• Communications for Statistical Applications and Methods
• /
• 제17권3호
• /
• pp.357-365
• /
• 2010

통합공정관리란 잡음이 내재하는 공정에 대하여 수정조치를 취하고, 수정활동 중 공정에 이상원인이 발생하면 이를 관리도를 통해 탐지하여 제거하는 절차를 일컫는다. 이 논문에서는 공정의 잡음모형으로 IMA(1,1) 모형을 가정하고 최소평균제곱오차 수정절차를 수행할 때 일반화가능도비 관리도를 사용하여 이상원인을 탐지하는 절차를 고려하고 있으며, 이러한 상황에서 일반화가능도비 관리도의 관리한계를 설정하는 설계 방법을 제안하였다. 이상원인의 효과로는 공정 평균의 지속적 변화와 지속적 흐름 그리고 공정 분산의 지속적 변화를 고려하였다.

• 한국해양공학회지
• /
• 제23권1호
• /
• pp.152-157
• /
• 2009

In designing and manufacturing a submarine, an expensive real mock up is usually built as a reference because of the spatial constraints of a submarine. This paper presents an integrated and automated design process for a submarine that uses a digital mock up. Various equipment libraries are built for feature based design. Using the developed digital mock up, this paper shows various ways to verify the design, including a space analysis to check for any interference between pieces of equipment and the hull and an ergonomic analysis using lifelike dummies to examine the work space and operability. As a part of the integrated design system, a design automation system was also developed to generate surface point data for the outer hull, pressure hull, casing, and sail. The whole process was applied to the design of a submarine for verification.

• 시스템엔지니어링학술지
• /
• 제8권1호
• /
• pp.63-75
• /
• 2012

For the definition of development project, this paper proposes an integrated design model for the project 3P's(Products, Process, and People) architecture solutions balancing the originating requirements as well as the design targets of product, process, and IPDT. The model is suggested to develop the integrated design method with trade-off analysis and alternatives evaluation of products, processes, and IPDT using QFD.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1999년도 가을 학술발표회 논문집
• /
• pp.444-451
• /
• 1999

The purpose of this study is to Propose data models for central database in integrated system for structural design building. In order to efficiently express data related to structure, I analyzed the structure design process and classified data considering design step. 1 used an object-oriented modeling methodology for logical data model and relational modeling for physical data model. Based on this model, we will develop an integration system with several applications for structure design. Each application will communicate through the central database.

• 한국CDE학회논문집
• /
• 제13권6호
• /
• pp.412-420
• /
• 2008

In order to design the large complex structures like VLFS (Very Large Floating Structures), it is essential the cooperation between the experts in various fields; structural engineering expert, fluid mechanics expert, mooring system engineer, and so on. This paper describes the development of an integrated system to support the cooperative design between various experts and project manager. This integrated system is designed to be operated in Web environment and it contains the support of design DB and 3D graphical tool, negotiation tool for task allocation, and various engineering supporting tools for each design step. The user group of this system can be classified as Project Manager, Engineering Expert, DB Builder, and System Administrator. All of the engineering data is saved after and during the process of the design projects and all participants can be connected by Internet without the limit of time or space constraints.

• 한국CDE학회논문집
• /
• 제11권2호
• /
• pp.128-137
• /
• 2006

In this paper, a CAD/CAE integrated optimal design system is developed, in which design and analysis process is automated using CAD/CAE softwares for a complex model in which the modeling by parametric feature is not easy to apply. Unigraphics is used for CAD modeling, in which the process is automated by using UG/Knowledge Fusion for modeling itself and UG/Open API function for the other functions respectively. Structural analyses are also carried out automatically by ANSYS using the imported parasolid model. The developed system is applied for the PLS(Plasma Lighting System) consisting of more than 20 components, which is a next generation illumination system that is used to illuminate stadium or outdoor advertizing panel. The analyses include responses by static, wind and impact loads. As a result of analyses, tilt assembly, which is a link between upper and lower body, is found to be the most critical component bearing higher stresses. Experiment is conducted using MTS to validate the analysis result. Optimization is carried out using the software Visual DOC for the tilt assembly to minimize material volume while maintaining allowable stress level. As a result of optimization, the maximum stress is reduced by 57% from the existing design, though the material volume has increased by 21%.

• 한국전산구조공학회논문집
• /
• 제21권6호
• /
• pp.527-533
• /
• 2008

본 논문에서는 통합제품개발 관점에서 Computer-Aided Engineering(CAE) 활동을 지원하는 제품자료모델(Product Data Model)을 제안한다. 제안된 제품자료모델은 제품개발 프로세스를 관리하는 제품생애주기관리(Product Lifecycle Management: PLM) 시스템에 현재 독립되어 진행되고 있는 CAE 활동을 통합될 수 있도록 한다. 제안된 제품자료모델에 포함된 제품관점(Product View)은 설계와 제품구조를 공유하여 다양한 대안을 해석하고, 그 결과를 손쉽게 설계로 전달할 수 있는 독립적 CAE 활동을 보장한다. 제안된 모델을 검증하기 위하여 제품개발 프로세스와 통합된 CAE 활동을 지원하는 PLM 시제품을 개발하였다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2000년도 봄 학술발표회논문집
• /
• pp.397-404
• /
• 2000

The research of the computer-aided analysis and design of steel structures has continuously evolved. Despite the importance of connection in steel structures, the design process of connections is inefficient in present. The purpose of this study is to help engineer in connection design process. In this paper, prototype of automatic connection design module in integrated system for steel structures is proposed. The main methodology is based on bottom-up approach to simplify and formalize product model. Expert system is used to help engineer for selecting steel connection type. Object-oriented analysis and modeling will improve the expansion of knowledge-base. The design for connection was done according to the design specifications of connections of AISC

• 농촌계획
• /
• 제21권4호
• /
• pp.167-175
• /
• 2015

The aim of this study is to establish resident-participative primary design of integrated rural development project with master planner by setting principals of open competition and transparent decision-making about village-to-village or business-to-business unit enterprise in Onui area, Hong-seong Gun. For effective processing, software projects such as residents education and rural landscape planning are simultaneously conducted for enhancing project understanding and comprehensive development plan including related post project. Above all, competition teams for individual project were organized to establish the resident-participative primary design using survey tables of residents demand. In 6 months resident-participative processing of primary design, continuous education and visiting to advanced area are conducted in team unit. Strengthened ability of team unit can be used in management and maintenance after project development. To do this, residents with the same opinions gathered as one competition team and identified business plans such as village asset, business location, size, program, and method for land securing. Favorable decision-making process by residents who are audience in project presentation of competition team has conducted. After selecting competition teams, continuos consulting are operated for establishing operation and management for developed or remodeled facilities through repetitive education and visiting advanced area. In this process, unit project suggested by competition team are completed. Preliminary selection was conducted by experts who were entrusted by residents. After residents agreement of project main stream such as major facilities and location, final detailed cost of projects are work out. Suggested process in this study which choose the final project by residents would improve residents' voluntary participation in integrated rural development project through open competition in establishing primary design.

• 전자공학회논문지A
• /
• 제29A권3호
• /
• pp.41-46
• /
• 1992

In this paper we report how to design integrated-mirror etalons for surface-emitting lasers and photonic switching without time-consuming numerical calculation. It consists of the following two-step process (step 1) find the minimum reflectance to achieve the maximum allowable linewidth. (step 2) find the number of the quarter-wave layers in each mirror to realize the reflectance given by step 1. The condition for maximum transmission in an integrated- mirror etalon is also derived. Under this condition we can achieve the required linewidth with the minimum number of quarterwave layers.