• Korean Journal of Food Science and Technology
• /
• v.38 no.5
• /
• pp.635-641
• /
• 2006

In an attempt to find ways of improving the quality and sanitary state of dried squid, this study compared artificial drying methods i.e. hot air drying and cold air drying with natural drying method. The drying rates of squid were in the order of hot air, cold air and natural drying. However, cold-air drying was slower than natural drying at $7^{\circ}C$. The drying rates increased with increasing drying temperature. When drying temperature was close to the dew point on a dehumidifier surface, which was the case with cold air drying at $7^{\circ}C$, the driving force for dehumidification was lower than under other drying conditions, which resulted in a lower drying rate. There were little color differences between the drying methods and temperature. Squid dried by cold air-drying had better mechanical texture and sensory qualities than with other drying methods. In addition, the cold air drying method maintained superior quality in terms of the contents of amino acids, taurine, EPA, DHA, other fatty acids and a low TBA value than the other drying methods.

• International Journal of Highway Engineering
• /
• v.19 no.2
• /
• pp.45-53
• /
• 2017

PURPOSES: The objectives of this study are to develop a new cold-applied crack sealant and to evaluate its properties and field applicability by comparing with other conventionally used crack sealants. METHODS : A new cold-applied crack sealant was developed by using neoprene latex to improve material properties. The fundamental properties such as viscosity, residue %, penetration, and softening point of the developed crack sealant were tested by TxDOT criteria to evaluate crack sealing capability. Moreover, the performance of the developed cold-applied crack sealant was evaluated under both laboratory and field conditions. In the laboratory, the bond property was evaluated using the developed cold-applied crack sealant and conventional hot-applied crack sealant by the bond-properties test standardized under ASTM D 6690. In the field, test sections were constructed on three areas: a trunk road, bus-only lane, and motorway, with the developed crack sealant and three conventional crack sealants. After construction, early field-inspection was performed on the test sections. RESULTS AND CONCLUSIONS : Overall, the developed cold-applied crack sealant demonstrates reasonable storage stability, durability, and bond property compared to conventional hot-applied crack sealants. From the test sections, it was established that the developed cold-applied crack sealant does not pose construction issues. Moreover, the early performance was verified through field inspection. However, as the field inspection was conducted a week after the construction, it is necessary to conduct an inspection of performance from a long-term point of view.

• Journal of KIISE:Computer Systems and Theory
• /
• v.35 no.1
• /
• pp.18-29
• /
• 2008

NAND Flash memory has been growing popular storage device for the last years because of its low power consumption, fast access speed, shock resistance and light weight properties. However, it has the distinct characteristics such as erase-before-write architecture, asymmetric read/write/erase speed, and the limitation on the number of erasure per block. Due to these limitations, various Flash Translation Layers (FTLs) have been proposed to effectively use NAND flash memory. The systems that adopted the conventional FTL may result in severe performance degradation by the hot data which are frequently requested data for overwrite in the same logical address. In this paper, we propose a novel FTL algorithm called Adaptive Flash Translation Layer (AFTL) which uses sector mapping method for hot data and log-based block mapping method for cold data. Our system removes the redundant write operations and the erase operations by the separating hot data from cold data. Moreover, the read performance is enhanced according to sector translation that tends to use a few read operations. A series of experiments was organized to inspect the performance of the proposed method, and they show very impressive results.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.2
• /
• pp.1-10
• /
• 1999

Direct extraction of FET's small signal model parameters needs predetermined parasitic elements usually obtained under forward cold FET conditionl This paper derives analytic intrinsic model for cold FET's and shows that normal cold FET condition can replace forward cold FET condition for extracting parasitic elements. Then, we track the error of hot FET's small signal model bounded by the cold FET condition and examine the validness of cold parasitic resistances by checking the existence of the error minimum.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1995.06a
• /
• pp.135-144
• /
• 1995

Cold Forging has advantage in high accuracy and short working time. However large-skzed and complicated parts are difficult to process with cold forging. Thus large-sized and complicated parts have been processed with two pieces, or combind forging that is hot forging in addition to cold sizing. Recently, large-sized and complicated parts can be manufactured with cold forging alone by advanced cold forging technology using the long-stroke press. In this paper, cold forging technology of large-sized and complicated parts are investigated, including tripod slide housing for constant velocity joint and drive shaft for starter.

• Food Science and Preservation
• /
• v.23 no.7
• /
• pp.1018-1025
• /
• 2016

To investigate biological activities in Aronia melanocarpa various drying methods were employed such as vacuum freeze drying, hot air drying and cold air drying. DPPH radical scavenging activity and ABTS radical scavenging activity of vacuum freeze dried Aronia melanocarpa was higher than hot and cold air dried Aronia melanocarpa. Vacuum freeze drying method showed the greatest contents of total phenol (15.34 g GAE/100 g), flavonoid (3.10 g GE/100 g) and tannin (2.46 g TE/100 g). Total anthocyanin content decreased to 163.52 mg C3G/100 g and 50.15 mg C3G/100 g for hot and cold air drying, respectively. Vacuum freeze-dried method increased the total anthocyanin content (743.09 mg C3G/100 g) when compared with fresh Aronia melanocarpa (163.52 mg C3G/100 g). Total proanthocyanidin content of vacuum freeze dried Aronia melanocarpa has increased to 6.21 g CE/100 g more than eight times compared with fresh Aronia melanocarpa (0.71 g CE/100 g). Chlorogenic acid and neochlorogenic acid content of vacuum freeze dried Aronia melanocarpa were higher than hot air dried and cold air dried Aronia melanocarpa, increasing about three times compared with fresh Aronia melanocarpa. These results suggested that vacuum freeze drying is optimal drying method to enhance biological activities in Aronia melanocarpa.

