• Journal of the Korea Organic Resources Recycling Association
• /
• v.2 no.2
• /
• pp.19-29
• /
• 1994

A large volume of paper mill sludge(PMS) is produced every day from paper industries after treatments of waste water and it costs too much to dispose of the sludge. Since PMS consists mostly of biodegradable organic matter, cellulose, it is desirable to recycle it by proper treatments such as composting. In this study, experiments were conducted using a small scale reactor(12l) to establish optimum conditions for efficient composting of PMS of which initial pH, C/N ratio, and moisture content were 7.1, 28~30, and 60~65%, respectively. No heavy metals such as mercury, cadmimum, and lead were not detected in the PMS. Various levels of forced aeration, 1 minute aeration per every 30, 60, 120, 240, and 480 minutes were applied and 1 minute aeration per 60 and 120 minutes found to be proper for composting of 8l PMS in this system. Relationship between $CO_2$ production and temperatures was positively correlated with r> 0.82 suggesting that the normal decomposition of PMS by microorganisms occurred. However, under the condition of aeration interval over than 240 minutes, a negative relationship between two parameters was found indicating the occurrence of abnormal(maybe anaerobic) degradation. The amount of added nitrogen also affected composting of PMS resulting in the increase of $CO_2$ production and temperature. Semi-field tests using 100kg PMS in a static pile sysem showed that PMS could be composted efficiently under optimal environmental conditions. The parameters determining efficiency of composting such as C/N ratio, aeration, moisture content, and pH need to be monitored.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.10
• /
• pp.1363-1370
• /
• 2012

In this study, methanol extract and its organic solvent fractions were prepared from Prunus davidiana (Carriere) Franch. fruit. Antioxidative activities, polyphenolic and flavonoid contents, and tyrosinase inhibitory activities were evaluated. Among the fractions, ethyl acetate fraction showed the highest antioxidative activity with $IC_{50}$ values of 5.8 ${\mu}g/mL$ and 88.1 ${\mu}g/mL$ for DPPH radical and nitrite scavenging, respectively, which were comparable to those of ascorbic acid. Further, total flavonoid and polyphenolic contents were highest in the ethyl acetate fraction with $IC_{50}$ values of 244.5 mg/g and 210.2 mg/g, respectively. $IC_{50}$ values for tyrosinase inhibitory activity were 0.310 mg/mL and 0.329 mg/mL for the ethyl acetate and n-butanol fractions, respectively. Based on these results, it is suggested that the ethyl acetate fraction of Prunus davidiana (Carriere) Franch. fruit could be used as a functional material in the food and pharmaceutical industries.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.5 no.1
• /
• pp.8-15
• /
• 1995

The reliable measurement of metal in biological media in human body is one of critical indicators for the proper evaluation of its toxic effect on human health. Recently in Korea the necessity of quality assurance of measurement in occupational health and occupational hygiene fields brought out regulatory quality control program. Lead is often used as a standard metal for the program in both fields of occupational health and hygiene. During last 20 years lead poisoning was prevalent in Korea and still is one of main heavy metal poisoning and the capability of the measurement of blood lead is one of prerequisites for institute of specialized occupational health in Korea. Furthermore blood lead is most important indicator to evaluate lead burden of human exposure to lead and the reliable and accurate analysis is most needed whenever possible. To evaluate the extent of the interlaboratory differences of blood lead measurement in several well-known institute specialized in occupational health in Korea, authors prepared 68 blood samples from two storage battery industries and all samples were divided into samples with 2 ml. One set of 68 samples were analyzed by authors's laboratory(Soonchunhyang University Institute of Industrial Medicine: SIIM) and 40 samples of other set were analyzed by C University Institute of Industrial Medicine(CIIM) and the rest 28 samples of other set were analyzed by Japanese institute(K Occupational Health Center:KOHC). Authors also prepared test bovine samples which were obtained from Japanese Federation of Occupational Health Organization (JFOHO) for quality control. Authors selected 2 other well-known occupational health laboratories and one laboratory specialized for instrumental analysis. A total of 6 laboratories joined the interlaboratory comparison of blood lead measurement and the results obtained were as follows: 1. There was no significant difference in average blood lead between SIIM and CIIM in different group of blood lead concentration, and the relative standard deviation of two laboratories was less than 3.0%. On the other hand, there was also no significant difference of average blood lead between SIIM and KOHC with relative standard deviation of 6.84% as maximum. 2. Taking less than 15% difference of mean or less than 6 ug/dl difference in below 40 ug/dl in whole blood as a criteria of agreement of measurement between two laboratories, agreement rates were 87.5%(35/40) and 78.6%(22/28) between SIIM and CIIM, SIIM and KOHC respectively. 3. The correlation of blood lead between SIIM and CIIM was 0.975 (p=0.0001) and the regression equation was SIIM = 2.19 + 0.9243 ClIM, whereas the correlation between SUM and KOHC was O.965(p=0.0001) with the equation of SIIM = 1.91 + 0.9794 KOHC. 4. Taking the reference value as a dependent variable and each of 6 laboratories's measurement value as a independent variable, the determination coefficient($R^2$) of simple regression equations of blood lead measurement for bovine test samples were very high($R^2>0.99$), and the regression coefficient(${\beta}$) was between 0.972 and 1.15 which indicated fairly good agreement of measurement results.

