• Title/Summary/Keyword: Integrated M&S

Search Result 865, Processing Time 0.031 seconds

Development of Torpedo Target Detection Section Interface Simulation System based on DEVS Integrated Development Environment (DEVS 통합개발환경 기반 모의 어뢰 표적탐지부 연동장비 개발)

  • Lee, Min Kyu;Hwang, Kun Chul;Lee, Dong Hoon;Nah, Young In;Kim, Woo Shik
    • Journal of the Korea Society for Simulation
    • /
    • v.24 no.1
    • /
    • pp.25-34
    • /
    • 2015
  • It is necessary for us to undergo trial and error for eliciting the rational requirement of the acquisition of weapon systems, but the M&S is general approach due to costs and risk of the development. In addition to the acquisition of weapon systems, M&S is extensively employed in the analysis and the training of developed weapon systems. The ADD (Agency for Defense Development) has developed DEVS integrated development environment (QUEST) that provides M&S general ground technique composed of simulation model implementation services, simulation result analysis services, and simulation interface services. This paper describes the interface architecture and the implementation of torpedo target detection section interface simulation system using QUEST. The torpedo target detection section interface simulation system is composed of torpedo target detection section which calculates a result of target detection and the QUEST scenario generator which provides simulation scenario for performance test of the torpedo target detection section. The interface architecture of torpedo target detection section interface simulation system is designed to verify the interface and performance of the torpedo target detection section by linking with the QUEST scenario generator.

COMS DATS Implementation and Test (통신해양기상위성 데이터 송수신 서브시스템의 구축 및 시험)

  • Park, Durk-Jong;Kim, Su-Jin;Ahn, Sang-Il
    • Journal of Astronomy and Space Sciences
    • /
    • v.25 no.4
    • /
    • pp.459-470
    • /
    • 2008
  • DATS which is one of three subsystems of IDACS is responsible to receive Sensor Data, LRIT and HRIT in L-Band and transmit LRIT and HRIT in S-Band from/to COMS satellite. This paper shows detailed test procedures used to verify the performance and functionality of DATS after its implementation was completely finished. As a part of efforts to verify key DATS performance, G/T and EIRP were measured by using solar flux density as radio source. Regarding the verification of DATS functionality, RF loop-back test was conducted to validate if there is no BER degradation excepting MODEM/BB implementation loss occurred in the integrated DATS. Integrated with 13m antenna, DATS successfully restored image from received MTSAT-1R broadcasting data, LRIT and HRIT, of which frequencies are all L-Band. S-Band transmission was also verified through test antenna placed away from 13m antenna by measuring real LRIT and HRIT spectrum in S-Band. From those test results, DATS is determined to be fully ready to communicate with COMS in L-Band and S-Band.

Review on the Quality Attributes of an Integrated Simulation Software for Weapon Systems (무기체계 통합시뮬레이션 소프트웨어의 품질 속성 검토)

  • Oh, Hyun-Shik;Kim, Dohyung;Lee, Sunju
    • Journal of the Korea Institute of Military Science and Technology
    • /
    • v.24 no.4
    • /
    • pp.408-417
    • /
    • 2021
  • This paper describes the quality attributes of an integrated simulation software for weapon systems named Advanced distributed simulation environment(AddSIM). AddSIM is developed as a key enabler for Defense Modeling & Simulation(M&S) systems which simulate battlefields and used for battle experiments, analyses, military exercises, training, etc. AddSIM shall provide a standard simulation framework of the next Defense M&S systems. Therefore AddSIM shall satisfy not only functional but also quality requirements such as availability, modifiability, performance, testability, usability, and others. AddSIM consists of operating softwares of hierarchical components including graphical user interface, simulation engines, and support services(natural environment model, math utility, etc.), and separated weapon system models executable on the operating softwares. The relation between software architectures and their quality attributes are summarized from previous works. And the AddSIM architecture and its achievements in the aspect of quality attributes are reviewed.

