• Journal of Animal Environmental Science
• /
• v.21 no.3
• /
• pp.113-122
• /
• 2015

An experiment was conducted to examine the effects of Kalopanax pictus Nakai (Kalopanax) on in vitro rumen fermentation and methane (CH4) reduction. Kalopanax trunk was extracted with 70% ethanol and 70% methanol. Rumen fluid, alfalfa hay and buffer (control: C) supplemented with 0.3% Kalopanx juice (T1), 0.3% ethanol extract (T2) and 0.3% methanol extract (T3) in the total volume of culture medium were incubated at $38^{\circ}C$ for 24h and 48h. Rumen pH was lower in all Kalopanax treatments during all incubations than that in control (p<0.05). Total VFA and total gas production in T2 and T3 was significantly higher than that in C at 48h incubation (p<0.05). Ammonia-N was decreased in all treatments compared with C during the incubation periods (p<0.05). At 24h incubation, $CH_4$ contents were significantly reduced by both alcohol extracts. It is concluded that supplementing Kalopanax extracts can stimulate ruminal fermentation of rumen microorganisms and inhibit methanogenesis.

• Journal of Mushroom
• /
• v.17 no.3
• /
• pp.99-106
• /
• 2019

To improve the productivity of shiitake mushroom (Lentinula edodes), seven different types of media for liquid spawn (denoted as "A" to "G") were prepared with 0.3% soybean meal and varying sugar and glucose concentrations. During 14 days of incubation, the pH of the liquid culture gradually acidified with increasing incubation period. Additionally, there was a significant, but not prominent, difference in the degree of acidification depending on the sugar to glucose ratio. Liquid spawn culture "G," which had the highest sugar content was the most acidic on the last day of incubation. Mycelium dry weight increased significantly with increasing incubation period, and there was no significant difference in mycelium dry weight irrespective of the sugar to glucose ratio even after 14 days of culture. The inoculation of liquid spawn in sawdust medium with an inoculation volume ${\geq}45mL$ and incubation period of 15 to 18 days were the optimal culture conditions. Productivity of fruit bodies in sawdust medium and mushrooms treated with liquid spawn was significantly higher compared to solid spawn treatment. The mushrooms treated with liquid spawn had better chewiness, and the free amino acid content, which is associated with savory taste, was higher in these mushrooms compared to those treated with solid spawn.

• Korean Journal of Ichthyology
• /
• v.22 no.3
• /
• pp.195-200
• /
• 2010

A large volume of hatching jar was tested whether it is an effective to hatch fertilized eggs of Pacific cod. The volume of hatching jar did not show any significant differences in survival of the fertilized eggs; 48.3% for the jar of 15 L and 50.4% for that of 42 L. Survival rate of the fertilized eggs in a large volume of hatching jar ranged from 40.0 to 71.2%, which was higher than those of conventional small circular tank. A higher survival could be achieved even though stocking density of fertilized eggs was as high as 5,000 mL/jar. Consequently, the tested hatching jar allowed for incubation of a greater number of eggs with higher survival rate in a much smaller space. In addition, it reduces costs and manpower, and requires a relatively small amount of water per individual unit (6,700 mL/min), and provides a way to incubate multiple rearing groups in a quarantine environment.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.23 no.2
• /
• pp.95-100
• /
• 2003

The alfalfa (Medicago sativa L.) callus was induced from seeds on SH medium contained $3\;mg/{\ell}$ of 2,4-D. Several regenerated alfalfa plants and many shoots were obtained by procedure of Kim et al. (1999); 1) incubation for 28~30 days on SH medium added $5\;mg/{\ell}$ of NAA and $2\;mg/{\ell}$ of Kinetin, 2) incubation for 3~5 days on SH medium added $11\;mg/{\ell}$ of 2,4-D and $1\;mg/{\ell}$ of kinetin. 3) incubation for 21~25 days on SH medium added $1.6\;g/{\ell}$ of ammonium sulfate and $5.75\;g/{\ell}$ of proline. To increase of root induction ratio on plant regeneration process of alfalfa, root induction ratio was examined on 8 kinds of medium, containing different amount of hormone and SH salt. Root induction ratio was higher on SH medium contained IBA than SH basal medium. In case 1.5 mg of IBA was added in SH medium, root induction ratio was the highest to 56.0% in this study. On the other hand, root induction ratio was higher on SH medium diminished SH salt amount to half volume and addition of IBA makes high root induction ratio, too. Thus, we conclude that the medium for root induction of alfalfa may be added $1.5\;mg/{\ell}$ of IBA and diminished SH salt amount to half volume.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.132-132
• /
• 2011