• Journal of Korean Society of Forest Science
• /
• v.99 no.4
• /
• pp.611-617
• /
• 2010

The current studies aim is to analyze the production cost of walnut tree cultivation and its object was targeted at walnut tree cultivating household region 163. The analysis is as follows. Our domestic walnut tree cultivating households averagely have cultivated about 0.7ha, and planting number per ha was averagely 204, and it showed that compared to the standard planting number (100), the plantation was done close planted. The most cultivar cultivated according to regions were Chungbuk region: sangchon 65.7%, Chungnam region: kwangduk 68.6%, Jeonbuk region: sangchon 98.0%, Gyeongbuk region: daeboo 61.2%. The production cost for cultivating walnuts can be classified into the followings; management cost(4436 thousand won/ha) such as manufacturing cost(292 thousand won/ha), intermediate material cost(3682 thousand won/ha), rent(103 thousand won/ha), employment cost(653 thousand won/ha) etc, and self-serviced expenses such as self-laboring cost(5,834 thousand won/ha), land security cost(490 thousand won/ha), fixed capital cost(834 thousand won/ha), circulating capital cost(234 thousand won/ha) etc. 11,820 thousand won were invested for the production cost of walnut and it made 11,586 thousand won/ha(rate of investment 72.3%) profit, and the net income was 4,196 thousand won/ha(net income rate 26.2%), showing high amount of income. The manufactured walnuts were marketed in Nong-hyup 39.8%, wholesalers 20.8%, dealers 19.8% and recently, as the amount of goods marketed directly to consumers themselves have increased, the income has reached up to 18.9%. At the basis of making most of idle soil, walnut tree's cultivated regions are fairly small, and due to the characteristics of sideline management, it has its limits in searching for production policy locally and promotion strategy of industries. Therefore, if the basic database can be established, subjected only to full-time cultivating households, then not only would the differences between the imported walnuts be reinforced, it would also be possible to transfer into the new and improved distribution system. Furthermore, through establishment of the database, it can be anticipated that it would contribute greatly in the increase of the household income.

• Clean Technology
• /
• v.29 no.4
• /
• pp.255-261
• /
• 2023

Power semiconductors are semiconductors used for power conversion, transformation, distribution, and control. Recently, the global demand for high-voltage power semiconductors is increasing across various industrial fields, and optimization research on high-voltage IGBT components is urgently needed in these industries. For high-voltage IGBT development, setting the resistance value of the wafer and optimizing key unit processes are major variables in the electrical characteristics of the finished chip. Furthermore, the securing process and optimization of the technology to support high breakdown voltage is also important. Etching is a process of transferring the pattern of the mask circuit in the photolithography process to the wafer and removing unnecessary parts at the bottom of the photoresist film. Ion implantation is a process of injecting impurities along with thermal diffusion technology into the wafer substrate during the semiconductor manufacturing process. This process helps achieve a certain conductivity. In this study, dry etching and wet etching were controlled during field ring etching, which is an important process for forming a ring structure that supports the 3.3 kV breakdown voltage of IGBT, in order to analyze four conditions and form a stable body junction depth to secure the breakdown voltage. The field ring ion implantation process was optimized based on the TEG design by dividing it into four conditions. The wet etching 1-step method was advantageous in terms of process and work efficiency, and the ring pattern ion implantation conditions showed a doping concentration of 9.0E13 and an energy of 120 keV. The p-ion implantation conditions were optimized at a doping concentration of 6.5E13 and an energy of 80 keV, and the p+ ion implantation conditions were optimized at a doping concentration of 3.0E15 and an energy of 160 keV.