Flood Risk Management for Weirs: Integrated Application of Artificial Intelligence and RESCON Modelling for Maintaining Reservoir Safety

  • Idrees, Muhammad Bilal;Kim, Dongwook;Lee, Jin-Young;Kim, Tae-Woong
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2020.06a
    • /
    • pp.167-167
    • /
    • 2020
  • Annual sediment deposition in reservoirs behind weirs poses flood risk, while its accurate prediction remains a challenge. Sediment management by hydraulic flushing is an effective method to maintain reservoir storage. In this study, an integrated approach to predict sediment inflow and sediment flushing simulation in reservoirs is presented. The annual sediment inflow prediction was carried out with Artificial Neural Networks (ANN) modelling. RESCON model was applied for quantification of sediment flushing feasibility criteria. The integrated approach was applied on Sangju Weir and also on estuary of Nakdong River (NREB). The mean annual sediment inflow predicted at Sangju Weir and NREB was 400,000 ㎥ and 170,000 ㎥, respectively. The sediment characteristics gathered were used to setup RESCON model and sediment balance ratio (SBR) and long term capacity ratio (LTCR) were used as flushing efficiency indicators. For Sangju Weir, the flushing discharge, Qf = 140 ㎥/s with a drawdown of 5 m, and flushing duration, Tf = 10 days was necessary for efficient flushing. At NREB site, the parameters for efficient flushing were Qf = 80 ㎥/s, Tf = 5 days, N = 1, Elf = 2.24 m. The hydraulic flushing was concluded feasible for sediment management at both Sangju Weir and NREB.

  • PDF

Analysis of Information Distribution Capability of the Army TIGER Corps Multilayer Integrated Communication Network (Army TIGER 군단 다계층 통합 전술통신망의 정보유통량 분석)

  • Junseob Kim;Sangjun Park;Yiju You;Yongchul Kim
    • Convergence Security Journal
    • /
    • v.24 no.2
    • /
    • pp.175-180
    • /
    • 2024
  • Future warfare is evolving with advanced science and technology, introducing a variety of unmanned and manned combat systems. These systems generate and exchange massive amounts of information, challenging current tactical communication systems as a foundation for future communication infrastructure. To analyze the information distribution capability of the Army TIGER corps, this paper examines four scenarios: standalone ground network operation, integrated network operation, load distribution, and error recovery. Utilizing M&S results, we highlight the potential of a multilayer integrated command and control network, incorporating ground, air, and space networks, to enhance the reliability and stability of the overall communication network.

Simple Preparation of Diaphorase/Polysiloxane Viologen Polymer Modified Electrode for Sensing NAD and NADH

  • Song, Ji-Eun;Hong, Zhenyu;Nagarale, Rajaram Krishna;Shin, Woon-Sup
    • Journal of Electrochemical Science and Technology
    • /
    • v.2 no.3
    • /
    • pp.163-167
    • /
    • 2011
  • Nicotinamide adenine dinucleotide, $NAD^+$, and its reduced form, NADH, play important roles as coenzymes in many enzymatic reactions. Electrochemical methods for $NAD^+$ or NADH detection or generation are drawn attention because it can provide the simple and low cost platform with fairly good sensitivity. In this study, the polysiloxane viologen polymer/diaphorase/hydrophilic polyurethane (PSV/DI/HPU) modified electrodes were simply prepared and demonstrated for bio-electrocatalytic $NAD^+$ sensors. The electrodes were co-immobilized with diaphorase and polysiloxane viologen polymer as an electron mediator followed by the overcoating with HPU membrane. The mixture of the enzyme and the electron mediator was well stabilized within HPU membrane and exhibited good reversibility and stability. The sensitivity was 0.2 $nA{\cdot}{\mu}M^{-1}$ and the detection limit was 28 ${\mu}M$ with a response time of 50 s ($t_{90%}$). The capability for NADH sensor was also observed on the PSV/DI/HPU electrode.

Construction of an Integrated Pepper Map Using RFLP, SSR, CAPS, AFLP, WRKY, rRAMP, and BAC End Sequences

