• Structural Engineering and Mechanics
• /
• 제63권4호
• /
• pp.457-469
• /
• 2017

This manuscript deals with a novel approach aimed at identifying multiple damaged sites in structural components through finite frequency changes. Natural frequencies, meant as a privileged set of modal data, are adopted along with a numerical model of the system. The adoption of finite changes efficiently allows challenging characteristic problems encountered in damage detection techniques such as unexpected comparison of possible shifted modes and the significance of modal data changes very often affected by experimental/environmental noise. The new procedure extends MDLAC and exploits parallel computing on modern multicore processors. Smart filters, aimed at reducing the potential damaged sites, are implemented in order to reduce the computational effort. Several use cases are presented in order to illustrate the potentiality of the new damage detection procedure.

• Transactions of Materials Processing
• /
• 제14권7호
• /
• pp.619-623
• /
• 2005

Lubrication and cooling characteristics are the most important factors of elevated temperature forging lubricants. Usually adopted lubricants in warm forging processes are graphite, synthetic and emulsion lubricants. Most widely and effectively applied lubricants are graphite lubricants, but these have a lot of problems like tool corrosion and dusty environment. In this research, boronite lubricant is considered, because it is able to substitute for graphite. Hot ring compression test, cooling test and mass production test are performed to check the validity of new lubrication pigment.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• 제24권5호
• /
• pp.1271-1280
• /
• 2000

A sensor placement technique to identify structural parameter was developed. Experimental results must be acquired to identify unknown dynamic characteristics of a targeting structure for the comparison between analytical model and real structure. If the experimental environment was not equipped itself properly, it can be happened that some valuable information are distorted or ill-condition can be occurred. In this work the index to determine exciting points was derived from the criterion of maximizing parameter sensitivity matrix and that to choose measurement points was from that of preserving the invariant of sensitivity matrix. This idea was applied to a compressor hull structure to verify its performance. The result shows that the selection of measurement and excitation points using suggested criteria improve the ill-conditioning problem of inverse type problems such , as model updating.

• Proceedings of the IEEK Conference
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.1075-1078
• /
• 1999

In this study, a new algorithm for canceling MRI artifacts through the translational motion of image plane is presented. Bloating is often makes problems in a clinical diagnosis. Assuming that the head moves up and down due to breathing, rigid translational motions in only y(phase encoding axis) direction is treated. First, we notice that the x directional motion corresponds to a shift of the x directional spectrum of the MRI signal, and the non zero area of the spectrum just corresponds to x axis projected area of the density function. So the motion is estimated by tracing the edges of the spectrum, and the x directional motion is canceled by shifting the spectrum in inverse direction. Next, the y directional motion is canceled using a new constraint, with which the motion component and the true image component can be separated. Finally, the effectiveness of this algorithm is shown by using a phantom with simulated motions.

• Proceedings of the IEEK Conference
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.1085-1088
• /
• 1999

This paper presents a method for soccer scene analysis and coordinate transformation from scene to ground model using a priori knowledge. First, the ground and spectator regions are separated, and various objects are extracted from the separated ground region. Second, an affine model is used for mapping the object positions on the soccer image into the position on the ground model. Problems regarding holes arising from mapping processing are solved using inverse mapping instead of a usual interpolation method. Experiments are performed on a PC using about 100 RGB images acquired at 240＊640 resolution and 3∼5 frames per second.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 한국지진공학회 2005년도 학술발표회 논문집
• /
• pp.529-535
• /
• 2005

This paper presents a system identification (SI) scheme in time domain using measured acceleration data. The error function is defined as the time integral of the least squared errors between the measured acceleration and the calculated acceleration by a mathematical model. Damping parameters as well as stiffness properties of a structure are considered as system parameters. The structural damping is modeled by the Rayleigh damping. A new regularization function defined by the L1-norm of the first derivative of system parameters with respect to time is proposed to alleviate the ill-posed characteristics of inverse problems and to accommodate discontinuities of system parameters in time. The time window concept is proposed to trace variation of system parameters in time. Numerical simulation study is performed through a two-span continuous truss subject to ground motion.

• International Journal of Control, Automation, and Systems
• /
• 제5권2호
• /
• pp.218-222
• /
• 2007

This paper presents a new Perfect Tracking Control (PTC) scheme for linear systems with state constraint. The proposed controller increases the number of the steps on-line for perfect tracking to satisfy the given ellipsoid-type state constraint. The unavoidable step delay that we impose is minimized by solving LMI feasibility problems and the possible feedback information loss is avoided. The proposed schemes are easy to develop, theoretically simple and clear, and include the conventional PTC as its special case.

• IEIE Transactions on Smart Processing and Computing
• /
• 제5권5호
• /
• pp.319-322
• /
• 2016

We propose a parametric blind deconvolution method for bi-level images with unknown intensity levels that estimates unknown parameters for point spread functions and images by minimizing a penalized nonlinear least squares objective function based on normalized correlation coefficients and two regularization functions. Unlike conventional methods, the proposed method does not require knowledge about true intensity values. Moreover, the objective function of the proposed method can be effectively minimized, since it has the special structure of nonlinear least squares. We demonstrate the effectiveness of the proposed method through simulations and experiments.

• Proceedings of the KSME Conference
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.415-419
• /
• 2000

Multi-degree-of-freedom (MDOF) displacement measurement Is needed In many application fields: precision machine control, precision assembly, vibration analysis, and so on. This paper presents a new MDOF displacement measurement method using a laser diode (LD), two position-sensitive detectors (PSDs), and a conventional diffraction grating. It utilizes typical features of a diffraction grating to obtain the information of MDOF displacement. MDOF displacement is calculated from the independent coordinate values of the diffracted ray spots on the PSDs. Forward and inverse kinematic problems were solved to compute the MDOF displacement of a rigid body. Experimental results show maximum absolute errors of less than ${\pm}10$ micrometers in translation and ${\pm}30$ arcsecs in rotation.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• 제20권9호
• /
• pp.2800-2811
• /
• 1996

The deformation of a structure shall be called homologous, if a given geometrical relation holds, for a given number of structural points, before, during, and after the deformation. Some researchers have utilized the idea on structural design with finite element method. The approaches use the decomposition of the FEM equation or equality of eqality equations to obtain homologous deformation. However, weight reduction and response constraints such as stress, displacement or natural frequency cannot be considered by those theories. An optimization method solving the above problems is suggested to gain homologous deformation. Homology constraints can be considered under multiple loadindg conditions as well as a single loading condition. Homology index is defined for the multiple loading conditions Examples are solved to present the performances of the method.