For the programming volume of PRAM, Ge2Sb2Te5(GST) thin films have been dominantly used and prepared by physical vapor deposition (PVD), chemical vapor deposition (CVD), atomic layer deposition (ALD). Among these methods, ALD is particularly considered as the most promising technique for the integration of PRAM because the ALD offers a superior conformality to PVD and CVD methods and a digital thickness control precisely to the atomic level since the film is deposited one atomic layer at a time. Meanwhile, although the IST has been already known as an optical data storage material, recently, it is known that the IST benefits multistate switching behavior, meaning that the IST-PRAM can be used for mutli-level coding, which is quite different and unique performance compared with the GST-PRAM. Therefore, it is necessary to investigate a possibility of the IST materials for the application of PRAM. So far there are many attempts to deposit the IST with MOCVD and PVD. However, it has not been reported that the IST can be deposited with the ALD method since the ALD reaction mechanism of metal organic precursors and the deposition parameters related with the ALD window are rarely known. Therefore, the main aim of this work is to demonstrate the ALD process for IST films with various precursors and the conformal filling of a nano size programming volume structure with the ALD?IST film for the integration. InSbTe (IST) thin films were deposited by ALD method with different precursors and deposition parameters and demonstrated conformal filling of the nano size programmable volume of cell structure for the integration of phase change random access memory (PRAM). The deposition rate and incubation time are 1.98 A/cycle and 25 cycle, respectively. The complete filling of nano size volume will be useful to fabricate the bottom contact type PRAM.

• Journal of Embryo Transfer
• /
• v.29 no.1
• /
• pp.59-66
• /
• 2014

Transcription activator like effector nucleases (TALENs) are artificial restriction enzymes generated by fusing a TALE DNA binding domain to a DNA cleavage domain which remove and introduce specific genes to produce transgenic animals. To investigate the efficient laboratory techniques for the injection of TALEN mRNA, pEGFP-N1 commercial plasmid were microinjected into porcine parthenogenetic and in vitro fertilization (IVF). In Experiment 1, to investigate injection time, compared 4 different time durations (2 hr, 4 hrs, 6 hrs & 8 hrs) after post activation of parthenogenetic embryos and after 6 hrs of co-incubation with sperms in IVF embryos. There were significant difference (P<0.05) in development to the blastocysts (4.4, 8.9, 3.9, 0.6%), GFP expression in blastocysts (1.3, 5.7, 2.3, 0.0%) which injected after post activation of 4 hrs compared with other 3 groups. IVF embryos after 2 hrs and 4 hrs injected were expressed GFP significantly higher than rest of two groups (P<0.05). In Experiment 2, compared development of 2 different concentrations ($20ng/{\mu}l$ and $50ng/{\mu}l$) of EGFP injection. There were significant difference (P<0.05) between two treatments which has higher cleavage (58.8 vs 41.9%), blastocysts development rate (13.0 vs 11.1%) and GFP expressed blastocysts (5.7 vs 0.0%) in $20ng/{\mu}l$ than the $50ng/{\mu}l$ in parthenogenetic embryos. In IVF embryos, only $20ng/{\mu}l$ injected embryos were expressed GFP (4.2%) after 7 days of incubation and 77.3 vs 64.7% of cleavage, 26.4 vs 23.5% development to blastocysts. In Experiment 3, three different volumes (5, 10 and 20 pl) were microinjected into porcine embryos to determine the most appropriate volume. Out of 3 groups, significantly higher development rates of cleavage (68.3, 58.0, 29.3%), blastocysts (11.7, 12.7, 0.5%) and GFP expressed blastocysts (2.9, 7.8, 0.0%) were shown in the 10 pl group (P<0.05). In conclusion, these results imply that $20ng/{\mu}l$ concentration, 10 pl of volume and injection at 4 hrs after post activation for parthenogenetic and 2~4 hrs after IVF, $20ng/{\mu}l$ concentration and 10 pl volume for IVF embryos were more effective microinjection conditions.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.28 no.6
• /
• pp.1275-1282
• /
• 1999