  • Lee, Heung-Ryul;Bae, Ik-Hyun;Park, Soung-Woo;Kim, Hyoun-Joung;Min, Woong-Ki;Han, Jung-Heon;Kim, Ki-Taek;Kim, Byung-Dong
    • Molecules and Cells
    • /
    • v.27 no.1
    • /
    • pp.21-37
    • /
    • 2009
  • Map-based cloning to find genes of interest, marker-assisted selection (MAS), and marker-assisted breeding (MAB) all require good genetic maps with high reproducible markers. For map construction as well as chromosome assignment, development of single copy PCR-based markers and map integration process are necessary. In this study, the 132 markers (57 STS from BAC-end sequences, 13 STS from RFLP, and 62 SSR) were newly developed as single copy type PCR-based markers. They were used together with 1830 markers previously developed in our lab to construct an integrated map with the Joinmap 3.0 program. This integrated map contained 169 SSR, 354 RFLP, 23 STS from BAC-end sequences, 6 STS from RFLP, 152 AFLP, 51 WRKY, and 99 rRAMP markers on 12 chromosomes. The integrated map contained four genetic maps of two interspecific (Capsicum annuum 'TF68' and C. chinense 'Habanero') and two intraspecific (C. annuum 'CM334' and C. annuum 'Chilsungcho') populations of peppers. This constructed integrated map consisted of 805 markers (map distance of 1858 cM) in interspecific populations and 745 markers (map distance of 1892 cM) in intraspecific populations. The used pepper STS were first developed from end sequences of BAC clones from Capsicum annuum 'CM334'. This integrated map will provide useful information for construction of future pepper genetic maps and for assignment of linkage groups to pepper chromosomes.

A fabrication and characterization of asymmetric 0.1 ${\mu}{\textrm}{m}$ $\Gamma$-gate PHEMT device using electron beam lithography (전자선 묘화 장치를 이용한 비대칭적인 0.1 ${\mu}{\textrm}{m}$ $\Gamma$-게이트 PHEMT 공정 및 특성에 관한 연구)

  • 임병옥;김성찬;김혜성;신동훈;이진구
    • Proceedings of the IEEK Conference
    • /
    • 2001.06b
    • /
    • pp.189-192
    • /
    • 2001
  • We have studied fabrication processes that form asymmetric $\Gamma$-gate with a 0.1${\mu}{\textrm}{m}$ gate length in MMIC's(Monolithic Microwave Integrated Circuits). Asymmetric $\Gamma$-gate was fabricated using mixture of PMMA and MCB. Thus pseudomorphic high electron mobility transistor (PHEMT's) with 0.1${\mu}{\textrm}{m}$ gate length was fabricated via several steps such as mesa isolation, metalization, recess, passivation. PHEMT's has the -1.75 V of pinch-off voltage (Vp), 63 mA of drain saturation current(Idss and 363.6 mS/mm of maximum transconductance (Gm) in DC characteristics and current gain cut-off frequency of 106 GHz and maximum frequency of oscillation of 160 GHz in RF characteristics.

  • PDF

The Study on the management innovation by TIM(Total Integrated Mangement) (TIM(Total Integrated Management)을 통한 경영혁신기법에 관한 연구)

  • Choi, Ericsueng;Kim, Chang-Eun
    • Journal of the Korea Safety Management & Science
    • /
    • v.9 no.1
    • /
    • pp.187-195
    • /
    • 2007
  • There are many Korea companies who are introducing many kinds of management renovation methods in order to attain more management achievement. So many personnels under CEO are trying to change themselves to fit those kinds of management renovation methods. Now, all kinds of books for supervisors have published, but it is not easy for those supervisors to understand those books as those books do not fit for their own companies situation. The best management methods in the best companies in U.S.A. actually can not be well introduced in Korea. So, the management methods should be changed with the environment's changing. Therefore, the company management is the process to suit the continue changing environment.

The Study on the management innovation by TIM(Total Integrated Management) (TIM(Total Integrated Management)을 통한 경영혁신기법에 관한 연구)

  • Choi, Ericsueng;Hong, Min-Ki;Kim, Chang-Eun
    • Proceedings of the Safety Management and Science Conference
    • /
    • 2007.04a
    • /
    • pp.363-371
    • /
    • 2007
  • There are many Korea companies who are introducing many kinds of management renovation methods in order to attain more management achievement. So many personnels under CEO are frying to change themselves to fit those kinds of management renovation methods. Now, all kinds of books for supervisors have published, but it is not easy for those supervisors to understand those books as those books do not fit for their own companies situation. The best management methods in the best companies in U.S.A. actually can not be well introduced in Korea. So, the management methods should be changed with the environment's changing. Therefore, the company management is the process to suit the continue changing environment.

  • PDF