• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.1
• /
• pp.18-24
• /
• 2016

The purpose of this study is to induce the ductile behavior of the Ultra High Perfomance Concrete Reinforced I beam by substituting the part of steel fiber for bundle of reinforcing bars. Experiment of flexural behavior of the Ultra High Performance Concrete I shaped beam with the combination of the steel fiber and bundle of reinforcement bars was carried out. The volume fractions of steel fiber are 0%, 0.7%, 1%, 2%. The bundle of reinforcing bars and prestressing wire are used to restrain the concrete in compression zone. Length of bundle of reinforcing bar and prestressing wire is the one of test factors. The 9 Reinforced UHPC I shaped beam were made with these test factors. Not only steel fiber but also bundle of longitudinal reinforcing bar has effect to induce the ductile behavior of Reinforced UHPC I beam. The combination of 0.7% or 1.0% steel fiber and bundle of reinforcing bar showed the effective ductile behavior of I beam. The relationship of load-deflection and the crack pattern indicate the usefulness of the bundle of the longitudinal bar which has small diameter with close arrangement each other.

• Journal of the Korean Wood Science and Technology
• /
• v.21 no.1
• /
• pp.59-64
• /
• 1993

The purpose of this study is to investigate the preparation of the carboxymethylcellulose from recycled fiber, especially on the reactivity of carboxymethylation. Using a deinked pulp and a dissolving pulp. Green's method is adapted to the carboxymethylation. We conformed that the carboxymethyl group is led for recycled fiber by FT-IR analysis. The recycled fiber is more reactive than the dissolving pulp because the recycled fiber had been defiberated and pretreated with alkali. It suggests that deinking process is in accordance with pretreatment of CMC process. Therefore, it may be possible to prepare CMC from the recylced fiber economically.

• Textile Coloration and Finishing
• /
• v.13 no.1
• /
• pp.18-22
• /
• 2001

Effects of cationic surfactants old the wetting behavior of the DMDHEU treated cotton fibers were investigated using a technique based on the Wilhelmy principle. The results indicated that Interactions between the fiber and water ill the interface make contributions to wettability of the cotton fiber surface because of reorientation of polar groups at the interface. The effects of types and concentration of cationic surfactant on the wettability of both control and durable press(DP) finished cotton fiber are discussed. Below and near the critical micelle concentration(cmc), the adsorption of hexadecyltrimethylammoniumbromide(HTAB) on the control fiber makes the fiber surface more hydrophobic. Near and above the cmc of octadecyltrimethylammouniumbromide(OTAB) , the decrease in advancing contact angles indicates that the control cotton surface became hydrophilic. By the adsorption of both HTAB and OTAB onto the fiber surface, the hydrophobicity of the DP finished fiber surface became mere hydrophilic.

• Textile Coloration and Finishing
• /
• v.18 no.2 s.87
• /
• pp.1-7
• /
• 2006

In order to prepare PAN nano fiber web, PAN/DMF solution was prepared and electrospun. The diameter of fiber was depended on the polymer concentration (7.5-15wt%) and the applied voltage (10-16kV). The average diameter of fiber increased with an increase of the polymer concentration and decreased with the applied voltage. At 7.5wt% concentration, many beads were found. So, we prepared a nano PAN fiber by electrospinning at concentration of 10wt% and 16kV. PAN fibers were reduced with litium aluminium hydride and the dyeability to acid dye was checked. The reduced nano PAN fiber showed much better dyeability compared with the reduced ordinary PAN fiber. It was considered that the increase of specific surface area have an important role in dyeing with acid dye.

• Journal of Power System Engineering
• /
• v.4 no.3
• /
• pp.48-54
• /
• 2000

This paper describes the effect of molding pressure, specimen geometries for Mixed Mode I/II interlaminar fracture toughness of carbon fiber reinforced plastic composites by using asymmetrical double cantilever beam(ADCB) specimen. The value of $G_{I/IIC}$ as a function of various molding pressure is almost same at 307, 431, 585 kPa. However it shows the highest value under 307 kPa molding pressure. The effect of $G_{I/IIC}$ due to the change of initial crack length of ADCB specimen was almost negligible in this study. It turns out that the condition for mix mode quasi-static crack growth in ADCB specimen is the ratio of the crack length to that of the specimen, i.e., ${\alpha}/L<0.4$.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.9
• /
• pp.1086-1093
• /
• 2011

To fabricate the aluminum alloys with good drawability, the textures evolution of the AA5182 sheets due to the change of lid parameter after rolling and subsequent annealing was studied. The measurement of the deformation textures was carried out for the sheets with high reduction ratio and the change of the recrystallization texture was investigated after heat-treatments of the rolled sheets in various I/d parameters. Rolling without lubrication and subsequent annealing led to the formation of favorable rot-$C_{ND}$ {001}<110> and ${\gamma}$-fiber ND//<111> textures in AA5182 sheets. From the results, the ${\gamma}$-fiber ND//<111> component well evolved during rolling at high lid parameter of 6.77. The initial shear deformation texture, especially, ${\gamma}$-fiber ND//<111> was not rotated during heat treatment in holding time of 180~7,200 seconds on AA5182 with I/d parameter of 6.77. Therefore, the AA5182 sheets were fabricated by controlling I/d parameter having well evolved ${\gamma}$-fiber ND//<111> which was advantageous in good drawability of the sheets.

• Textile Coloration and Finishing
• /
• v.1 no.1
• /
• pp.47-53
• /
• 1989

The effect of organic solvent in the dyeing of silk fiber by acid dye was investigated. Acetophenone and benzyl alcohol were shown to be the most effective for the rate of dyeing of silk fiber by Milling Cyanine 5R (C.I. Acid Blue 113), a milling type acid dye, but, with benzyl alcohol, the equilibrium dye uptake was much lower than that in the absence of it. In the presence of solvent, maximum dye uptake shifted to lower temperature than 6$0^{\circ}C$, while without solvent, it was shown at about $60^\circ{C}$. When dyed by Orange II (C.I. acid Orange 7) under same condition equilibrium dye uptake of silk fiber was lower than that for milling type acid dye, and in the presence of benzyl alcohol, still much lower uptake resulted. All these fact reveals that organic solvents in the solvent-assisted dyeing of silk fiber broaden micelle spacings too much, resulting in increased rate of dyeing, and decreased equilibrium dye uptake, contrary to wool.

• Textile Coloration and Finishing
• /
• v.25 no.1
• /
• pp.75-81
• /
• 2013

Colorimetric and wash fastness data after repeated wash cycles of Poly Lactic Acid(PLA) fiber were examined with C. I. Vat Blue 1, also other comparing 2 dyes (C. I. Vat Blue 35, C. I. Vat Blue 5), in this study. The fastness of three vat dyes on PLA fiber to repeated washing according to KS K 0430 A-2 regulation increased with dyeing temperatures. The $L^*$ values of the dyed material gradually increased with increasing numbers of wash. Also the f(k) values were decreased reversely. During repeated washing, the vagrant dyes were deposited especially on nylon, polyester, cotton of the adjacent multifiber. C. I. Vat Blue 5 displayed lowest color change to repeated washing of the three dyes used.

• Proceedings of the Korean Fiber Society Conference
• /
• 1990.06b
• /
• pp.29-29
• /
• 1990

• Proceedings of the Korean Fiber Society Conference
• /
• 1991.06a
• /
• pp.46-46
• /
• 1991