• Journal of the Korean Regional Science Association
• /
• v.34 no.4
• /
• pp.19-34
• /
• 2018

The purpose of this study is to analyze the seasonal issues using the local newspaper articles with the keyword beach from 2004 to 2017. Topic modeling and Time series regression analysis based on open source programs were performed for analysis. Topic modeling results showed 35 topics in spring, 47 topics in summer, 36 topics in autumn and 35 topics in winter. The common themes were 'beaches', 'festivals and events', 'accident and environmental issues', 'tourism', 'development and sale', 'administration and policy' and 'weather'. Time series regression analysis showed in the spring, 5 Hot-Topics and 2 Cold-Topic were found out of the 35 topics. In the summer, 6 Hot-Topics and 3 Cold-Topic were found out of the 47 topics. In the autumn, 4 Hot-Topics and 3 Cold-Topic were found out of the 36 topics. In the winter, 3 Hot-Topics and 3 Cold-Topic were found out of the 35 topics. And for each season, topics that do not fall into the Hot-Topic and Cold-Topic are classified as Neutral-Topic. In this study if seasonal uses are different such as beaches are deemed that seasonal topic modeling for analysis of regional issues will yield more useful results and enable detailed diagnosis.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.05a
• /
• pp.411-414
• /
• 2008

In order to study the effect of lubrication during hot rolling, ferritic stainless steel (FSS) sheet were hot-rolled with and without application of lubrication. The effect of two hot rolling processes on the evolution of texture and microstructure after hot rolling, cold rolling and subsequent recrystallization annealing was studied by means of macro-texture analysis and microstructure observations. After hot rolling, the specimen rolled with lubrication showed rolling textures at the sheet surface, while the specimen rolled without lubrication displayed shear textures in the outer layers of the sheet. Hot rolling with lubrication was beneficial to the formation of strong recrystallization textures at sheet surface. However, hot rolling with lubrication led to the formation of orientation colonies in outer thickness layers of the recrystallized sheet.

• Economic and Environmental Geology
• /
• v.41 no.1
• /
• pp.15-32
• /
• 2008

The hydrochemical and isotopic (stable isotopes and noble gas isotopes) analyses for hot spring waters, cold groundwaters and surface water samples from the Seokmodo hot spring area of the Ganghwa province were carried out to characterize the hydrogeochemical characteristics of thermal waters and to interpret the source of thermal water and noble gases and the geochemical evolution of hot spring waters in the Seokmodo geothermal system. The hot spring waters and groundwaters show a weakly acidic condition with the pH values ranging from 6.42 to 6.77 and 6.01 to 7.71 respectively. The outflow temperature of the Seokmodo hot spring waters ranges from $43.3^{\circ}C\;to\;68.6^{\circ}C$. Relatively high values of the electrical conductivities which fall between 60,200 and $84,300{\mu}S/cm$ indicate that the hot spring waters were mixed with seawater in the subsurface geothermal system. The chemical compositions of the Seokmodo hot spring waters are characterized by Na-Ca-Cl water type. On the other hand, cold groundwaters and surface waters can be grouped into three types such as the Na(Ca)-$HCO_3$, Na(Ca)-$SO_4$ and Ca-$HCO_3$ types. The ${\delta}^{18}O\;and\;{\delta}D$ values of hot spring waters vary from -4.41 to -4.47%o and -32.0 to -33.5%o, respectively. Cold groundwaters range from -7.07 to -8.55%o in ${\delta}^{18}O$ and from -50.24 to -59.6%o in ${\delta}D$. The oxygen and hydrogen isotopic data indicate that the hot spring waters were originated from the local meteoric water source. The enrichments of heavy isotopes ($^{18}O\;and\;^2H$) in the Seokmodo hot spring waters imply that the thermal water was derived from the diffusion Bone between fresh and salt waters. The ${\delta}^{34}S$ values ranging from 23.1 to 23.5%o of dissolved sulfate are very close to the value of sea water sulfate of ${\delta}^{34}$S=20.2%o in this area, indicating the origin of sulfate in hot springs from sea water. The $^3H/^4He$ ratio of hot spring waters varies from $1.243{\times}10^{-6}\;to\;1.299{\times}10^{-6}cm^3STP/g$, which suggests that He gas in hot spring waters was partly originated from a mantle source. Argon isotopic ratio $(^{40}Ar/^{36}Ar=298{\times}10^{-6}cm^3STP/g)$ in hot spring waters corresponds to the atmospheric value.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.221-222
• /
• 2011