• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 B
• /
• pp.1179-1181
• /
• 1996

In this paper, method for direct adaptive control of discrete nonlinear systems using neural network is presented. Also, the stability problems are investigated in sense of the Lyapunov stability conditions. Through extensive simulation, the SOON is shown to be effective for indirect adaptive control of nonlinear dynamic systems.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제3권1호
• /
• pp.78-86
• /
• 2003

Multivariable control system exist widely in many types of systems such as chemical processes, biomedical processes, and the main steam temperature control system of the thermal power plant. Up to the present time, Pill Controllers have been used to operate these systems. However, it is very difficult to achieve an optimal PID gain with no experience, because of the interaction between loops and gain of the Pill controller has to be manually tuned by trial and error. This paper suggests a tuning method of the Pill Controller for the multivariable power plant using an immune algorithm, through computer simulation. Tuning results by immune algorithms based neural network are compared with the results of genetic algorithm.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1271-1272
• /
• 2007

Experimental results regarding to the structural properties of carbon nanotubes (CNTs) and the field-emission characteristics of CNT-coated tungsten (W) tips are presented. CNTs are successfully grown on conical-type W-tips by inductively coupled plasma-chemical vapor deposition (ICP-CVD) with or without inserting a TiN-buffer layer prior to the formation of Ni catalysts. For all the CNTs grown, their nanostructures, morphologies, and crystalline structures are analyzed by FESEM, HRTEM, and Raman spectroscopy. Furthermore, the emission properties of CNT-based field-emitters are characterized to estimate the maximum current density and the threshold voltage. The results obtained in this study indicate that the emission current level of the CNT-emitter without using a TiN buffer is desirable for the application of micro-focused x-ray systems.

• 디지털산업정보학회논문지
• /
• 제19권3호
• /
• pp.25-38
• /
• 2023

Instrumentation and control systems measure and control various variables of nuclear facilities to operate nuclear power plants safely. A diverse protection system, a representative instrumentation and control system, generates a reactor trip and turbine trip signal by high pressure in a pressurizer and containment to satisfy the design requirements 10CFR50.62. Also, it generates an auxiliary feedwater actuation signal by low water levels in steam generators. Cybersecurity has become more critical as digital technology is gradually applied to solve problems such as performance degradation due to aging of analog equipment, increased maintenance costs, and product discontinuation. This paper analyzed possible cybersecurity threat scenarios in the diverse protection system using attack trees. Based on the analyzed cybersecurity threat scenario, we calculated the probability of attack occurrence and confirmed the cybersecurity risk in connection with the asset value.

• International Journal of Control, Automation, and Systems
• /
• 제6권6호
• /
• pp.960-967
• /
• 2008

This paper shows that design of a robustly stable repetitive control system is equivalent to that of a feedback control system for an uncertain linear time-invariant system satisfying the well-known robust performance condition. Once a feedback controller is designed to satisfy the robust performance condition, the feedback controller and the repetitive controller using the performance weighting function robustly stabilizes the repetitive control system. It is also shown that we can obtain a steady-state tracking error described in a simple form without time-delay element if the robust stability condition is satisfied for the repetitive control system. Moreover, using this result, a sufficient condition is provided, which ensures that the least upper bound of the steady-state tracking error generated by the repetitive control system is less than or equal to the least upper bound of the steady-state tracking error only by the feedback system.

• 제어로봇시스템학회논문지
• /
• 제17권8호
• /
• pp.833-842
• /
• 2011

The objectives of this research are development of guidance, navigation and control system for RUAV on virtual instrumentation and real flight test. For this research, the system is divided to DAQ (data acquisition) section, actuator section and controller section. And the hardware and software on each sections are realized on LabVIEW base. Waypoint guidance and control of auto flight are realized using PID gain tuning and waypoint vector tracking guidance algorism. For safe flight test, auto/manual switching module isolated from FCS (Flight Control System) is developed. By using the switch module, swift mode change was achieved during emergency flight case. Consequently, a meter level error of flight performance is achieved.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 D
• /
• pp.1970-1972
• /
• 2001

This paper is concerned with the $H_{\infty}$ controller design of linear systems subject to time-delay in the state and saturating controls. The controller is derived from the matrix inequalities whish are obtained by minimizing the $L_{2}$ gain from the disturbance to the measured output, and this can be done by LMI control toolbox. An example is presented to show the usefulness of our result.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 추계학술대회 논문집 학회본부
• /
• pp.39-41
• /
• 1996

While the z-transform method is a basic mathematical tool to relate the signals only at the sampling instants in analyzing and designing sampled-data control systems, the modified z-transform which is a variation of the z-transform is widely used to represent the details of continuous signals between the sampling instants. Regarding the modified z-transform method, some properties were established to relate the modified z-transform to the regular z-transform. This paper will show that these properties, in their current forms, cause some analytic problems, when they are applied to the signals with discontinuities at the sampling instants, which accordingly limit their applications significantly. In this paper, those analytic problems will be investigated, and the theorems of the modified z-transform will be revised by adopting a new notation so that those can be correctly interpreted and used without any analytic problems in the analysis of sampled data systems. Also some useful schemes of applying the modified z-transform will be developed.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2005년도 춘계학술대회 학술발표 논문집 제15권 제1호
• /
• pp.217-220
• /
• 2005

The RPO algorithm is a recently developed tool in the area of reinforcement Loaming, And it has been shown In be very successful in several application problems. In this paper, we consider a robot-control problem utilizing a modified RPO algorithm in which its critic network is adapted via RLS(Recursive Least Square) algorithm. We also developed a MATLAB-based animation program, by which the effectiveness of the training algorithms were observed.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 Proceedings of the Korea Automatic Control Conference, 11th (KACC); Pohang, Korea; 24-26 Oct. 1996
• /
• pp.185-188
• /
• 1996

In this paper, a fuzzy PNN algorithm is proposed to estimate the structure and parameters of fuzzy model, using the PNN based on GMDH algorithm. New algorithm uses PNN algorithm and fuzzy reasoning in order to identify the premise structure and parameter of fuzzy implications rules, and the leastsquare method in order to identify the optimal consequence parameters. Both time series data for gas furnace and data for wastewater treatment process are used for the purpose of evaluating the performance of the fuzzy PNN. The results show that the proposed technique can produce the fuzzy model with higher accuracy than other works achieved previously.