• the MEAT Journal
• /
• s.36 summer
• /
• pp.61-71
• /
• 2009

The aim of this work was to analyze the effects of salt and NaNO2 on weight loss, proximate compositions, chemical parameters and texture characteristics of dry-cured ham processed using Korean methods. Four different treatments were considered: The H8 group of 3 hams (11.30 kg) was salted with 9.2 g/kg salt (w/w) (high salt batch), the HS+NaNO2 group of 3 hams (10.65 kg) was salted same as HS group and added 100 ppm NaNO2. The LS group of 3 hams (11.42 kg) was salted with 6.2 g/kg salt (w/w) (Low salt batch), the LS+NaNO2 group of 3 hams (10.62 kg) was salted same as L8 group and added 100 ppm NaNO2. The highest weight losses took place at the drying stage (27.46, 28.25, 26.99, and 28.42%). However, there were no significant differences in the weight losses between treatments (p>0.05). The moisture content was significantly affected with addition of NaNO2 (p<0.05), the L8 hams had significantly higher moisture content than HS + NaNO2 and L8 + NaNO2 (p<0.05). The level of salt and NaNO2 did not affect the fat, protein and ash contents. The hardness and chewiness in biceps femoris muscle from L8 hams were significantly lower than in the muscles from HS + NaNO2 hams (p<0.05). The NaNO2 did not affect the texture characteristics of dry-cured hams. The processing conditions significantly affected the chemical parameters of biceps femoris muscle (p<0.05). The water activity in biceps femoris muscle from L8 hams was significantly higher than in muscles from HS and H8+NaNO2 hams (p<0.04). The salt content in biceps femoris muscles from LS + NaNO2 hams was significantly lower than in the muscles from HS and HS + NaNO2 hams (p<0.05). The NaNO2 treatment did not affect the NaNO2 content in biceps femoris muscles (p>0.05). The processing conditions did not significantly affect the lightness (L), redness (a), and $h^{\circ}$ of biceps femoris muscles (p>0.05). The yellowness (b) and chroma in biceps femoris muscle from HS + NaNO2 hams were significantly higher than in the muscles from HS and LS hams.

• Korean Journal of Food Science and Technology
• /
• v.11 no.1
• /
• pp.1-7
• /
• 1979

This experiment was carried out to investigate the nutritive value of brewery's activated sludge on the performance and nutrients utilization of egg type chicken of babcock fed the different levels of sludge. The chemical composition, content of amino acids and mineral in brewery's activated sludge were also analyzed. 3,6,9 and 12% of brewery's activated sludge were supplemented with basal ration as a substituted ingredient to soybean oil meal in experimental ration. The results obtained were as follow: 1. Chemical composition analysis 1) Brewery's activated sludge had 42.50% of crude protein on the air dried basis, and had 15,69% of crude ash, and had 2,060 kcal of metabolizable energy per kg of sludge. 2) Total amino acid content of brewery's activated sludge was 42.50% and 99% crude protein of brewery's activated sludge was a true amino acid, and brewery's activated sludge contained especially more methionine and threonine that those of soybean oil meal. 3) In case of mineral content of brewery's activated sludge, phosphorus, magnesium, copper and iron were plentifully included. However, calcium content in brewery's activated sludge was very low. 2. Feeding trial 1) Body gain of chicken fed the different levels of sludge was decreased in proportion to increasing level of sludge was decreased in proportion to increasing level of sludge. However, no statistical differences were found out between treatments. 2) Diet intake of chicken fed the different levels of sludge was significantly (p<0.05) increased as the supplementation level of sludge in ration increased. 3) Feed conversion of chicken fed the different levels of sludge was high in proportion to increasing level of sludge in ration. However, there were no significant differences between treatments. 3. Digestion trial 1) Utilization of dry matter of chicken fed the different levels of sludge was decreased as the level of sludge in ration increased. However, no statistical differences were found out between treatments. 2) Utilization of crude protein of chicken fed the different levels of sludge was significantly (p<0.01) increased as the level of sludge was higher. Utilization of crude protein of control treatment and of sludge 3% treatment was higher than that of other treatments. 3) Utilization of crude ash of chicken fed the different levels of sludge was significantly (p<0.05) decreased in proportion to increasing level of sludge in ration. 4) Utilization of NFE of chicken fed the different levels of sludge was slightly decreased in proportion to increasing level of sludge in ration. However, no statistical differences were found out between treatments. Therefore according to this experiment, it may be concluded that brewery's activated sludge can be supplemented with chicken ration by $6{\sim}9%$.