To investigate the effect of flour brew with bifidobacteria on bread characteristics, flour brew with bifidobacteria was added to baking after 16 hour incubation at 37oC. The more addition of flour brew, the higher gassing power, the better machinality of dough were obtained, resulting in the larger specific volume of bread. Flavor profile analyzed by Electronic Nose System showed that flavor components of 30% flour brew were decreased comparing with those of control and there was shown definite difference in sensory characteristics between them. Staling studies of bread containing flour brew indicated had a definite effect in retarding the staling rate of bread, with time constant calculated in 30% treatment being 3.09 days and in control being 2.08 days. The enthalphy of gelatinization was decreased from 2.51J/g to 0.61J/g with increment of flour brew, suggesting that starch crystallization is delayed. conclusion, Flour brew fermented by bifidobacteria can be used as a natural bread improver with so many benefits as better machinality, one more day storage period, slower staling rate, better bread volume and more appealing bread flavor.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.203-203
• /
• 2010

Nano-crystalline Si thin films were deposited on polymer and glass by inductively coupled plasma (ICP) - assisted RF magnetron sputtering at low temperature in an argon and hydrogen atmosphere. Internal ICP coil was installed to increase hydrogen atoms dissociated by the induced magnetic field near the inlet of the working gases. The microstructure of deposited films was investigated with XRD, Raman spectroscopy and TEM. The crystalline volume fraction of the deposited films on polymer was about 70% at magnetron RF power of 600W and ICP RF power of 500W. Crystalline volume fraction was decreased slightly with increasing magnetron RF power due to thermal damage by ion bombardment. The diffraction peak consists of two peaks at $28.18^{\circ}$ and $47.10^{\circ}\;2{\theta}$ at magnetron RF power of 600W and ICP RF power of 500W, which correspond to the (111), (220) planes of crystalline Si, respectively. As magnetron power increase, (220) peak disappeared and a dominant diffraction plane was (111). In case of deposited films on glass, the diffraction peak consists of three peaks, which correspond to the (111), (220) and (311). As the substrate temperature increase, dominant diffraction plane was (220) and the thickness of incubation (amorphous) layer was decreased.

• Journal of the Korean Electrochemical Society
• /
• v.25 no.1
• /
• pp.13-21
• /
• 2022

There is an increasing interest in monitoring of specific biomarker for determining progression of a disease or efficacy of a treatment. Conventional method for quantification of specific biomarkers as enzyme linked immunosorbent assay (ELISA) has high material costs, long incubation periods, requires large volume of samples and involves special instruments, which necessitates clinical samples to be sent to a lab. This paper reports on the development of an electrochemical biosensor to measure total immunoglobulin E (IgE), a marker of asthma disease that varies with age, gender, and disease in concentrations from 0.3-1000 ng/mL with consuming 20 µL volume of whole blood sample. The sensor provides rapid, accurate, easy, point-of-care measurement of IgE, also, sequential monitoring of total IgE with ovalbumin (OVA) induced mice is another application of sensor. Taken together, these results provide an alternative way for detection of biomarkers in whole blood with low volumes and long-term ex-vivo assessments for understanding the progression of a disease.

• Applied Chemistry for Engineering
• /
• v.26 no.4
• /
• pp.394-399
• /
• 2015

In this study, the Cu catalyst decorated with activated carbon fibers were prepared for improving $SO_2$ adsorption properties. Flame retardant and heat treatments of Lyocell fibers were carried out to obtain carbon fibers with high yield. The prepared carbon fibers were activated by KOH solution for the high specific surface area and controlled pore size to improve $SO_2$ adsorption properties. Copper nitrate was also used to introduce the Cu catalyst on the activated carbon fibers (ACFs), which can induce various reactions in the process; i) copper nitrate promotes the decomposition reaction of oxygen group on the carbon fiber and ii) oxygen radical is generated by the decomposition of copper oxide and nitrates to promote the activation reaction of carbon fibers. As a result, the micro and meso pores were formed and Cu catalysts evenly distributed on ACFs. By Cu-impregnation process, both the specific surface area and micropore volume of carbon fibers increased over 10% compared to those of ACFs only. Also, this resulted in an increase in $SO_2$ adsorption capacity over 149% than that of using the raw ACF. The improvement in $SO_2$ adsorption properties may be originated from the synergy effect of two properties; (i) the physical adsorption from micro, meso and specific surface area due to the transition metal catalyst effect appeared during Cu-impregnation process and ii) the chemical adsorption of $SO_2$ gas promoted by the Cu catalyst on ACFs.