not neglect. In this paper, for the high current power source, we make sure of soft swtching operation and reducing surge when the forced extinction by using a connected switch with series inductor. Also, we poropos a topology of the half bridge type high frequency inverter that can be realized high amplitude operation of the load current. And, analyze the circuit to decide an opmtial circuit parameter.

• Proceedings of the KIEE Conference
• /
• 1997.07c
• /
• pp.822-824
• /
• 1997

The routing and surveying a transmission line should be done in advance of its construction. It is getting more difficult to construct transmission line day by day, due to the rapid increase of people's demand resulting from the recent change of social environment and people's consciousness. In order to solve these complicated conditions actively and rationally, it is necessary to be more scientific, objective and computerizable for the routing and surveying of a transmission line. New technologies on routing and surveying a 765kV transmission line are remote sensing, Global Positioning System and Optimal PowerLine system. Thanks to these technologies, there will be a contribution to making sure of the best quality and developing technolo91r of transmission line.

• Transactions on Electrical and Electronic Materials
• /
• v.15 no.6
• /
• pp.348-352
• /
• 2014

In light of the sure protection function, the most important factors of a varistor are the clamping voltage ratio and degradation characteristics. The degradation characteristics of Pr/Co/Cr/Er co-doped zinc oxide varistors were investigated by impulse currents (0.4~2.1 kA) stress for the specified content of $Er_2O_3$ (0.5 and 2.0 mol%). The varistor doped with 2.0 mol% $Er_2O_3$ exhibited the best clamp characteristics, with the clamp voltage ratio (K) in the range of K = 1.63~1.88 at the impulse currents of 5-50 A. However, the varistor doped with 0.5 mol% exhibited excellent electrical stability, with variation rates for the breakdown field, for the nonlinear coefficient, and for the leakage current density of -6.9%, -12.6%, and -14.3%, respectively, after application of an impulse current of 2.1 kA. In contrast, the varistor doped with 2.0 mol% was destroyed after application of an impulse current of 1.2 kA.

• Proceedings of the KIEE Conference
• /
• 2007.10c
• /
• pp.71-73
• /
• 2007

This paper deals with dynamic characteristics of LSRM. Position choose mover of LSRM and inductance. When approved current in each phase by decided position, we made sure current and voltage according to turn-on, turn-off. In dynamic simulation of LSRM, through an experiment, we decided turn-on position of inductance profile. Also, we presented dynamic characteristic analysis model which is consisted at motor and sensor signal part, etc., and substitute circuit constant that get using magnetic equivalent circuit method, we confirmed current and voltage waveform.

• The Korean Journal of Pharmacology
• /
• v.3 no.1
• /
• pp.27-29
• /
• 1967

Many investigators reported the mineral corticoid hormon-like action of Glycyrrhizin. The other investigators suggested concerning the glucocorticoid hormon-like action. Authors had been observed the glycogen content of the liver to make sure the relationship between glucocorticoid like action of Glycyrrhizin and glucose metabolism in the liver. There was significant increase in the liver glycogen content in rat fed Glycyrrhizin for two weeks, however it was confirmed that Glucuronic acid combined with Glucuronic was unable to make any influence to glycogen content. The relation concerning the effect of Glycyrrhizin on liver glycogen and its mechanism of action might be needed followup study.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1153-1155
• /
• 2005

This paper deals with dynamic characteristics of LSRM according to drive condition. First, in experiment of LSRM, position of LSRM detected approximation sensor. Position choose mover of LSRM and inductance. When approved current in each phase by decided position, we made sure current and voltage according to turn-on, turn-off. Second, in dynamic characteristic of LSRM, through an experiment, we decided turn-on position of inductance profile. Also, we presented dynamic characteristic analysis model which is consisted at motor and sensor signal part, etc., and substitute circuit constant that get using magnetic equivalent circuit method, we confirmed current and voltage waveform.