• Journal of Korea Port Economic Association
• /
• v.31 no.4
• /
• pp.53-73
• /
• 2015

This study analyzes the economic impact of the shipping and port logistics industry in Gwangyang Bay Area on the regional economy. For this purpose, the study constructs an input-output table of 29 sectors for 2010 in the area. The main findings are as follows. In terms of production, value added, and share of employment, the regional shipping and port logistics industry accounts for approximately 10.8 percent, 6.0 percent, and 2.9 percent of the national shipping and port logistics industry, respectively. Moreover, the economic impact of the industry on the regional economy is estimated to be an increase in terms of production of about 6 trillion Korean won), to be an increase in value added of about 2.5 million Korean won, and an increase of about 16,000 in employment. Furthermore, the industry is found to have strong inter-industry linkages with the main manufacturing as well as the main producer service industries.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.6 no.1
• /
• pp.67-76
• /
• 1996

This study was performed to estimate total dust concentrations and particle size distribution of wood dust in the furniture and sawmill industries. To compare total wood dust concentrations, two samplers recommended by the American Conference of Governmental Industrial Hygienists and by the National Institute for Occupational Safety and Health were used. Concentration data were analyzed by paired-t tests using the SAS program and two parameters of the particle size distributions were determined by histogram. The results were as follows: 1. Particle size distributions showed a unimodal pattern in cutting and a bimodal in sanding operations. Mass median aerodynamic diameters(MMAD) were $17.35{\mu}m$ in cutting, and $1.39{\mu}m$ for small mode and $18.89{\mu}m$ for large mode in sanding operations. The proportions of particle size larger than $9.8{\mu}m$ estimated by the impactor were 61.16 % in cutting and 62.33 % in sanding operations, respectively. 2. The average personal total dust concentrations measured by IPM sampler were $17.12mg/m^3$ (GSD=1.45) from indoor samples, $2.97mg/m^3$(GSD=1.90) from outdoor samples in cutting, and $8.01mg/m^3$(GSD=1.58) from sanding operation. And those of by 37 mm closed-face cassette were $9.12mg/m^3$(GSD=1.46), $1.06mg/m^3$(GSD=1.99) from cutting, and $3.32mg/m^3$(GSD=2.16) from sanding operations. 3. The average area total dust concentrations measured by IPM sampler were $1.88mg/m^3$(GSD=2.04) from indoor cutting, $4.76mg/m^3$(GSD=2.83) from indoor sanding operations. And those of by 37mm closed-face cassette were $0.49mg/m^3$(GSD=2.34) from cutting, and $1.32mg/m^3$(GSD=3.03) from sanding operations. 4. The ratio of personal total dust concentrations measured by 37 mm closed-face cassette to those by IPM sampler were 35.7 %, 53.3 % from cutting, and 41.4 % from sanding operations. 5. The ratio of area total dust concentrations measured by 37 mm closed-face cassette to those by IPM sampler were 26.1 % from cutting, and 27.7 % from sanding operations. 6. A statistically significant difference of total dust concentrations between the 37 mm closed-face cassette and the IPM sampler was found.

• Safety and Health at Work
• /
• v.6 no.3
• /
• pp.174-183
• /
• 2015

The major purpose of this study is to construct a retrospective exposure assessment for benzene through a review of literature on Korea. Airborne benzene measurements reported in 34 articles were reviewed. A total of 15,729 individual measurements were compiled. Weighted arithmetic means [AM(w)] and their variance calculated across studies were summarized according to 5-year period intervals (prior to the 1970s through the 2010s) and industry type. Industries were classified according to Korea Standard Industrial Classification (KSIC) using information provided in the literature. We estimated quantitative retrospective exposure to benzene for each cell in the matrix through a combination of time and KSIC. Analysis of the AM(w) indicated reductions in exposure levels over time, regardless of industry, with mean levels prior to the 1980-1984 period of 50.4 ppm (n = 2,289), which dropped to 2.8 ppm (n = 305) in the 1990-1994 period, and to 0.1 ppm (n = 294) in the 1995-1999 period. There has been no improvement since the 2000s, when the AM(w) of 4.3 ppm (n = 6,211) for the 2005-2009 period and 4.5 ppm (n = 3,358) for the 2010-2013 period were estimated. A comparison by industry found no consistent patterns in the measurement results. Our estimated benzene measurements can be used to determine not only the possibility of retrospective exposure to benzene, but also to estimate the level of quantitative or semiquantitative retrospective exposure to benzene.